| Message ID | 20221119094447.874770-1-duke_xinanwen@163.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | USB: serial: option: add Quectel EM05-G modem | expand |
On Sat, Nov 19, 2022 at 05:44:47PM +0800, Duke Xin wrote: > The EM05-G modem has 2 USB configurations that are configurable via the AT > command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with > the following interfaces, respectively: > > "RMNET" : AT + DIAG + NMEA + Modem + QMI > "MBIM" : MBIM + AT + DIAG + NMEA + Modem > > The detailed description of the USB configuration for each mode as follows: ... > Signed-off-by: Duke Xin <duke_xinanwen@163.com> > --- This looks much better, thanks! In the future, when updating a patch you should include a changelog here below the '---' line and the patch revision should be indicated in the Subject prefix (e.g. this should have been "[PATCH v3]: USB: serial: ..."). > drivers/usb/serial/option.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c > index c3b7f1d98e78..fc14df5033d8 100644 > --- a/drivers/usb/serial/option.c > +++ b/drivers/usb/serial/option.c > @@ -254,6 +254,7 @@ static void option_instat_callback(struct urb *urb); > #define QUECTEL_PRODUCT_BG96 0x0296 > #define QUECTEL_PRODUCT_EP06 0x0306 > #define QUECTEL_PRODUCT_EM05G 0x030a > +#define QUECTEL_PRODUCT_EM05G_SG 0x0311 These defines should be sorted by PID. > #define QUECTEL_PRODUCT_EM060K 0x030b > #define QUECTEL_PRODUCT_EM12 0x0512 > #define QUECTEL_PRODUCT_RM500Q 0x0800 > @@ -1160,6 +1161,8 @@ static const struct usb_device_id option_ids[] = { > { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, > { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff), > .driver_info = RSVD(6) | ZLP }, > + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_SG, 0xff), > + .driver_info = RSVD(6) | ZLP }, And you have some stray whitespace after the comma here, which would have been picked up by scripts/checkpatch.pl which you should run on your patches before submitting them. > { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) }, > { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) }, > { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) }, I've fixed up the above nits (sort order and white space) and applied this one for 6.2 now so you don't need to send a v4 this time. Johan
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index c3b7f1d98e78..fc14df5033d8 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -254,6 +254,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_BG96 0x0296 #define QUECTEL_PRODUCT_EP06 0x0306 #define QUECTEL_PRODUCT_EM05G 0x030a +#define QUECTEL_PRODUCT_EM05G_SG 0x0311 #define QUECTEL_PRODUCT_EM060K 0x030b #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 @@ -1160,6 +1161,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff), .driver_info = RSVD(6) | ZLP }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_SG, 0xff), + .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },
The EM05-G modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0311 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0311 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin <duke_xinanwen@163.com> --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+)