@@ -896,7 +896,7 @@ static int xhci_reset_halted_ep(struct xhci_hcd *xhci, unsigned int slot_id,
}
static int xhci_handle_halted_endpoint(struct xhci_hcd *xhci,
- struct xhci_virt_ep *ep, unsigned int stream_id,
+ struct xhci_virt_ep *ep,
struct xhci_td *td,
enum xhci_ep_reset_type reset_type)
{
@@ -1110,8 +1110,7 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
td->status = -EPROTO;
}
/* reset ep, reset handler cleans up cancelled tds */
- err = xhci_handle_halted_endpoint(xhci, ep, 0, td,
- reset_type);
+ err = xhci_handle_halted_endpoint(xhci, ep, td, reset_type);
if (err)
break;
ep->ep_state &= ~EP_STOP_CMD_PENDING;
@@ -2183,8 +2182,7 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
}
/* Almost same procedure as for STALL_ERROR below */
xhci_clear_hub_tt_buffer(xhci, td, ep);
- xhci_handle_halted_endpoint(xhci, ep, ep_ring->stream_id, td,
- EP_HARD_RESET);
+ xhci_handle_halted_endpoint(xhci, ep, td, EP_HARD_RESET);
return 0;
case COMP_STALL_ERROR:
/*
@@ -2200,8 +2198,7 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
if (ep->ep_index != 0)
xhci_clear_hub_tt_buffer(xhci, td, ep);
- xhci_handle_halted_endpoint(xhci, ep, ep_ring->stream_id, td,
- EP_HARD_RESET);
+ xhci_handle_halted_endpoint(xhci, ep, td, EP_HARD_RESET);
return 0; /* xhci_handle_halted_endpoint marked td cancelled */
default:
@@ -2490,8 +2487,7 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
td->status = 0;
- xhci_handle_halted_endpoint(xhci, ep, ep_ring->stream_id, td,
- EP_SOFT_RESET);
+ xhci_handle_halted_endpoint(xhci, ep, td, EP_SOFT_RESET);
return 0;
default:
/* do nothing */
@@ -2568,10 +2564,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
xhci_dbg(xhci, "Stream transaction error ep %u no id\n",
ep_index);
if (ep->err_count++ > MAX_SOFT_RETRY)
- xhci_handle_halted_endpoint(xhci, ep, 0, NULL,
+ xhci_handle_halted_endpoint(xhci, ep, NULL,
EP_HARD_RESET);
else
- xhci_handle_halted_endpoint(xhci, ep, 0, NULL,
+ xhci_handle_halted_endpoint(xhci, ep, NULL,
EP_SOFT_RESET);
goto cleanup;
case COMP_RING_UNDERRUN:
@@ -2755,9 +2751,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
if (trb_comp_code == COMP_STALL_ERROR ||
xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
trb_comp_code)) {
- xhci_handle_halted_endpoint(xhci, ep,
- ep_ring->stream_id,
- NULL,
+ xhci_handle_halted_endpoint(xhci, ep, NULL,
EP_HARD_RESET);
}
goto cleanup;
@@ -2850,9 +2844,8 @@ static int handle_tx_event(struct xhci_hcd *xhci,
if (trb_comp_code == COMP_STALL_ERROR ||
xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
trb_comp_code))
- xhci_handle_halted_endpoint(xhci, ep,
- ep_ring->stream_id,
- td, EP_HARD_RESET);
+ xhci_handle_halted_endpoint(xhci, ep, td,
+ EP_HARD_RESET);
goto cleanup;
}
The stream_id parameter is no longer used when handling halted endpoints. Remove it Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> --- drivers/usb/host/xhci-ring.c | 27 ++++++++++----------------- 1 file changed, 10 insertions(+), 17 deletions(-)