diff mbox series

[v2] thunderbolt: Add wake on connect/disconnect on USB4 ports

Message ID 20221101115042.248187-1-rajat.khandelwal@intel.com (mailing list archive)
State Accepted
Commit a5cfc9d65879c0d377f732531a2e80ee3a9eebbc
Headers show
Series [v2] thunderbolt: Add wake on connect/disconnect on USB4 ports | expand

Commit Message

Rajat Khandelwal Nov. 1, 2022, 11:50 a.m. UTC 
Wake on connect/disconnect is only supported while runtime suspend
for now, which is obviously necessary. It is also not inherently
desired for the system to wakeup on thunderbolt/USB4 hot plug events.
However, we can still make user in control of waking up the system
in the events of hot plug/unplug.
This patch adds 'wakeup' attribute under 'usb4_portX/power' sysfs
attribute and only enables wakes on connect/disconnect to the
respective port when 'wakeup' is set to 'enabled'. The attribute
is set to 'disabled' by default.

Signed-off-by: Rajat Khandelwal <rajat.khandelwal@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---

Significant changes and reasons:
1. 'if (!port->cap_usb4)' is added under the loop in
'usb4_switch_check_wakes' function since the checks later are
explicitly targeted to the USB4 port configuration capability.
'if (!tb_port_has_remote(port))' is removed because events now can
be connection/disconnection along with USB4 events. Thus, a wake
on connection can be triggered by user on the USB4 port (initially
no remote).
2. Verified runtime wakeup. It works absolutely fine.
3. Wakeup count has to be increased in the 'wakeup_count' attribute
under usb4_port/power, thus requiring another pm_wakeup_event.

v2: Fixed version naming along with some minor grammatical fixes.

 drivers/thunderbolt/tb_regs.h   |  2 ++
 drivers/thunderbolt/usb4.c      | 33 +++++++++++++++++++++++++--------
 drivers/thunderbolt/usb4_port.c |  3 +++
 3 files changed, 30 insertions(+), 8 deletions(-)

Comments

Mika Westerberg Nov. 7, 2022, 12:41 p.m. UTC | #1 
On Tue, Nov 01, 2022 at 05:20:42PM +0530, Rajat Khandelwal wrote:
> Wake on connect/disconnect is only supported while runtime suspend
> for now, which is obviously necessary. It is also not inherently
> desired for the system to wakeup on thunderbolt/USB4 hot plug events.
> However, we can still make user in control of waking up the system
> in the events of hot plug/unplug.
> This patch adds 'wakeup' attribute under 'usb4_portX/power' sysfs
> attribute and only enables wakes on connect/disconnect to the
> respective port when 'wakeup' is set to 'enabled'. The attribute
> is set to 'disabled' by default.
> 
> Signed-off-by: Rajat Khandelwal <rajat.khandelwal@intel.com>
> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Applied to thunderbolt.git/next, thanks!
diff mbox series

Patch

diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h
index 166054110388..04733fc1130c 100644
--- a/drivers/thunderbolt/tb_regs.h
+++ b/drivers/thunderbolt/tb_regs.h
@@ -358,6 +358,8 @@  struct tb_regs_port_header {
 #define PORT_CS_18_BE				BIT(8)
 #define PORT_CS_18_TCM				BIT(9)
 #define PORT_CS_18_CPS				BIT(10)
+#define PORT_CS_18_WOCS				BIT(16)
+#define PORT_CS_18_WODS				BIT(17)
 #define PORT_CS_18_WOU4S			BIT(18)
 #define PORT_CS_19				0x13
 #define PORT_CS_19_PC				BIT(3)
diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c
index 3a2e7126db9d..0d5ff086814b 100644
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -155,6 +155,8 @@  static inline int usb4_switch_op_data(struct tb_switch *sw, u16 opcode,
 
 static void usb4_switch_check_wakes(struct tb_switch *sw)
 {
+	bool wakeup_usb4 = false;
+	struct usb4_port *usb4;
 	struct tb_port *port;
 	bool wakeup = false;
 	u32 val;
@@ -173,20 +175,31 @@  static void usb4_switch_check_wakes(struct tb_switch *sw)
 		wakeup = val & (ROUTER_CS_6_WOPS | ROUTER_CS_6_WOUS);
 	}
 
-	/* Check for any connected downstream ports for USB4 wake */
+	/*
+	 * Check for any downstream ports for USB4 wake,
+	 * connection wake and disconnection wake.
+	 */
 	tb_switch_for_each_port(sw, port) {
-		if (!tb_port_has_remote(port))
+		if (!port->cap_usb4)
 			continue;
 
 		if (tb_port_read(port, &val, TB_CFG_PORT,
 				 port->cap_usb4 + PORT_CS_18, 1))
 			break;
 
-		tb_port_dbg(port, "USB4 wake: %s\n",
-			    (val & PORT_CS_18_WOU4S) ? "yes" : "no");
+		tb_port_dbg(port, "USB4 wake: %s, connection wake: %s, disconnection wake: %s\n",
+			    (val & PORT_CS_18_WOU4S) ? "yes" : "no",
+			    (val & PORT_CS_18_WOCS) ? "yes" : "no",
+			    (val & PORT_CS_18_WODS) ? "yes" : "no");
+
+		wakeup_usb4 = val & (PORT_CS_18_WOU4S | PORT_CS_18_WOCS |
+				     PORT_CS_18_WODS);
+
+		usb4 = port->usb4;
+		if (device_may_wakeup(&usb4->dev) && wakeup_usb4)
+			pm_wakeup_event(&usb4->dev, 0);
 
-		if (val & PORT_CS_18_WOU4S)
-			wakeup = true;
+		wakeup |= wakeup_usb4;
 	}
 
 	if (wakeup)
@@ -366,6 +379,7 @@  bool usb4_switch_lane_bonding_possible(struct tb_switch *sw)
  */
 int usb4_switch_set_wake(struct tb_switch *sw, unsigned int flags)
 {
+	struct usb4_port *usb4;
 	struct tb_port *port;
 	u64 route = tb_route(sw);
 	u32 val;
@@ -395,10 +409,13 @@  int usb4_switch_set_wake(struct tb_switch *sw, unsigned int flags)
 			val |= PORT_CS_19_WOU4;
 		} else {
 			bool configured = val & PORT_CS_19_PC;
+			usb4 = port->usb4;
 
-			if ((flags & TB_WAKE_ON_CONNECT) && !configured)
+			if (((flags & TB_WAKE_ON_CONNECT) |
+			      device_may_wakeup(&usb4->dev)) && !configured)
 				val |= PORT_CS_19_WOC;
-			if ((flags & TB_WAKE_ON_DISCONNECT) && configured)
+			if (((flags & TB_WAKE_ON_DISCONNECT) |
+			      device_may_wakeup(&usb4->dev)) && configured)
 				val |= PORT_CS_19_WOD;
 			if ((flags & TB_WAKE_ON_USB4) && configured)
 				val |= PORT_CS_19_WOU4;
diff --git a/drivers/thunderbolt/usb4_port.c b/drivers/thunderbolt/usb4_port.c
index 6b02945624ee..442ed1152e59 100644
--- a/drivers/thunderbolt/usb4_port.c
+++ b/drivers/thunderbolt/usb4_port.c
@@ -282,6 +282,9 @@  struct usb4_port *usb4_port_device_add(struct tb_port *port)
 		}
 	}
 
+	if (!tb_is_upstream_port(port))
+		device_set_wakeup_capable(&usb4->dev, true);
+
 	pm_runtime_no_callbacks(&usb4->dev);
 	pm_runtime_set_active(&usb4->dev);
 	pm_runtime_enable(&usb4->dev);