From patchwork Mon Oct 31 11:13:57 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andre Przywara X-Patchwork-Id: 13025604 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 4176AFA3746 for ; Mon, 31 Oct 2022 11:14:42 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230416AbiJaLOl (ORCPT ); Mon, 31 Oct 2022 07:14:41 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56826 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230429AbiJaLOi (ORCPT ); Mon, 31 Oct 2022 07:14:38 -0400 Received: from foss.arm.com (foss.arm.com [217.140.110.172]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 36BA3E08E; Mon, 31 Oct 2022 04:14:38 -0700 (PDT) Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id 4A77823A; Mon, 31 Oct 2022 04:14:44 -0700 (PDT) Received: from donnerap.arm.com (donnerap.cambridge.arm.com [10.1.197.42]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id 5D25F3F703; Mon, 31 Oct 2022 04:14:35 -0700 (PDT) From: Andre Przywara To: Jernej Skrabec , Samuel Holland , Chen-Yu Tsai , Kishon Vijay Abraham I , Vinod Koul Cc: Rob Herring , Krzysztof Kozlowski , Greg Kroah-Hartman , linux-phy@lists.infradead.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, Karl Kurbjun , Icenowy Zheng Subject: [PATCH v2 6/7] arm64: dts: allwinner: h616: OrangePi Zero 2: Add USB nodes Date: Mon, 31 Oct 2022 11:13:57 +0000 Message-Id: <20221031111358.3387297-7-andre.przywara@arm.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221031111358.3387297-1-andre.przywara@arm.com> References: <20221031111358.3387297-1-andre.przywara@arm.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org The OrangePi Zero 2 has one USB-A host port, VBUS is provided by a GPIO controlled regulator. The USB-C port is meant to power the board, but is also connected to the USB 0 port, which we configure as an MUSB peripheral. Signed-off-by: Andre Przywara Reviewed-by: Jernej Skrabec --- .../allwinner/sun50i-h616-orangepi-zero2.dts | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts index 02893f3ac99d4..cb8600d0ea1ef 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts @@ -49,8 +49,24 @@ reg_vcc5v: vcc5v { regulator-max-microvolt = <5000000>; regulator-always-on; }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_vcc5v>; + enable-active-high; + gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */ + }; }; +&ehci1 { + status = "okay"; +}; + +/* USB 2 & 3 are on headers only. */ + &emac0 { pinctrl-names = "default"; pinctrl-0 = <&ext_rgmii_pins>; @@ -76,6 +92,10 @@ &mmc0 { status = "okay"; }; +&ohci1 { + status = "okay"; +}; + &r_rsb { status = "okay"; @@ -211,3 +231,24 @@ &uart0 { pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; + +&usbotg { + /* + * PHY0 pins are connected to a USB-C socket, but a role switch + * is not implemented: both CC pins are pulled to GND. + * The VBUS pins power the device, so a fixed peripheral mode + * is the best choice. + * The board can be powered via GPIOs, in this case port0 *can* + * act as a host (with a cable/adapter ignoring CC), as VBUS is + * then provided by the GPIOs. Any user of this setup would + * need to adjust the DT accordingly: dr_mode set to "host", + * enabling OHCI0 and EHCI0. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +};