| Message ID | 20221226234751.444917-2-mjg59@srcf.ucam.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [V2,1/3] USB: serial: option: Add generic MDM9207 configurations | expand |
On Mon, Dec 26, 2022 at 03:47:49PM -0800, Matthew Garrett wrote: > The Orbic Speed RC400L presents as a generic MDM9207 device that supports > multiple configurations. Add support for the two that expose a set of serial > ports. Would you mind including the output of usb-devices for this device here for completeness? > Signed-off-by: Matthew Garrett <mgarrett@aurora.tech> > --- > drivers/usb/serial/option.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c > index dee79c7d82d5..5025810db8c9 100644 > --- a/drivers/usb/serial/option.c > +++ b/drivers/usb/serial/option.c > @@ -1119,6 +1119,12 @@ static const struct usb_device_id option_ids[] = { > { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */ > { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000), /* SIMCom SIM5218 */ > .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) | NCTRL(3) | RSVD(4) }, > + /* Qualcomm MDM9207 - 0: DIAG, 1: modem, 2: AT, 3: NMEA, 4: adb, 5: QMI */ We typically just include the port layout in the commit message (along with usb-devices output). Then you can move the device comment to the end of the USB_DEVICE() line (cf. ONYX 3G device above). > + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0xf601), > + .driver_info = RSVD(4) | RSVD(5) }, > + /* Qualcomm MDM9207 - 0,1: RNDIS, 2: DIAG, 3: modem, 4: AT, 5: NMEA, 6: adb */ > + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0xf622), > + .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, > /* Quectel products using Qualcomm vendor ID */ > { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)}, > { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20), Johan
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index dee79c7d82d5..5025810db8c9 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1119,6 +1119,12 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000), /* SIMCom SIM5218 */ .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) | NCTRL(3) | RSVD(4) }, + /* Qualcomm MDM9207 - 0: DIAG, 1: modem, 2: AT, 3: NMEA, 4: adb, 5: QMI */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0xf601), + .driver_info = RSVD(4) | RSVD(5) }, + /* Qualcomm MDM9207 - 0,1: RNDIS, 2: DIAG, 3: modem, 4: AT, 5: NMEA, 6: adb */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0xf622), + .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, /* Quectel products using Qualcomm vendor ID */ { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)}, { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20),
The Orbic Speed RC400L presents as a generic MDM9207 device that supports multiple configurations. Add support for the two that expose a set of serial ports. Signed-off-by: Matthew Garrett <mgarrett@aurora.tech> --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+)