From patchwork Tue Sep 6 08:29:33 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Corentin LABBE X-Patchwork-Id: 12967014 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 68426C38145 for ; Tue, 6 Sep 2022 08:30:51 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239245AbiIFIas (ORCPT ); Tue, 6 Sep 2022 04:30:48 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:55184 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239131AbiIFIaX (ORCPT ); Tue, 6 Sep 2022 04:30:23 -0400 Received: from mail-wr1-x433.google.com (mail-wr1-x433.google.com [IPv6:2a00:1450:4864:20::433]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 86B1B1EC5A for ; Tue, 6 Sep 2022 01:29:45 -0700 (PDT) Received: by mail-wr1-x433.google.com with SMTP id bj14so1002732wrb.12 for ; Tue, 06 Sep 2022 01:29:45 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20210112.gappssmtp.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date; bh=tOJ5RONUzFFdYyOPupgzMstaEdJzzQOp7G4l2I64vM4=; b=GSXy6w5uPJHlM0bDcxH3xsdbrHTETLqtpKHK5yoY4kqv3lRs7KhTs6ASJqNe9rD2kp T7WnhAbjU7SU9XxvfBAg5nuC7l0zksB6M5KLcE8HuKjdsXYtXZUPU/F0VaBFDsE+GKzA TgpibK84mnU9jls0CG0Mxy2S9o18Zl9t2mzBxTWDijYwSvNNrC6bWJEI2t1ZprNHJjBV FUp6nNE6/CAgJIog8SiMXFF/MIGuoXdcB/RZ7eOztzeyc/nu8wO4a0sDm6CgWi3d//77 Nv2sG/XqM9w7fK+iGVVSHcx8VJcrRUd+/Mvb7/m6CmePrHm0BSBCod6hQSNcAtEprI2g ITaA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date; bh=tOJ5RONUzFFdYyOPupgzMstaEdJzzQOp7G4l2I64vM4=; b=1h51sIBTwAQ7mA6CodF2UAALNMaF3RwmDxSXnvy+axjFqUvfWMknGvpLHIS67lBhmE 1VdPAewymM5hofvr/dPGUbxLgHS9ecAMIZYNPELbtvl+hK4Gn/OxsuK/DaYpxYENgYnZ a/rqCFTExz1K/yg342kvHkw09qOdmyS0mtcJIDnXjYhFrZstYfozkDpXBR1Yr2kVzzwo W3sXj8CVtwA7AspQEjF82OobgeKRr0i9s6JY9kIxVPlbRG8SVvaZc8RYfEuZxJSRF7rC A1dIVkQZJYdW1aV/7X7gHLM50X1A+992oubzfSr4LdqNd6LZcYLCQj3+yu5reuSxuFWq GwVg== X-Gm-Message-State: ACgBeo35P5urjaEH5ji+fkEyxASbrTzhFgoeHrYobyxQMsvuyd1+XUoW sVf0w7pdJG7eyLDIK5wkMOvCwQ== X-Google-Smtp-Source: AA6agR63zm+fO0ucK4ghn/HU6jQv0GKpQ+Ch0twxbxZ31q53OlkVG1KCey5x1zD6YAAX9Z2BgQRh+Q== X-Received: by 2002:a5d:5b17:0:b0:226:da70:619e with SMTP id bx23-20020a5d5b17000000b00226da70619emr23696509wrb.434.1662452983620; Tue, 06 Sep 2022 01:29:43 -0700 (PDT) Received: from localhost.localdomain (laubervilliers-658-1-213-31.w90-63.abo.wanadoo.fr. [90.63.244.31]) by smtp.googlemail.com with ESMTPSA id q10-20020adff78a000000b0021e6277bc50sm13752248wrp.36.2022.09.06.01.29.42 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 06 Sep 2022 01:29:43 -0700 (PDT) From: Corentin Labbe To: gregkh@linuxfoundation.org, johan@kernel.org Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, neil.armstrong@linaro.org, Corentin Labbe Subject: [PATCH 1/2] usb: serial: add support for CH348 Date: Tue, 6 Sep 2022 08:29:33 +0000 Message-Id: <20220906082934.2046584-2-clabbe@baylibre.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220906082934.2046584-1-clabbe@baylibre.com> References: <20220906082934.2046584-1-clabbe@baylibre.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org The CH348 is an USB octo port serial adapter. This patch adds support for it. Signed-off-by: Corentin Labbe --- drivers/usb/serial/Kconfig | 9 + drivers/usb/serial/Makefile | 1 + drivers/usb/serial/ch348.c | 709 ++++++++++++++++++++++++++++++++++++ 3 files changed, 719 insertions(+) create mode 100644 drivers/usb/serial/ch348.c diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index ef8d1c73c754..1e1842656b54 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -112,6 +112,15 @@ config USB_SERIAL_CH341 To compile this driver as a module, choose M here: the module will be called ch341. +config USB_SERIAL_CH348 + tristate "USB Winchiphead CH348 Octo Port Serial Driver" + help + Say Y here if you want to use a Winchiphead CH348 octo port + USB to serial adapter. + + To compile this driver as a module, choose M here: the + module will be called ch348. + config USB_SERIAL_WHITEHEAT tristate "USB ConnectTech WhiteHEAT Serial Driver" select USB_EZUSB_FX2 diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index c7bb1a88173e..d16ff59fde68 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_USB_SERIAL_AIRCABLE) += aircable.o obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_CH341) += ch341.o +obj-$(CONFIG_USB_SERIAL_CH348) += ch348.o obj-$(CONFIG_USB_SERIAL_CP210X) += cp210x.o obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o obj-$(CONFIG_USB_SERIAL_CYPRESS_M8) += cypress_m8.o diff --git a/drivers/usb/serial/ch348.c b/drivers/usb/serial/ch348.c new file mode 100644 index 000000000000..80ecdee2a885 --- /dev/null +++ b/drivers/usb/serial/ch348.c @@ -0,0 +1,709 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB serial driver for USB to Octal UARTs chip ch348. + * + * Copyright (C) 2022 Corentin Labbe + * With the help of Neil Armstrong + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DEFAULT_BAUD_RATE 9600 +#define DEFAULT_TIMEOUT 2000 + +#define CH348_CTO_D 0x01 +#define CH348_CTO_R 0x02 + +#define CH348_CTI_C 0x10 +#define CH348_CTI_DSR 0x20 +#define CH348_CTI_R 0x40 +#define CH348_CTI_DCD 0x80 + +#define CH348_LO 0x02 +#define CH348_LP 0x04 +#define CH348_LF 0x08 +#define CH348_LB 0x10 + +#define CMD_W_R 0xC0 +#define CMD_W_BR 0x80 + +#define CMD_WB_E 0x90 +#define CMD_RB_E 0xC0 + +#define M_NOR 0x00 +#define M_HF 0x03 + +#define R_MOD 0x97 +#define R_IO_D 0x98 +#define R_IO_O 0x99 +#define R_IO_I 0x9b +#define R_TM_O 0x9c +#define R_INIT 0xa1 + +#define R_C1 0x01 +#define R_C2 0x02 +#define R_C4 0x04 +#define R_C5 0x06 + +#define R_II_B1 0x06 +#define R_II_B2 0x02 +#define R_II_B3 0x00 + +#define CH348_RX_PORTNUM_OFF 0 +#define CH348_RX_LENGTH_OFF 1 +#define CH348_RX_DATA_OFF 2 + +#define CH348_RX_PORT_CHUNK_LENGTH 32 +#define CH348_RX_PORT_MAX_LENGTH 30 + +#define CH348_TX_PORTNUM_OFF 0 +#define CH348_TX_LENGTH0_OFF 1 +#define CH348_TX_LENGTH1_OFF 2 +#define CH348_TX_DATA_OFF 3 + +#define CH348_INIT_BUFLEN 12 + +#define CH348_MAXPORT 8 + +/* + * The CH348 multiplexes rx & tx into a pair of Bulk USB endpoints for + * the 8 serial ports, and another pair of Bulk USB endpoints to + * set port settings and receive port status events. + * + * The USB serial cores ties every Bulk endpoints pairs to each ports, + * but in our case it will set port 0 with the rx/tx endpoints + * and port 1 with the setup/status endpoints. + * + * To still take advantage of the generic code, we (re-)initialize + * the USB serial port structure with the correct USB endpoint + * for read and write, and write proper process_read_urb() + * and prepare_write_buffer() to correctly (de-)multiplex data. + */ + +/* struct ch348_ttyport - per-port information + * @uartmode UART port current mode + * @port: USB Serial Port structure + * @io_status: last reported I/O state + * @modem_status: last reported modem signals state + */ +struct ch348_ttyport { + u8 uartmode; + struct usb_serial_port *port; + unsigned int io_status; + unsigned int modem_status; +}; + +/* struct ch348 - main container for all this driver information + * @udev: pointer to the CH348 usb device + * @ttyport: List of per-port information + * @rx_endpoint: endpoint number for read operations + * @statusrx_endpoint: endpoint number for status operations + * @cmdtx_endpoint: endpoint number for configure operations + * @status_read_urb: URB for status + * @status_read_buffer: buffer used by status_read_urb + * @status_lock: control access of io_status/modem_status + * @readsize: packet size for bulk_in + * @writesize: packet size for bulk_out + */ +struct ch348 { + struct usb_device *udev; + struct ch348_ttyport ttyport[CH348_MAXPORT]; + + int rx_endpoint; + int tx_endpoint; + int statusrx_endpoint; + int cmdtx_endpoint; + + struct urb *status_read_urb; + u8 *status_read_buffer; + + spinlock_t status_lock; + int readsize; + int writesize; +}; + +/* Some values came from vendor tree, and we have no meaning for them, this + * function simply use them. + */ +static int ch348_do_magic(struct ch348 *ch348, int portnum, u8 action, u8 reg, u8 control) +{ + int ret = 0, len; + u8 *buffer; + + buffer = kzalloc(3, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + if (portnum < 4) + reg += 0x10 * portnum; + else + reg += 0x10 * (portnum - 4) + 0x08; + + buffer[0] = action; + buffer[1] = reg; + buffer[2] = control; + + ret = usb_bulk_msg(ch348->udev, ch348->cmdtx_endpoint, buffer, 3, &len, + DEFAULT_TIMEOUT); + if (ret) + dev_err(&ch348->udev->dev, "%s usb_bulk_msg err=%d\n", __func__, ret); + + kfree(buffer); + return ret; +} + +static int ch348_configure(struct ch348 *ch348, int portnum) +{ + int ret; + + ret = ch348_do_magic(ch348, portnum, CMD_W_R, R_C2, 0x87); + if (ret) + return ret; + ret = ch348_do_magic(ch348, portnum, CMD_W_R, R_C4, 0x08); + return ret; +} + +static void ch348_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct ch348 *ch348 = usb_get_serial_data(port->serial); + u8 *buffer = urb->transfer_buffer, *end; + unsigned int portnum, usblen; + + if (!urb->actual_length) { + dev_warn(&port->dev, "%s:%d empty rx buffer\n", __func__, __LINE__); + return; + } + + end = buffer + urb->actual_length; + + for (; buffer < end; buffer += CH348_RX_PORT_CHUNK_LENGTH) { + portnum = buffer[CH348_RX_PORTNUM_OFF]; + if (portnum >= CH348_MAXPORT) { + dev_warn(&port->dev, "%s:%d invalid port %d\n", + __func__, __LINE__, portnum); + break; + } + + usblen = buffer[CH348_RX_LENGTH_OFF]; + if (usblen > 30) { + dev_warn(&port->dev, "%s:%d invalid length %d for port %d\n", + __func__, __LINE__, usblen, portnum); + break; + } + + port = ch348->ttyport[portnum].port; + tty_insert_flip_string(&port->port, &buffer[CH348_RX_DATA_OFF], usblen); + tty_flip_buffer_push(&port->port); + port->icount.rx += usblen; + usb_serial_debug_data(&port->dev, __func__, usblen, &buffer[CH348_RX_DATA_OFF]); + } +} + +static int ch348_prepare_write_buffer(struct usb_serial_port *port, void *dest, size_t size) +{ + u8 *buf = dest; + int count; + + count = kfifo_out_locked(&port->write_fifo, buf + CH348_TX_DATA_OFF, + size - CH348_TX_DATA_OFF, + &port->lock); + + buf[CH348_TX_PORTNUM_OFF] = port->port_number; + buf[CH348_TX_LENGTH0_OFF] = count; + buf[CH348_TX_LENGTH1_OFF] = count >> 8; + + return count + CH348_TX_DATA_OFF; +} + +static int ch348_set_uartmode(struct ch348 *ch348, int portnum, u8 index, u8 mode) +{ + int ret = 0; + + if (ch348->ttyport[portnum].uartmode == M_NOR && mode == M_HF) { + ret = ch348_do_magic(ch348, portnum, CMD_W_BR, R_C4, 0x51); + if (ret) + return ret; + ch348->ttyport[portnum].uartmode = M_HF; + } + + if (ch348->ttyport[portnum].uartmode == M_HF && mode == M_NOR) { + ret = ch348_do_magic(ch348, portnum, CMD_W_BR, R_C4, 0x50); + if (ret) + return ret; + ch348->ttyport[portnum].uartmode = M_NOR; + } + return 0; +} + +static void ch348_set_termios(struct tty_struct *tty, struct usb_serial_port *port, + const struct ktermios *termios_old) +{ + struct ch348 *ch348 = usb_get_serial_data(port->serial); + int portnum = port->port_number; + struct ktermios *termios = &tty->termios; + int ret, sent; + char *buffer; + __le32 dwDTERate; + u8 bCharFormat; + u8 bParityType; + u8 bDataBits; + + if (termios_old && !tty_termios_hw_change(&tty->termios, termios_old)) + return; + + buffer = kzalloc(CH348_INIT_BUFLEN, GFP_KERNEL); + if (!buffer) { + if (termios_old) + tty->termios = *termios_old; + return; + } + + dwDTERate = tty_get_baud_rate(tty); + /* test show no success on low baud */ + if (dwDTERate < 1200) + dwDTERate = DEFAULT_BAUD_RATE; + + bCharFormat = termios->c_cflag & CSTOPB ? 2 : 1; + + bParityType = termios->c_cflag & PARENB ? + (termios->c_cflag & PARODD ? 1 : 2) + + (termios->c_cflag & CMSPAR ? 2 : 0) : 0; + + switch (termios->c_cflag & CSIZE) { + case CS5: + bDataBits = 5; + break; + case CS6: + bDataBits = 6; + break; + case CS7: + bDataBits = 7; + break; + case CS8: + default: + bDataBits = 8; + break; + } + + buffer[0] = CMD_WB_E | (portnum & 0x0F); + buffer[1] = R_INIT; + buffer[2] = portnum; + buffer[3] = dwDTERate >> 24; + buffer[4] = dwDTERate >> 16; + buffer[5] = dwDTERate >> 8; + buffer[6] = dwDTERate; + if (bCharFormat == 2) + buffer[7] = 0x02; + else if (bCharFormat == 1) + buffer[7] = 0x00; + buffer[8] = bParityType; + buffer[9] = bDataBits; + buffer[10] = max_t(__le32, 5, DIV_ROUND_CLOSEST(10000 * 15, dwDTERate)); + buffer[11] = 0; + ret = usb_bulk_msg(ch348->udev, ch348->cmdtx_endpoint, buffer, + CH348_INIT_BUFLEN, &sent, DEFAULT_TIMEOUT); + if (ret < 0) { + dev_err(&ch348->udev->dev, "%s usb_bulk_msg err=%d\n", + __func__, ret); + goto out; + } + + ret = ch348_do_magic(ch348, portnum, CMD_W_R, R_C1, 0x0F); + if (ret < 0) + goto out; + + if (C_CRTSCTS(tty)) + ret = ch348_set_uartmode(ch348, portnum, portnum, M_HF); + else + ret = ch348_set_uartmode(ch348, portnum, portnum, M_NOR); + +out: + kfree(buffer); +} + +static int ch348_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct ch348 *ch348 = usb_get_serial_data(port->serial); + int rv; + + if (tty) + ch348_set_termios(tty, port, NULL); + + rv = ch348_configure(ch348, port->port_number); + if (rv) + pr_err("%s configure err\n", __func__); + + rv = usb_serial_generic_open(tty, port); + + return rv; +} + +static int ch348_fixup_port_bulk_in(struct ch348 *ch348, struct usb_serial_port *port) +{ + int i; + + /* Already Initialized */ + if (port->bulk_in_size) { + port->bulk_in_endpointAddress = usb_pipeendpoint(ch348->rx_endpoint); + + for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) + usb_fill_bulk_urb(port->read_urbs[i], port->serial->dev, + ch348->rx_endpoint, + port->bulk_in_buffers[i], port->bulk_in_size, + usb_serial_generic_read_bulk_callback, port); + } else { + port->bulk_in_size = ch348->readsize; + port->bulk_in_endpointAddress = usb_pipeendpoint(ch348->rx_endpoint); + + for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) { + set_bit(i, &port->read_urbs_free); + port->read_urbs[i] = usb_alloc_urb(0, GFP_KERNEL); + if (!port->read_urbs[i]) + return -ENOMEM; + port->bulk_in_buffers[i] = kmalloc(port->bulk_in_size, GFP_KERNEL); + if (!port->bulk_in_buffers[i]) + return -ENOMEM; + usb_fill_bulk_urb(port->read_urbs[i], port->serial->dev, + ch348->rx_endpoint, + port->bulk_in_buffers[i], port->bulk_in_size, + usb_serial_generic_read_bulk_callback, port); + } + + port->read_urb = port->read_urbs[0]; + port->bulk_in_buffer = port->bulk_in_buffers[0]; + } + + return 0; +} + +static int ch348_fixup_port_bulk_out(struct ch348 *ch348, struct usb_serial_port *port) +{ + int i; + + /* Already Initialized */ + if (port->bulk_out_size) { + port->bulk_out_endpointAddress = usb_pipeendpoint(ch348->tx_endpoint); + + for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) + usb_fill_bulk_urb(port->write_urbs[i], port->serial->dev, + ch348->tx_endpoint, + port->bulk_out_buffers[i], port->bulk_out_size, + usb_serial_generic_write_bulk_callback, port); + } else { + if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL)) + return -ENOMEM; + + port->bulk_out_size = ch348->writesize; + port->bulk_out_endpointAddress = usb_pipeendpoint(ch348->tx_endpoint); + + for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) { + set_bit(i, &port->write_urbs_free); + port->write_urbs[i] = usb_alloc_urb(0, GFP_KERNEL); + if (!port->write_urbs[i]) + return -ENOMEM; + port->bulk_out_buffers[i] = kmalloc(port->bulk_out_size, GFP_KERNEL); + if (!port->bulk_out_buffers[i]) + return -ENOMEM; + usb_fill_bulk_urb(port->write_urbs[i], port->serial->dev, + ch348->tx_endpoint, + port->bulk_out_buffers[i], port->bulk_out_size, + usb_serial_generic_write_bulk_callback, port); + } + + port->write_urb = port->write_urbs[0]; + port->bulk_out_buffer = port->bulk_out_buffers[0]; + } + + return 0; +} + +static int ch348_attach(struct usb_serial *serial) +{ + struct ch348 *ch348 = usb_get_serial_data(serial); + int i, ret; + + /* Fixup Bulk OUT and IN endpoints */ + for (i = 0; i < serial->num_port_pointers; ++i) { + ret = ch348_fixup_port_bulk_out(ch348, serial->port[i]); + if (ret) + return ret; + ret = ch348_fixup_port_bulk_in(ch348, serial->port[i]); + if (ret) + return ret; + } + + return usb_submit_urb(ch348->status_read_urb, GFP_KERNEL); +} + +static void ch348_update_io_status(struct ch348 *ch348, unsigned int portnum, u8 data) +{ + u8 diff; + + if (portnum >= CH348_MAXPORT) + return; + + data &= (CH348_LO | CH348_LP | CH348_LF | CH348_LB); + + spin_lock(&ch348->status_lock); + diff = data ^ ch348->ttyport[portnum].io_status; + ch348->ttyport[portnum].io_status = data; + spin_unlock(&ch348->status_lock); + + if (!diff) + return; + + if (diff & CH348_LO) + ch348->ttyport[portnum].port->icount.overrun++; + if (diff & CH348_LP) + ch348->ttyport[portnum].port->icount.parity++; + if (diff & CH348_LF) + ch348->ttyport[portnum].port->icount.frame++; + if (diff & CH348_LB) + ch348->ttyport[portnum].port->icount.brk++; + + wake_up_interruptible(&ch348->ttyport[portnum].port->port.delta_msr_wait); +} + +static void ch348_update_modem_status(struct ch348 *ch348, unsigned int portnum, u8 data) +{ + struct tty_struct *tty; + u8 diff; + + if (portnum >= CH348_MAXPORT) + return; + + data &= (CH348_CTI_C | CH348_CTI_DSR | CH348_CTI_R | CH348_CTI_DCD); + + spin_lock(&ch348->status_lock); + diff = data ^ ch348->ttyport[portnum].modem_status; + ch348->ttyport[portnum].modem_status = data; + spin_unlock(&ch348->status_lock); + + if (!diff) + return; + + if (diff & CH348_CTI_C) + ch348->ttyport[portnum].port->icount.cts++; + if (diff & CH348_CTI_DSR) + ch348->ttyport[portnum].port->icount.dsr++; + if (diff & CH348_CTI_R) + ch348->ttyport[portnum].port->icount.rng++; + if (diff & CH348_CTI_DCD) { + ch348->ttyport[portnum].port->icount.dcd++; + + tty = tty_port_tty_get(&ch348->ttyport[portnum].port->port); + if (tty) { + usb_serial_handle_dcd_change(ch348->ttyport[portnum].port, tty, + data & CH348_CTI_DCD); + tty_kref_put(tty); + } + } + + wake_up_interruptible(&ch348->ttyport[portnum].port->port.delta_msr_wait); +} + +static void ch348_update_status(struct ch348 *ch348, u8 *data, unsigned int len) +{ + u8 *end = data + len; + unsigned int portnum, reg; + + for (; data < end; ) { + portnum = data[0] & 0xf; + reg = data[1]; + + if (reg == R_INIT) { + data += CH348_INIT_BUFLEN; + continue; + } + + if (reg >= R_MOD && reg <= R_IO_I) { + /* This signal is used by vendor driver to handle GPIO Interrupts */ + dev_dbg(&ch348->udev->dev, "port%d: unhandled status %02x%02x\n", + portnum, data[2], data[3]); + data += 4; + continue; + } + + if ((reg & 0xf) == R_II_B1) { + dev_dbg(&ch348->udev->dev, "port%d: uart io state %02x\n", + portnum, data[2]); + ch348_update_io_status(ch348, portnum, data[2]); + data += 3; + continue; + } + + if ((reg & 0xf) == R_II_B2) { + /* This signal is used by vendor driver to aggregate multiple port TX */ + dev_dbg(&ch348->udev->dev, + "port%d: unhandled Write Empty status\n", portnum); + data += 3; + continue; + } + + if ((reg & 0xf) == R_II_B3) { + dev_dbg(&ch348->udev->dev, "port%d: modem status %02x\n", portnum, data[2]); + ch348_update_modem_status(ch348, portnum, data[2]); + data += 3; + continue; + } + + dev_dbg(&ch348->udev->dev, "port%d: unknown status %02x\n", portnum, reg); + data += 3; + } +} + +static void ch348_status_read_bulk_callback(struct urb *urb) +{ + struct ch348 *ch348 = urb->context; + u8 *data = urb->transfer_buffer; + unsigned int len = urb->actual_length; + int ret; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&ch348->udev->dev, "%s - urb shutting down: %d\n", + __func__, urb->status); + return; + default: + dev_dbg(&ch348->udev->dev, "%s - nonzero urb status: %d\n", + __func__, urb->status); + goto exit; + } + + usb_serial_debug_data(&ch348->udev->dev, __func__, len, data); + ch348_update_status(ch348, data, len); + +exit: + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret && urb->status == 0) { + dev_err(&ch348->udev->dev, "%s - usb_submit_urb failed: %d\n", + __func__, ret); + } +} + +static int ch348_allocate_status_read(struct ch348 *ch348, struct usb_endpoint_descriptor *epd) +{ + int buffer_size = usb_endpoint_maxp(epd); + + ch348->status_read_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!ch348->status_read_urb) + return -ENOMEM; + ch348->status_read_buffer = kmalloc(buffer_size, GFP_KERNEL); + if (!ch348->status_read_buffer) + return -ENOMEM; + + usb_fill_bulk_urb(ch348->status_read_urb, ch348->udev, + ch348->statusrx_endpoint, ch348->status_read_buffer, + buffer_size, ch348_status_read_bulk_callback, ch348); + + return 0; +} + +static void ch348_release(struct usb_serial *serial) +{ + struct ch348 *ch348 = usb_get_serial_data(serial); + + usb_kill_urb(ch348->status_read_urb); + usb_free_urb(ch348->status_read_urb); +} + +static int ch348_probe(struct usb_serial *serial, const struct usb_device_id *id) +{ + struct usb_interface *data_interface; + struct usb_endpoint_descriptor *epcmdwrite = NULL; + struct usb_endpoint_descriptor *epstatusread = NULL; + struct usb_endpoint_descriptor *epread = NULL; + struct usb_endpoint_descriptor *epwrite = NULL; + struct usb_device *usb_dev = serial->dev; + struct ch348 *ch348; + int ret; + + data_interface = usb_ifnum_to_if(usb_dev, 0); + + epread = &data_interface->cur_altsetting->endpoint[0].desc; + epwrite = &data_interface->cur_altsetting->endpoint[1].desc; + epstatusread = &data_interface->cur_altsetting->endpoint[2].desc; + epcmdwrite = &data_interface->cur_altsetting->endpoint[3].desc; + + ch348 = devm_kzalloc(&serial->dev->dev, sizeof(*ch348), GFP_KERNEL); + if (!ch348) + return -ENOMEM; + + usb_set_serial_data(serial, ch348); + + ch348->readsize = usb_endpoint_maxp(epread); + ch348->writesize = usb_endpoint_maxp(epwrite); + ch348->udev = serial->dev; + + spin_lock_init(&ch348->status_lock); + + ch348->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress); + ch348->tx_endpoint = usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress); + ch348->cmdtx_endpoint = usb_sndbulkpipe(usb_dev, epcmdwrite->bEndpointAddress); + ch348->statusrx_endpoint = usb_rcvbulkpipe(usb_dev, epstatusread->bEndpointAddress); + + ret = ch348_allocate_status_read(ch348, epstatusread); + if (ret) + return ret; + return 0; +} + +static int ch348_port_probe(struct usb_serial_port *port) +{ + struct ch348 *ch348 = usb_get_serial_data(port->serial); + + ch348->ttyport[port->port_number].port = port; + + return 0; +} + +static const struct usb_device_id ch348_ids[] = { + { USB_DEVICE(0x1a86, 0x55d9), }, + { } +}; + +MODULE_DEVICE_TABLE(usb, ch348_ids); + +static struct usb_serial_driver ch348_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ch348", + }, + .id_table = ch348_ids, + .num_ports = CH348_MAXPORT, + .open = ch348_open, + .set_termios = ch348_set_termios, + .process_read_urb = ch348_process_read_urb, + .prepare_write_buffer = ch348_prepare_write_buffer, + .probe = ch348_probe, + .attach = ch348_attach, + .release = ch348_release, + .port_probe = ch348_port_probe, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &ch348_device, NULL +}; + +module_usb_serial_driver(serial_drivers, ch348_ids); + +MODULE_AUTHOR("Corentin Labbe "); +MODULE_DESCRIPTION("USB CH348 Octo port serial converter driver"); +MODULE_LICENSE("GPL");