| Message ID | 20221217161851.829497-1-lsahn@ooseel.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | usbnet: jump to rx_cleanup case instead of calling skb_queue_tail | expand |
On Sun, Dec 18, 2022 at 01:18:51AM +0900, Leesoo Ahn wrote: > The current source pushes skb into dev->done queue by calling > skb_queue_tail() and then, call skb_dequeue() to pop for rx_cleanup state > to free urb and skb next in usbnet_bh(). > It wastes CPU resource with extra instructions. Instead, use return values > jumping to rx_cleanup case directly to free them. Therefore calling > skb_queue_tail() and skb_dequeue() is not necessary. > > The follows are just showing difference between calling skb_queue_tail() > and using return values jumping to rx_cleanup state directly in usbnet_bh() > in Arm64 instructions with perf tool. > > ----------- calling skb_queue_tail() ----------- > │ if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE)) > 7.58 │248: ldr x0, [x20, #16] > 2.46 │24c: ldr w0, [x0, #8] > 1.64 │250: ↑ tbnz w0, #14, 16c > │ dev->net->stats.rx_errors++; > 0.57 │254: ldr x1, [x20, #184] > 1.64 │258: ldr x0, [x1, #336] > 2.65 │25c: add x0, x0, #0x1 > │260: str x0, [x1, #336] > │ skb_queue_tail(&dev->done, skb); > 0.38 │264: mov x1, x19 > │268: mov x0, x21 > 2.27 │26c: → bl skb_queue_tail > 0.57 │270: ↑ b 44 // branch to call skb_dequeue() > > ----------- jumping to rx_cleanup state ----------- > │ if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE)) > 1.69 │25c: ldr x0, [x21, #16] > 4.78 │260: ldr w0, [x0, #8] > 3.28 │264: ↑ tbnz w0, #14, e4 // jump to 'rx_cleanup' state > │ dev->net->stats.rx_errors++; > 0.09 │268: ldr x1, [x21, #184] > 2.72 │26c: ldr x0, [x1, #336] > 3.37 │270: add x0, x0, #0x1 > 0.09 │274: str x0, [x1, #336] > 0.66 │278: ↑ b e4 // branch to 'rx_cleanup' state Interesting, but does this even really matter given the slow speed of the USB hardware? > Signed-off-by: Leesoo Ahn <lsahn@ooseel.net> > --- > drivers/net/usb/usbnet.c | 11 ++++++----- > 1 file changed, 6 insertions(+), 5 deletions(-) > > diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c > index 64a9a80b2309..924392a37297 100644 > --- a/drivers/net/usb/usbnet.c > +++ b/drivers/net/usb/usbnet.c > @@ -555,7 +555,7 @@ static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags) > > /*-------------------------------------------------------------------------*/ > > -static inline void rx_process (struct usbnet *dev, struct sk_buff *skb) > +static inline int rx_process(struct usbnet *dev, struct sk_buff *skb) > { > if (dev->driver_info->rx_fixup && > !dev->driver_info->rx_fixup (dev, skb)) { > @@ -576,11 +576,11 @@ static inline void rx_process (struct usbnet *dev, struct sk_buff *skb) > netif_dbg(dev, rx_err, dev->net, "rx length %d\n", skb->len); > } else { > usbnet_skb_return(dev, skb); > - return; > + return 0; > } > > done: > - skb_queue_tail(&dev->done, skb); > + return -1; Don't make up error numbers, this makes it look like this failed, not succeeded. And if this failed, give it a real error value. thanks, greg k-h
On Sun, Dec 18, 2022 at 09:55:44AM +0100, Greg KH wrote: > On Sun, Dec 18, 2022 at 01:18:51AM +0900, Leesoo Ahn wrote: > > The current source pushes skb into dev->done queue by calling > > skb_queue_tail() and then, call skb_dequeue() to pop for rx_cleanup state > > to free urb and skb next in usbnet_bh(). > > It wastes CPU resource with extra instructions. Instead, use return values > > jumping to rx_cleanup case directly to free them. Therefore calling > > skb_queue_tail() and skb_dequeue() is not necessary. > > > > The follows are just showing difference between calling skb_queue_tail() > > and using return values jumping to rx_cleanup state directly in usbnet_bh() > > in Arm64 instructions with perf tool. > > > > ----------- calling skb_queue_tail() ----------- > > │ if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE)) > > 7.58 │248: ldr x0, [x20, #16] > > 2.46 │24c: ldr w0, [x0, #8] > > 1.64 │250: ↑ tbnz w0, #14, 16c > > │ dev->net->stats.rx_errors++; > > 0.57 │254: ldr x1, [x20, #184] > > 1.64 │258: ldr x0, [x1, #336] > > 2.65 │25c: add x0, x0, #0x1 > > │260: str x0, [x1, #336] > > │ skb_queue_tail(&dev->done, skb); > > 0.38 │264: mov x1, x19 > > │268: mov x0, x21 > > 2.27 │26c: → bl skb_queue_tail > > 0.57 │270: ↑ b 44 // branch to call skb_dequeue() > > > > ----------- jumping to rx_cleanup state ----------- > > │ if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE)) > > 1.69 │25c: ldr x0, [x21, #16] > > 4.78 │260: ldr w0, [x0, #8] > > 3.28 │264: ↑ tbnz w0, #14, e4 // jump to 'rx_cleanup' state > > │ dev->net->stats.rx_errors++; > > 0.09 │268: ldr x1, [x21, #184] > > 2.72 │26c: ldr x0, [x1, #336] > > 3.37 │270: add x0, x0, #0x1 > > 0.09 │274: str x0, [x1, #336] > > 0.66 │278: ↑ b e4 // branch to 'rx_cleanup' state > > Interesting, but does this even really matter given the slow speed of > the USB hardware? On the other side, it is pretty nice optimization and a proof someone read the code really carefully. > > Signed-off-by: Leesoo Ahn <lsahn@ooseel.net> > > --- > > drivers/net/usb/usbnet.c | 11 ++++++----- > > 1 file changed, 6 insertions(+), 5 deletions(-) > > > > diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c > > index 64a9a80b2309..924392a37297 100644 > > --- a/drivers/net/usb/usbnet.c > > +++ b/drivers/net/usb/usbnet.c > > @@ -555,7 +555,7 @@ static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags) > > > > /*-------------------------------------------------------------------------*/ > > > > -static inline void rx_process (struct usbnet *dev, struct sk_buff *skb) > > +static inline int rx_process(struct usbnet *dev, struct sk_buff *skb) > > { > > if (dev->driver_info->rx_fixup && > > !dev->driver_info->rx_fixup (dev, skb)) { > > @@ -576,11 +576,11 @@ static inline void rx_process (struct usbnet *dev, struct sk_buff *skb) > > netif_dbg(dev, rx_err, dev->net, "rx length %d\n", skb->len); > > } else { > > usbnet_skb_return(dev, skb); > > - return; > > + return 0; > > } > > > > done: > > - skb_queue_tail(&dev->done, skb); > > + return -1; > > Don't make up error numbers, this makes it look like this failed, not > succeeded. And if this failed, give it a real error value. Note that jumps to 'done' label can be avoided now, so eventual v2 version of that patch doesn't increase total goto entropy. l. > thanks, > > greg k-h
On 22. 12. 18. 17:55, Greg KH wrote: > On Sun, Dec 18, 2022 at 01:18:51AM +0900, Leesoo Ahn wrote: >> The current source pushes skb into dev->done queue by calling >> skb_queue_tail() and then, call skb_dequeue() to pop for rx_cleanup state >> to free urb and skb next in usbnet_bh(). >> It wastes CPU resource with extra instructions. Instead, use return values >> jumping to rx_cleanup case directly to free them. Therefore calling >> skb_queue_tail() and skb_dequeue() is not necessary. >> >> The follows are just showing difference between calling skb_queue_tail() >> and using return values jumping to rx_cleanup state directly in usbnet_bh() >> in Arm64 instructions with perf tool. >> >> ----------- calling skb_queue_tail() ----------- >> │ if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE)) >> 7.58 │248: ldr x0, [x20, #16] >> 2.46 │24c: ldr w0, [x0, #8] >> 1.64 │250: ↑ tbnz w0, #14, 16c >> │ dev->net->stats.rx_errors++; >> 0.57 │254: ldr x1, [x20, #184] >> 1.64 │258: ldr x0, [x1, #336] >> 2.65 │25c: add x0, x0, #0x1 >> │260: str x0, [x1, #336] >> │ skb_queue_tail(&dev->done, skb); >> 0.38 │264: mov x1, x19 >> │268: mov x0, x21 >> 2.27 │26c: → bl skb_queue_tail >> 0.57 │270: ↑ b 44 // branch to call skb_dequeue() >> >> ----------- jumping to rx_cleanup state ----------- >> │ if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE)) >> 1.69 │25c: ldr x0, [x21, #16] >> 4.78 │260: ldr w0, [x0, #8] >> 3.28 │264: ↑ tbnz w0, #14, e4 // jump to 'rx_cleanup' state >> │ dev->net->stats.rx_errors++; >> 0.09 │268: ldr x1, [x21, #184] >> 2.72 │26c: ldr x0, [x1, #336] >> 3.37 │270: add x0, x0, #0x1 >> 0.09 │274: str x0, [x1, #336] >> 0.66 │278: ↑ b e4 // branch to 'rx_cleanup' state > Interesting, but does this even really matter given the slow speed of > the USB hardware? It doesn't if USB hardware has slow speed but in software view, it's still worth avoiding calling skb_queue_tail() and skb_dequeue() which work with spinlock, if possible. >> Signed-off-by: Leesoo Ahn <lsahn@ooseel.net> >> --- >> drivers/net/usb/usbnet.c | 11 ++++++----- >> 1 file changed, 6 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c >> index 64a9a80b2309..924392a37297 100644 >> --- a/drivers/net/usb/usbnet.c >> +++ b/drivers/net/usb/usbnet.c >> @@ -555,7 +555,7 @@ static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags) >> >> /*-------------------------------------------------------------------------*/ >> >> -static inline void rx_process (struct usbnet *dev, struct sk_buff *skb) >> +static inline int rx_process(struct usbnet *dev, struct sk_buff *skb) >> { >> if (dev->driver_info->rx_fixup && >> !dev->driver_info->rx_fixup (dev, skb)) { >> @@ -576,11 +576,11 @@ static inline void rx_process (struct usbnet *dev, struct sk_buff *skb) >> netif_dbg(dev, rx_err, dev->net, "rx length %d\n", skb->len); >> } else { >> usbnet_skb_return(dev, skb); >> - return; >> + return 0; >> } >> >> done: >> - skb_queue_tail(&dev->done, skb); >> + return -1; > Don't make up error numbers, this makes it look like this failed, not > succeeded. And if this failed, give it a real error value. > > thanks, > > greg k-h Best regards, Leesoo
On Mon, Dec 19, 2022 at 04:41:16PM +0900, Leesoo Ahn wrote: > > On 22. 12. 18. 17:55, Greg KH wrote: > > On Sun, Dec 18, 2022 at 01:18:51AM +0900, Leesoo Ahn wrote: > > > The current source pushes skb into dev->done queue by calling > > > skb_queue_tail() and then, call skb_dequeue() to pop for rx_cleanup state > > > to free urb and skb next in usbnet_bh(). > > > It wastes CPU resource with extra instructions. Instead, use return values > > > jumping to rx_cleanup case directly to free them. Therefore calling > > > skb_queue_tail() and skb_dequeue() is not necessary. > > > > > > The follows are just showing difference between calling skb_queue_tail() > > > and using return values jumping to rx_cleanup state directly in usbnet_bh() > > > in Arm64 instructions with perf tool. > > > > > > ----------- calling skb_queue_tail() ----------- > > > │ if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE)) > > > 7.58 │248: ldr x0, [x20, #16] > > > 2.46 │24c: ldr w0, [x0, #8] > > > 1.64 │250: ↑ tbnz w0, #14, 16c > > > │ dev->net->stats.rx_errors++; > > > 0.57 │254: ldr x1, [x20, #184] > > > 1.64 │258: ldr x0, [x1, #336] > > > 2.65 │25c: add x0, x0, #0x1 > > > │260: str x0, [x1, #336] > > > │ skb_queue_tail(&dev->done, skb); > > > 0.38 │264: mov x1, x19 > > > │268: mov x0, x21 > > > 2.27 │26c: → bl skb_queue_tail > > > 0.57 │270: ↑ b 44 // branch to call skb_dequeue() > > > > > > ----------- jumping to rx_cleanup state ----------- > > > │ if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE)) > > > 1.69 │25c: ldr x0, [x21, #16] > > > 4.78 │260: ldr w0, [x0, #8] > > > 3.28 │264: ↑ tbnz w0, #14, e4 // jump to 'rx_cleanup' state > > > │ dev->net->stats.rx_errors++; > > > 0.09 │268: ldr x1, [x21, #184] > > > 2.72 │26c: ldr x0, [x1, #336] > > > 3.37 │270: add x0, x0, #0x1 > > > 0.09 │274: str x0, [x1, #336] > > > 0.66 │278: ↑ b e4 // branch to 'rx_cleanup' state > > Interesting, but does this even really matter given the slow speed of > > the USB hardware? > > It doesn't if USB hardware has slow speed but in software view, it's still > worth avoiding calling skb_queue_tail() and skb_dequeue() which work with > spinlock, if possible. But can you actually measure that in either CPU load or in increased transfer speeds? thanks, greg k-h
On 22. 12. 19. 16:50, Greg KH wrote: > On Mon, Dec 19, 2022 at 04:41:16PM +0900, Leesoo Ahn wrote: >> On 22. 12. 18. 17:55, Greg KH wrote: >>> On Sun, Dec 18, 2022 at 01:18:51AM +0900, Leesoo Ahn wrote: >>>> The current source pushes skb into dev->done queue by calling >>>> skb_queue_tail() and then, call skb_dequeue() to pop for rx_cleanup state >>>> to free urb and skb next in usbnet_bh(). >>>> It wastes CPU resource with extra instructions. Instead, use return values >>>> jumping to rx_cleanup case directly to free them. Therefore calling >>>> skb_queue_tail() and skb_dequeue() is not necessary. >>>> >>>> The follows are just showing difference between calling skb_queue_tail() >>>> and using return values jumping to rx_cleanup state directly in usbnet_bh() >>>> in Arm64 instructions with perf tool. >>>> >>>> ----------- calling skb_queue_tail() ----------- >>>> │ if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE)) >>>> 7.58 │248: ldr x0, [x20, #16] >>>> 2.46 │24c: ldr w0, [x0, #8] >>>> 1.64 │250: ↑ tbnz w0, #14, 16c >>>> │ dev->net->stats.rx_errors++; >>>> 0.57 │254: ldr x1, [x20, #184] >>>> 1.64 │258: ldr x0, [x1, #336] >>>> 2.65 │25c: add x0, x0, #0x1 >>>> │260: str x0, [x1, #336] >>>> │ skb_queue_tail(&dev->done, skb); >>>> 0.38 │264: mov x1, x19 >>>> │268: mov x0, x21 >>>> 2.27 │26c: → bl skb_queue_tail >>>> 0.57 │270: ↑ b 44 // branch to call skb_dequeue() >>>> >>>> ----------- jumping to rx_cleanup state ----------- >>>> │ if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE)) >>>> 1.69 │25c: ldr x0, [x21, #16] >>>> 4.78 │260: ldr w0, [x0, #8] >>>> 3.28 │264: ↑ tbnz w0, #14, e4 // jump to 'rx_cleanup' state >>>> │ dev->net->stats.rx_errors++; >>>> 0.09 │268: ldr x1, [x21, #184] >>>> 2.72 │26c: ldr x0, [x1, #336] >>>> 3.37 │270: add x0, x0, #0x1 >>>> 0.09 │274: str x0, [x1, #336] >>>> 0.66 │278: ↑ b e4 // branch to 'rx_cleanup' state >>> Interesting, but does this even really matter given the slow speed of >>> the USB hardware? >> It doesn't if USB hardware has slow speed but in software view, it's still >> worth avoiding calling skb_queue_tail() and skb_dequeue() which work with >> spinlock, if possible. > But can you actually measure that in either CPU load or in increased > transfer speeds? > > thanks, > > greg k-h I think the follows are maybe what you would be interested in. I have tested both case with perf on the same machine and environments, also modified driver code a bit to go to rx_cleanup case, not to net stack in a specific packet. ----- calling skb_queue_tail() ----- - 11.58% 0.26% swapper [k] usbnet_bh - 11.32% usbnet_bh - 6.43% skb_dequeue 6.34% _raw_spin_unlock_irqrestore - 2.21% skb_queue_tail 2.19% _raw_spin_unlock_irqrestore - 1.68% consume_skb - 0.97% kfree_skbmem 0.80% kmem_cache_free 0.53% skb_release_data ----- jump to rx_cleanup directly ----- - 7.62% 0.18% swapper [k] usbnet_bh - 7.44% usbnet_bh - 4.63% skb_dequeue 4.57% _raw_spin_unlock_irqrestore - 1.76% consume_skb - 1.03% kfree_skbmem 0.86% kmem_cache_free 0.56% skb_release_data 0.54% smsc95xx_rx_fixup The first case takes CPU resource a bit much by the result. Thank you for reviewing, by the way. Best regards, Leesoo
On Mon, Dec 19, 2022 at 05:09:21PM +0900, Leesoo Ahn wrote: > > On 22. 12. 19. 16:50, Greg KH wrote: > > On Mon, Dec 19, 2022 at 04:41:16PM +0900, Leesoo Ahn wrote: > > > On 22. 12. 18. 17:55, Greg KH wrote: > > > > On Sun, Dec 18, 2022 at 01:18:51AM +0900, Leesoo Ahn wrote: > > > > > The current source pushes skb into dev->done queue by calling > > > > > skb_queue_tail() and then, call skb_dequeue() to pop for rx_cleanup state > > > > > to free urb and skb next in usbnet_bh(). > > > > > It wastes CPU resource with extra instructions. Instead, use return values > > > > > jumping to rx_cleanup case directly to free them. Therefore calling > > > > > skb_queue_tail() and skb_dequeue() is not necessary. > > > > > > > > > > The follows are just showing difference between calling skb_queue_tail() > > > > > and using return values jumping to rx_cleanup state directly in usbnet_bh() > > > > > in Arm64 instructions with perf tool. > > > > > > > > > > ----------- calling skb_queue_tail() ----------- > > > > > │ if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE)) > > > > > 7.58 │248: ldr x0, [x20, #16] > > > > > 2.46 │24c: ldr w0, [x0, #8] > > > > > 1.64 │250: ↑ tbnz w0, #14, 16c > > > > > │ dev->net->stats.rx_errors++; > > > > > 0.57 │254: ldr x1, [x20, #184] > > > > > 1.64 │258: ldr x0, [x1, #336] > > > > > 2.65 │25c: add x0, x0, #0x1 > > > > > │260: str x0, [x1, #336] > > > > > │ skb_queue_tail(&dev->done, skb); > > > > > 0.38 │264: mov x1, x19 > > > > > │268: mov x0, x21 > > > > > 2.27 │26c: → bl skb_queue_tail > > > > > 0.57 │270: ↑ b 44 // branch to call skb_dequeue() > > > > > > > > > > ----------- jumping to rx_cleanup state ----------- > > > > > │ if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE)) > > > > > 1.69 │25c: ldr x0, [x21, #16] > > > > > 4.78 │260: ldr w0, [x0, #8] > > > > > 3.28 │264: ↑ tbnz w0, #14, e4 // jump to 'rx_cleanup' state > > > > > │ dev->net->stats.rx_errors++; > > > > > 0.09 │268: ldr x1, [x21, #184] > > > > > 2.72 │26c: ldr x0, [x1, #336] > > > > > 3.37 │270: add x0, x0, #0x1 > > > > > 0.09 │274: str x0, [x1, #336] > > > > > 0.66 │278: ↑ b e4 // branch to 'rx_cleanup' state > > > > Interesting, but does this even really matter given the slow speed of > > > > the USB hardware? > > > It doesn't if USB hardware has slow speed but in software view, it's still > > > worth avoiding calling skb_queue_tail() and skb_dequeue() which work with > > > spinlock, if possible. > > But can you actually measure that in either CPU load or in increased > > transfer speeds? > > > > thanks, > > > > greg k-h > > I think the follows are maybe what you would be interested in. I have tested > both case with perf on the same machine and environments, also modified > driver code a bit to go to rx_cleanup case, not to net stack in a specific > packet. > > ----- calling skb_queue_tail() ----- > - 11.58% 0.26% swapper [k] usbnet_bh > - 