diff mbox series

USB: serial: option: add Quectel EM05-G modem

Message ID 20221111035631.7723-1-duke_xinanwen@163.com (mailing list archive)
State Superseded
Headers show
Series USB: serial: option: add Quectel EM05-G modem | expand

Commit Message

Duke Xin(辛安文) Nov. 11, 2022, 3:56 a.m. UTC
The EM05-G modem has 2 USB configurations that are configurable via the AT
    command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with
    the following interfaces, respectively:

    "RMNET" : AT + DIAG + NMEA + Modem + QMI
    "MBIM"  : MBIM + AT + DIAG + NMEA + Modem

    The detailed description of the USB configuration for each mode as follows:

    RMNET Mode
    --------------
    T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480  MxCh= 0
    D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=2c7c ProdID=0311 Rev= 3.18
    S:  Manufacturer=Quectel
    S:  Product=Quectel EM05-G
    C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
    I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
    E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
    E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
    E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
    E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
    E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
    E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
    E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
    E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
    E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

    MBIM Mode
    --------------
    T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480  MxCh= 0
    D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=2c7c ProdID=0311 Rev= 3.18
    S:  Manufacturer=Quectel
    S:  Product=Quectel EM05-G
    C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
    A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
    I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
    E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
    E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
    E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
    E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
    E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
    E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
    E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
    E:  Ad=89(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
    I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
    E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

    Signed-off-by: Duke Xin <duke_xinanwen@163.com>
    Cc: stable@vger.kernel.org
    Signed-off-by: Johan Hovold <johan@kernel.org>

Signed-off-by: Duke Xin <duke_xinanwen@163.com>
---
 drivers/usb/serial/option.c | 3 +++
 1 file changed, 3 insertions(+)

Comments

Johan Hovold Nov. 15, 2022, 10:04 a.m. UTC | #1
On Fri, Nov 11, 2022 at 11:56:31AM +0800, Duke Xin wrote:
>     The EM05-G modem has 2 USB configurations that are configurable via the AT
>     command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with
>     the following interfaces, respectively:

The commit message (including Subject) should not be indented like this.

>     Signed-off-by: Duke Xin <duke_xinanwen@163.com>
>     Cc: stable@vger.kernel.org
>     Signed-off-by: Johan Hovold <johan@kernel.org>

And I certainly have not signed-off on this yet. You must not add SoB
for anyone but yourself. Please review the process documentation for
what a SoB imply and how it is used, and try again.
 
> Signed-off-by: Duke Xin <duke_xinanwen@163.com>

Johan
diff mbox series

Patch

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 37257a52287d..ec96872e3e5b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -253,6 +253,7 @@  static void option_instat_callback(struct urb *urb);
 #define QUECTEL_PRODUCT_BG96			0x0296
 #define QUECTEL_PRODUCT_EP06			0x0306
 #define QUECTEL_PRODUCT_EM05G			0x030a
+#define QUECTEL_PRODUCT_EM05G_SG		0x0311
 #define QUECTEL_PRODUCT_EM060K			0x030b
 #define QUECTEL_PRODUCT_EM12			0x0512
 #define QUECTEL_PRODUCT_RM500Q			0x0800
@@ -1151,6 +1152,8 @@  static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
 	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff),
 	  .driver_info = RSVD(6) | ZLP },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_SG, 0xff),/* Quectel EM05G 4G LTE,Smart Gateway*/
+	  .driver_info = RSVD(6) | ZLP },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },