@@ -20,6 +20,7 @@
#include <linux/usb/typec_altmode.h>
#include <linux/usb/typec_dp.h>
#include <linux/usb/typec_mux.h>
+#include <linux/usb/typec_retimer.h>
#include <linux/usb/typec_tbt.h>
#include <linux/usb/role.h>
@@ -53,6 +54,7 @@ struct cros_typec_port {
struct usb_pd_identity c_identity;
struct typec_switch *ori_sw;
struct typec_mux *mux;
+ struct typec_retimer *retimer;
struct usb_role_switch *role_sw;
/* Variables keeping track of switch state. */
@@ -142,6 +144,12 @@ static int cros_typec_get_switch_handles(struct cros_typec_port *port,
goto mux_err;
}
+ port->retimer = fwnode_typec_retimer_get(fwnode);
+ if (IS_ERR(port->retimer)) {
+ dev_dbg(dev, "Retimer handle not found.\n");
+ goto retimer_sw_err;
+ }
+
port->ori_sw = fwnode_typec_switch_get(fwnode);
if (IS_ERR(port->ori_sw)) {
dev_dbg(dev, "Orientation switch handle not found.\n");
@@ -159,6 +167,8 @@ static int cros_typec_get_switch_handles(struct cros_typec_port *port,
role_sw_err:
typec_switch_put(port->ori_sw);
ori_sw_err:
+ typec_retimer_put(port->retimer);
+retimer_sw_err:
typec_mux_put(port->mux);
mux_err:
return -ENODEV;
@@ -203,6 +213,21 @@ static void cros_typec_unregister_altmodes(struct cros_typec_data *typec, int po
}
}
+/*
+ * Map the Type-C Mux state to retimer state and call the retimer set function. We need this
+ * because we re-use the Type-C mux state for retimers.
+ */
+static int cros_typec_retimer_set(struct typec_retimer *retimer, struct typec_mux_state state)
+{
+ struct typec_retimer_state rstate = {
+ .alt = state.alt,
+ .mode = state.mode,
+ .data = state.data,
+ };
+
+ return typec_retimer_set(retimer, &rstate);
+}
+
static int cros_typec_usb_disconnect_state(struct cros_typec_port *port)
{
port->state.alt = NULL;
@@ -211,6 +236,7 @@ static int cros_typec_usb_disconnect_state(struct cros_typec_port *port)
usb_role_switch_set_role(port->role_sw, USB_ROLE_NONE);
typec_switch_set(port->ori_sw, TYPEC_ORIENTATION_NONE);
+ cros_typec_retimer_set(port->retimer, port->state);
return typec_mux_set(port->mux, &port->state);
}
@@ -381,9 +407,14 @@ static int cros_typec_init_ports(struct cros_typec_data *typec)
static int cros_typec_usb_safe_state(struct cros_typec_port *port)
{
+ int ret;
port->state.mode = TYPEC_STATE_SAFE;
- return typec_mux_set(port->mux, &port->state);
+ ret = cros_typec_retimer_set(port->retimer, port->state);
+ if (!ret)
+ ret = typec_mux_set(port->mux, &port->state);
+
+ return ret;
}
/*
@@ -480,7 +511,11 @@ static int cros_typec_enable_dp(struct cros_typec_data *typec,
port->state.data = &dp_data;
port->state.mode = TYPEC_MODAL_STATE(ffs(pd_ctrl->dp_mode));
- return typec_mux_set(port->mux, &port->state);
+ ret = cros_typec_retimer_set(port->retimer, port->state);
+ if (!ret)
+ ret = typec_mux_set(port->mux, &port->state);
+
+ return ret;
}
static int cros_typec_enable_usb4(struct cros_typec_data *typec,
@@ -569,7 +604,10 @@ static int cros_typec_configure_mux(struct cros_typec_data *typec, int port_num,
} else if (port->mux_flags & USB_PD_MUX_USB_ENABLED) {
port->state.alt = NULL;
port->state.mode = TYPEC_STATE_USB;
- ret = typec_mux_set(port->mux, &port->state);
+
+ ret = cros_typec_retimer_set(port->retimer, port->state);
+ if (!ret)
+ ret = typec_mux_set(port->mux, &port->state);
} else {
dev_dbg(typec->dev,
"Unrecognized mode requested, mux flags: %x\n",
Where available, obtain the handle to retimer switch specified via firmware, and update the mux configuration callsites to add retimer support for supported modes. Signed-off-by: Prashant Malani <pmalani@chromium.org> --- Changes since v2: - No changes. Changes since v1: - No changes. drivers/platform/chrome/cros_ec_typec.c | 44 +++++++++++++++++++++++-- 1 file changed, 41 insertions(+), 3 deletions(-)