11.32% usbnet_bh > - 6.43% skb_dequeue > 6.34% _raw_spin_unlock_irqrestore > - 2.21% skb_queue_tail > 2.19% _raw_spin_unlock_irqrestore > - 1.68% consume_skb > - 0.97% kfree_skbmem > 0.80% kmem_cache_free > 0.53% skb_release_data > > ----- jump to rx_cleanup directly ----- > - 7.62% 0.18% swapper [k] usbnet_bh > - 7.44% usbnet_bh > - 4.63% skb_dequeue > 4.57% _raw_spin_unlock_irqrestore > - 1.76% consume_skb > - 1.03% kfree_skbmem > 0.86% kmem_cache_free > 0.56% skb_release_data > 0.54% smsc95xx_rx_fixup > > The first case takes CPU resource a bit much by the result. Ok, great! Fix up the patch based on the review comments and add this information to the changelog as well. thanks, greg k-h
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 64a9a80b2309..924392a37297 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -555,7 +555,7 @@ static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags) /*-------------------------------------------------------------------------*/ -static inline void rx_process (struct usbnet *dev, struct sk_buff *skb) +static inline int rx_process(struct usbnet *dev, struct sk_buff *skb) { if (dev->driver_info->rx_fixup && !dev->driver_info->rx_fixup (dev, skb)) { @@ -576,11 +576,11 @@ static inline void rx_process (struct usbnet *dev, struct sk_buff *skb) netif_dbg(dev, rx_err, dev->net, "rx length %d\n", skb->len); } else { usbnet_skb_return(dev, skb); - return; + return 0; } done: - skb_queue_tail(&dev->done, skb); + return -1; } /*-------------------------------------------------------------------------*/ @@ -1528,13 +1528,14 @@ static void usbnet_bh (struct timer_list *t) entry = (struct skb_data *) skb->cb; switch (entry->state) { case rx_done: - entry->state = rx_cleanup; - rx_process (dev, skb); + if (rx_process(dev, skb)) + goto cleanup; continue; case tx_done: kfree(entry->urb->sg); fallthrough; case rx_cleanup: +cleanup: usb_free_urb (entry->urb); dev_kfree_skb (skb); continue;
The current source pushes skb into dev->done queue by calling skb_queue_tail() and then, call skb_dequeue() to pop for rx_cleanup state to free urb and skb next in usbnet_bh(). It wastes CPU resource with extra instructions. Instead, use return values jumping to rx_cleanup case directly to free them. Therefore calling skb_queue_tail() and skb_dequeue() is not necessary. The follows are just showing difference between calling skb_queue_tail() and using return values jumping to rx_cleanup state directly in usbnet_bh() in Arm64 instructions with perf tool. ----------- calling skb_queue_tail() ----------- │ if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE)) 7.58 │248: ldr x0, [x20, #16] 2.46 │24c: ldr w0, [x0, #8] 1.64 │250: ↑ tbnz w0, #14, 16c │ dev->net->stats.rx_errors++; 0.57 │254: ldr x1, [x20, #184] 1.64 │258: ldr x0, [x1, #336] 2.65 │25c: add x0, x0, #0x1 │260: str x0, [x1, #336] │ skb_queue_tail(&dev->done, skb); 0.38 │264: mov x1, x19 │268: mov x0, x21 2.27 │26c: → bl skb_queue_tail 0.57 │270: ↑ b 44 // branch to call skb_dequeue() ----------- jumping to rx_cleanup state ----------- │ if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE)) 1.69 │25c: ldr x0, [x21, #16] 4.78 │260: ldr w0, [x0, #8] 3.28 │264: ↑ tbnz w0, #14, e4 // jump to 'rx_cleanup' state │ dev->net->stats.rx_errors++; 0.09 │268: ldr x1, [x21, #184] 2.72 │26c: ldr x0, [x1, #336] 3.37 │270: add x0, x0, #0x1 0.09 │274: str x0, [x1, #336] 0.66 │278: ↑ b e4 // branch to 'rx_cleanup' state Signed-off-by: Leesoo Ahn <lsahn@ooseel.net> --- drivers/net/usb/usbnet.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)