| Message ID | 20221102014340.129587-1-gehao@kylinos.cn (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RESEND] xhci: Remove iommu condition for Renesas PCIe controllers | expand |
On Wed, Nov 02, 2022 at 09:43:40AM +0800, gehao wrote: > When we use uPD720201 USB 3.0 Host Controller passthrough to VM > guest os will report follow errors and it can not working. > > xhci_hcd 0000:09:00.0: Host took too long to start, waited 16000 > microseconds. No need to wrap this line. > xhci_hcd 0000:09:00.0: startup error -19. > > Renesas controllers preserve the top half of the address in internal, > non visible registers,and end up with half the address coming from the > kernel, and the other half coming from the firmware. > > For guest os,although our dev->iommu_group = NULL,but we are still under > iommu control. > > This condition is not necessary,because for os with noiommu,doing > anything when there is no iommu is definitely,and when our os with > iommu,it is safe. > > Signed-off-by: gehao <gehao@kylinos.cn> I need a "full" name please, what you use to sign documents. Also, your email fails to validate, so it looks like it was faked. Please fix your email system to properly send validated emails. > --- > drivers/usb/host/xhci.c | 7 +------ > 1 file changed, 1 insertion(+), 6 deletions(-) > > diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c > index 79d7931c048a..589d54ecd2a4 100644 > --- a/drivers/usb/host/xhci.c > +++ b/drivers/usb/host/xhci.c > @@ -227,7 +227,6 @@ int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us) > > static void xhci_zero_64b_regs(struct xhci_hcd *xhci) > { > - struct device *dev = xhci_to_hcd(xhci)->self.sysdev; > int err, i; > u64 val; > u32 intrs; > @@ -241,12 +240,8 @@ static void xhci_zero_64b_regs(struct xhci_hcd *xhci) > * changing the programming leads to extra accesses even if the > * controller is supposed to be halted. The controller ends up with > * a fatal fault, and is then ripe for being properly reset. > - * > - * Special care is taken to only apply this if the device is behind > - * an iommu. Doing anything when there is no iommu is definitely > - * unsafe... > */ > - if (!(xhci->quirks & XHCI_ZERO_64B_REGS) || !device_iommu_mapped(dev)) > + if (!(xhci->quirks & XHCI_ZERO_64B_REGS)) I thought this got rejected as it will break systems. What changed from that? thanks, greg k-h
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 79d7931c048a..589d54ecd2a4 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -227,7 +227,6 @@ int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us) static void xhci_zero_64b_regs(struct xhci_hcd *xhci) { - struct device *dev = xhci_to_hcd(xhci)->self.sysdev; int err, i; u64 val; u32 intrs; @@ -241,12 +240,8 @@ static void xhci_zero_64b_regs(struct xhci_hcd *xhci) * changing the programming leads to extra accesses even if the * controller is supposed to be halted. The controller ends up with * a fatal fault, and is then ripe for being properly reset. - * - * Special care is taken to only apply this if the device is behind - * an iommu. Doing anything when there is no iommu is definitely - * unsafe... */ - if (!(xhci->quirks & XHCI_ZERO_64B_REGS) || !device_iommu_mapped(dev)) + if (!(xhci->quirks & XHCI_ZERO_64B_REGS)) return; xhci_info(xhci, "Zeroing 64bit base registers, expecting fault\n");
When we use uPD720201 USB 3.0 Host Controller passthrough to VM guest os will report follow errors and it can not working. xhci_hcd 0000:09:00.0: Host took too long to start, waited 16000 microseconds. xhci_hcd 0000:09:00.0: startup error -19. Renesas controllers preserve the top half of the address in internal, non visible registers,and end up with half the address coming from the kernel, and the other half coming from the firmware. For guest os,although our dev->iommu_group = NULL,but we are still under iommu control. This condition is not necessary,because for os with noiommu,doing anything when there is no iommu is definitely,and when our os with iommu,it is safe. Signed-off-by: gehao <gehao@kylinos.cn> --- drivers/usb/host/xhci.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)