diff mbox series

[v5,09/13] iio: adc: mt6370: Add MediaTek MT6370 support

Message ID 20220715112607.591-10-peterwu.pub@gmail.com (mailing list archive)
State Superseded
Headers show
Series Add MediaTek MT6370 PMIC support | expand

Commit Message

ChiaEn Wu July 15, 2022, 11:26 a.m. UTC
From: ChiaEn Wu <chiaen_wu@richtek.com>

MediaTek MT6370 is a SubPMIC consisting of a single cell battery charger
with ADC monitoring, RGB LEDs, dual channel flashlight, WLED backlight
driver, display bias voltage supply, one general purpose LDO, and the
USB Type-C & PD controller complies with the latest USB Type-C and PD
standards.

This adds support the MT6370 ADC driver for system monitoring, including
charger current, voltage, and temperature.

Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
---

v5
- Replace using snprintf() with sysfs_emit() in mt6370_adc_read_label()
- Remove macro ADC_CONV_TIME_US
- Revise all variable ordering
- Revise the description of Kconfig help text
- Revise MODULE_DESCRIPTION()
---
 drivers/iio/adc/Kconfig      |  12 ++
 drivers/iio/adc/Makefile     |   1 +
 drivers/iio/adc/mt6370-adc.c | 273 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 286 insertions(+)
 create mode 100644 drivers/iio/adc/mt6370-adc.c

Comments

AngeloGioacchino Del Regno July 15, 2022, 12:38 p.m. UTC | #1
Il 15/07/22 13:26, ChiaEn Wu ha scritto:
> From: ChiaEn Wu <chiaen_wu@richtek.com>
> 
> MediaTek MT6370 is a SubPMIC consisting of a single cell battery charger
> with ADC monitoring, RGB LEDs, dual channel flashlight, WLED backlight
> driver, display bias voltage supply, one general purpose LDO, and the
> USB Type-C & PD controller complies with the latest USB Type-C and PD
> standards.
> 
> This adds support the MT6370 ADC driver for system monitoring, including
> charger current, voltage, and temperature.
> 
> Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Andy Shevchenko July 15, 2022, 1:18 p.m. UTC | #2
On Fri, Jul 15, 2022 at 1:28 PM ChiaEn Wu <peterwu.pub@gmail.com> wrote:
>
> From: ChiaEn Wu <chiaen_wu@richtek.com>
>
> MediaTek MT6370 is a SubPMIC consisting of a single cell battery charger
> with ADC monitoring, RGB LEDs, dual channel flashlight, WLED backlight
> driver, display bias voltage supply, one general purpose LDO, and the
> USB Type-C & PD controller complies with the latest USB Type-C and PD
> standards.
>
> This adds support the MT6370 ADC driver for system monitoring, including

This adds --> Add a

> charger current, voltage, and temperature.

...

> +#include <linux/bits.h>
> +#include <linux/bitfield.h>
> +#include <linux/iio/iio.h>
> +#include <linux/kernel.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/sysfs.h>

...

> +#define MT6370_AICR_400MA              0x6
> +#define MT6370_ICHG_500MA              0x4
> +#define MT6370_ICHG_900MA              0x8

_mA ?

...

> +       ret = regmap_read_poll_timeout(priv->regmap,
> +                                      MT6370_REG_CHG_ADC, reg_val,
> +                                      !(reg_val & MT6370_ADC_START_MASK),
> +                                      ADC_CONV_POLLING_TIME_US,
> +                                      ADC_CONV_TIME_MS * 1000 * 3);

1000 --> MILLI ?

...

> +static int mt6370_adc_probe(struct platform_device *pdev)
> +{

Given comment in one place in the entire series would be good to use
in another where appropriate. For example, here it would also be nice
to have a temporary variable

  struct device *dev = &pdev->dev;

It will shorten some lines.

> +       struct mt6370_adc_data *priv;
> +       struct iio_dev *indio_dev;
> +       struct regmap *regmap;
> +       int ret;

> +}
diff mbox series

Patch

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 48ace74..60bcc28 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -737,6 +737,18 @@  config MEDIATEK_MT6360_ADC
 	  is used in smartphones and tablets and supports a 11 channel
 	  general purpose ADC.
 
+config MEDIATEK_MT6370_ADC
+	tristate "MediaTek MT6370 ADC driver"
+	depends on MFD_MT6370
+	help
+	  Say yes here to enable MediaTek MT6370 ADC support.
+
+	  This ADC driver provides 9 channels for system monitoring (charger
+	  current, voltage, and temperature).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "mt6370-adc".
+
 config MEDIATEK_MT6577_AUXADC
 	tristate "MediaTek AUXADC driver"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 39d806f..0ce285c 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -68,6 +68,7 @@  obj-$(CONFIG_MCP320X) += mcp320x.o
 obj-$(CONFIG_MCP3422) += mcp3422.o
 obj-$(CONFIG_MCP3911) += mcp3911.o
 obj-$(CONFIG_MEDIATEK_MT6360_ADC) += mt6360-adc.o
+obj-$(CONFIG_MEDIATEK_MT6370_ADC) += mt6370-adc.o
 obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o
 obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
 obj-$(CONFIG_MESON_SARADC) += meson_saradc.o
diff --git a/drivers/iio/adc/mt6370-adc.c b/drivers/iio/adc/mt6370-adc.c
new file mode 100644
index 0000000..51ef133
--- /dev/null
+++ b/drivers/iio/adc/mt6370-adc.c
@@ -0,0 +1,273 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Richtek Technology Corp.
+ *
+ * Author: ChiaEn Wu <chiaen_wu@richtek.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/sysfs.h>
+
+#include <dt-bindings/iio/adc/mediatek,mt6370_adc.h>
+
+#define MT6370_REG_CHG_CTRL3		0x113 /* AICR */
+#define MT6370_REG_CHG_CTRL7		0x117 /* ICHG */
+#define MT6370_REG_CHG_ADC		0x121
+#define MT6370_REG_ADC_DATA_H		0x14C
+
+#define MT6370_ADC_START_MASK		BIT(0)
+#define MT6370_ADC_IN_SEL_MASK		GENMASK(7, 4)
+#define MT6370_AICR_ICHG_MASK		GENMASK(7, 2)
+
+#define MT6370_AICR_400MA		0x6
+#define MT6370_ICHG_500MA		0x4
+#define MT6370_ICHG_900MA		0x8
+
+#define ADC_CONV_TIME_MS		35
+#define ADC_CONV_POLLING_TIME_US	1000
+
+struct mt6370_adc_data {
+	struct device *dev;
+	struct regmap *regmap;
+	/*
+	 * This mutex lock is for preventing the different ADC channels
+	 * from being read at the same time.
+	 */
+	struct mutex adc_lock;
+};
+
+static int mt6370_adc_read_channel(struct mt6370_adc_data *priv, int chan,
+				   unsigned long addr, int *val)
+{
+	unsigned int reg_val;
+	__be16 be_val;
+	int ret;
+
+	mutex_lock(&priv->adc_lock);
+
+	reg_val = MT6370_ADC_START_MASK |
+		  FIELD_PREP(MT6370_ADC_IN_SEL_MASK, addr);
+	ret = regmap_write(priv->regmap, MT6370_REG_CHG_ADC, reg_val);
+	if (ret)
+		goto adc_unlock;
+
+	msleep(ADC_CONV_TIME_MS);
+
+	ret = regmap_read_poll_timeout(priv->regmap,
+				       MT6370_REG_CHG_ADC, reg_val,
+				       !(reg_val & MT6370_ADC_START_MASK),
+				       ADC_CONV_POLLING_TIME_US,
+				       ADC_CONV_TIME_MS * 1000 * 3);
+	if (ret) {
+		dev_err(priv->dev, "Failed to read ADC register (%d)\n", ret);
+		goto adc_unlock;
+	}
+
+	ret = regmap_raw_read(priv->regmap, MT6370_REG_ADC_DATA_H,
+			      &be_val, sizeof(be_val));
+	if (ret)
+		goto adc_unlock;
+
+	*val = be16_to_cpu(be_val);
+	ret = IIO_VAL_INT;
+
+adc_unlock:
+	mutex_unlock(&priv->adc_lock);
+
+	return ret;
+}
+
+static int mt6370_adc_read_scale(struct mt6370_adc_data *priv,
+				 int chan, int *val1, int *val2)
+{
+	unsigned int reg_val;
+	int ret;
+
+	switch (chan) {
+	case MT6370_CHAN_VBAT:
+	case MT6370_CHAN_VSYS:
+	case MT6370_CHAN_CHG_VDDP:
+		*val1 = 5;
+		return IIO_VAL_INT;
+	case MT6370_CHAN_IBUS:
+		ret = regmap_read(priv->regmap, MT6370_REG_CHG_CTRL3, &reg_val);
+		if (ret)
+			return ret;
+
+		reg_val = FIELD_GET(MT6370_AICR_ICHG_MASK, reg_val);
+		if (reg_val < MT6370_AICR_400MA)
+			*val1 = 3350;
+		else
+			*val1 = 5000;
+
+		*val2 = 100;
+
+		return IIO_VAL_FRACTIONAL;
+	case MT6370_CHAN_IBAT:
+		ret = regmap_read(priv->regmap, MT6370_REG_CHG_CTRL7, &reg_val);
+		if (ret)
+			return ret;
+
+		reg_val = FIELD_GET(MT6370_AICR_ICHG_MASK, reg_val);
+		if (reg_val < MT6370_ICHG_500MA)
+			*val1 = 2375;
+		else if (reg_val >= MT6370_ICHG_500MA &&
+			 reg_val < MT6370_ICHG_900MA)
+			*val1 = 2680;
+		else
+			*val1 = 5000;
+
+		*val2 = 100;
+
+		return IIO_VAL_FRACTIONAL;
+	case MT6370_CHAN_VBUSDIV5:
+		*val1 = 25;
+		return IIO_VAL_INT;
+	case MT6370_CHAN_VBUSDIV2:
+		*val1 = 50;
+		return IIO_VAL_INT;
+	case MT6370_CHAN_TS_BAT:
+		*val1 = 25;
+		*val2 = 10000;
+		return IIO_VAL_FRACTIONAL;
+	case MT6370_CHAN_TEMP_JC:
+		*val1 = 2000;
+		return IIO_VAL_FRACTIONAL;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mt6370_adc_read_offset(struct mt6370_adc_data *priv,
+				  int chan, int *val)
+{
+	*val = -20;
+
+	return IIO_VAL_INT;
+}
+
+static int mt6370_adc_read_raw(struct iio_dev *iio_dev,
+			       const struct iio_chan_spec *chan,
+			       int *val, int *val2, long mask)
+{
+	struct mt6370_adc_data *priv = iio_priv(iio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		return mt6370_adc_read_channel(priv, chan->channel,
+					       chan->address, val);
+	case IIO_CHAN_INFO_SCALE:
+		return mt6370_adc_read_scale(priv, chan->channel, val, val2);
+	case IIO_CHAN_INFO_OFFSET:
+		return mt6370_adc_read_offset(priv, chan->channel, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static const char * const mt6370_channel_labels[MT6370_CHAN_MAX] = {
+	[MT6370_CHAN_VBUSDIV5] = "vbusdiv5",
+	[MT6370_CHAN_VBUSDIV2] = "vbusdiv2",
+	[MT6370_CHAN_VSYS] = "vsys",
+	[MT6370_CHAN_VBAT] = "vbat",
+	[MT6370_CHAN_TS_BAT] = "ts_bat",
+	[MT6370_CHAN_IBUS] = "ibus",
+	[MT6370_CHAN_IBAT] = "ibat",
+	[MT6370_CHAN_CHG_VDDP] = "chg_vddp",
+	[MT6370_CHAN_TEMP_JC] = "temp_jc",
+};
+
+static int mt6370_adc_read_label(struct iio_dev *iio_dev,
+				 struct iio_chan_spec const *chan, char *label)
+{
+	return sysfs_emit(label, "%s\n", mt6370_channel_labels[chan->channel]);
+}
+
+static const struct iio_info mt6370_adc_iio_info = {
+	.read_raw = mt6370_adc_read_raw,
+	.read_label = mt6370_adc_read_label,
+};
+
+#define MT6370_ADC_CHAN(_idx, _type, _addr, _extra_info) {	\
+	.type = _type,						\
+	.channel = MT6370_CHAN_##_idx,				\
+	.address = _addr,					\
+	.scan_index = MT6370_CHAN_##_idx,			\
+	.indexed = 1,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
+			      BIT(IIO_CHAN_INFO_SCALE) |	\
+			      _extra_info,			\
+}
+
+static const struct iio_chan_spec mt6370_adc_channels[] = {
+	MT6370_ADC_CHAN(VBUSDIV5, IIO_VOLTAGE, 1, 0),
+	MT6370_ADC_CHAN(VBUSDIV2, IIO_VOLTAGE, 2, 0),
+	MT6370_ADC_CHAN(VSYS, IIO_VOLTAGE, 3, 0),
+	MT6370_ADC_CHAN(VBAT, IIO_VOLTAGE, 4, 0),
+	MT6370_ADC_CHAN(TS_BAT, IIO_VOLTAGE, 6, 0),
+	MT6370_ADC_CHAN(IBUS, IIO_CURRENT, 8, 0),
+	MT6370_ADC_CHAN(IBAT, IIO_CURRENT, 9, 0),
+	MT6370_ADC_CHAN(CHG_VDDP, IIO_VOLTAGE, 11, 0),
+	MT6370_ADC_CHAN(TEMP_JC, IIO_TEMP, 12, BIT(IIO_CHAN_INFO_OFFSET)),
+};
+
+static int mt6370_adc_probe(struct platform_device *pdev)
+{
+	struct mt6370_adc_data *priv;
+	struct iio_dev *indio_dev;
+	struct regmap *regmap;
+	int ret;
+
+	regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!regmap)
+		return dev_err_probe(&pdev->dev, -ENODEV,
+				     "Failed to get regmap\n");
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	priv = iio_priv(indio_dev);
+	priv->dev = &pdev->dev;
+	priv->regmap = regmap;
+	mutex_init(&priv->adc_lock);
+
+	ret = regmap_write(priv->regmap, MT6370_REG_CHG_ADC, 0);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "Failed to reset ADC\n");
+
+	indio_dev->name = "mt6370-adc";
+	indio_dev->info = &mt6370_adc_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = mt6370_adc_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mt6370_adc_channels);
+
+	return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static const struct of_device_id mt6370_adc_of_id[] = {
+	{ .compatible = "mediatek,mt6370-adc", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mt6370_adc_of_id);
+
+static struct platform_driver mt6370_adc_driver = {
+	.driver = {
+		.name = "mt6370-adc",
+		.of_match_table = mt6370_adc_of_id,
+	},
+	.probe = mt6370_adc_probe,
+};
+module_platform_driver(mt6370_adc_driver);
+
+MODULE_AUTHOR("ChiaEn Wu <chiaen_wu@richtek.com>");
+MODULE_DESCRIPTION("MT6370 ADC Driver");
+MODULE_LICENSE("GPL v2");