| Message ID | 20230113062339.1909087-7-hch@lst.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [01/22] gpu/drm: remove the shmobile drm driver | expand |
On 1/12/23 22:23, Christoph Hellwig wrote: > Now that arch/sh is removed this driver is dead code. > > Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Guenter Roeck <linux@roeck-us.net> > --- > .../watchdog/watchdog-parameters.rst | 12 - > drivers/watchdog/Kconfig | 20 - > drivers/watchdog/Makefile | 3 - > drivers/watchdog/shwdt.c | 344 ------------------ > 4 files changed, 379 deletions(-) > delete mode 100644 drivers/watchdog/shwdt.c > > diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst > index 29153eed668900..553ac2f8ae23f7 100644 > --- a/Documentation/watchdog/watchdog-parameters.rst > +++ b/Documentation/watchdog/watchdog-parameters.rst > @@ -579,18 +579,6 @@ scx200_wdt: > > ------------------------------------------------- > > -shwdt: > - clock_division_ratio: > - Clock division ratio. Valid ranges are from 0x5 (1.31ms) > - to 0x7 (5.25ms). (default=7) > - heartbeat: > - Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30 > - nowayout: > - Watchdog cannot be stopped once started > - (default=kernel config parameter) > - > -------------------------------------------------- > - > smsc37b787_wdt: > timeout: > range is 1-255 units, default is 60 > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > index 0bc40b763b0652..7db0a5e636cf65 100644 > --- a/drivers/watchdog/Kconfig > +++ b/drivers/watchdog/Kconfig > @@ -2015,26 +2015,6 @@ config DIAG288_WATCHDOG > To compile this driver as a module, choose M here. The module > will be called diag288_wdt. > > -# SUPERH (sh + sh64) Architecture > - > -config SH_WDT > - tristate "SuperH Watchdog" > - depends on SUPERH && (CPU_SH3 || CPU_SH4 || COMPILE_TEST) > - select WATCHDOG_CORE > - help > - This driver adds watchdog support for the integrated watchdog in the > - SuperH processors. If you have one of these processors and wish > - to have watchdog support enabled, say Y, otherwise say N. > - > - As a side note, saying Y here will automatically boost HZ to 1000 > - so that the timer has a chance to clear the overflow counter. On > - slower systems (such as the SH-2 and SH-3) this will likely yield > - some performance issues. As such, the WDT should be avoided here > - unless it is absolutely necessary. > - > - To compile this driver as a module, choose M here: the > - module will be called shwdt. > - > # SPARC Architecture > > # SPARC64 Architecture > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile > index 9cbf6580f16c9f..a852ab4d7176ac 100644 > --- a/drivers/watchdog/Makefile > +++ b/drivers/watchdog/Makefile > @@ -195,9 +195,6 @@ obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o > # S390 Architecture > obj-$(CONFIG_DIAG288_WATCHDOG) += diag288_wdt.o > > -# SUPERH (sh + sh64) Architecture > -obj-$(CONFIG_SH_WDT) += shwdt.o > - > # SPARC Architecture > > # SPARC64 Architecture > diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c > deleted file mode 100644 > index f55533e0e0454e..00000000000000 > --- a/drivers/watchdog/shwdt.c > +++ /dev/null > @@ -1,344 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later > -/* > - * drivers/watchdog/shwdt.c > - * > - * Watchdog driver for integrated watchdog in the SuperH processors. > - * > - * Copyright (C) 2001 - 2012 Paul Mundt <lethal@linux-sh.org> > - * > - * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> > - * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT > - * > - * 19-Apr-2002 Rob Radez <rob@osinvestor.com> > - * Added expect close support, made emulated timeout runtime changeable > - * general cleanups, add some ioctls > - */ > - > -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > - > -#include <linux/module.h> > -#include <linux/moduleparam.h> > -#include <linux/platform_device.h> > -#include <linux/init.h> > -#include <linux/types.h> > -#include <linux/spinlock.h> > -#include <linux/watchdog.h> > -#include <linux/pm_runtime.h> > -#include <linux/fs.h> > -#include <linux/mm.h> > -#include <linux/slab.h> > -#include <linux/io.h> > -#include <linux/clk.h> > -#include <linux/err.h> > -#include <asm/watchdog.h> > - > -#define DRV_NAME "sh-wdt" > - > -/* > - * Default clock division ratio is 5.25 msecs. For an additional table of > - * values, consult the asm-sh/watchdog.h. Overload this at module load > - * time. > - * > - * In order for this to work reliably we need to have HZ set to 1000 or > - * something quite higher than 100 (or we need a proper high-res timer > - * implementation that will deal with this properly), otherwise the 10ms > - * resolution of a jiffy is enough to trigger the overflow. For things like > - * the SH-4 and SH-5, this isn't necessarily that big of a problem, though > - * for the SH-2 and SH-3, this isn't recommended unless the WDT is absolutely > - * necssary. > - * > - * As a result of this timing problem, the only modes that are particularly > - * feasible are the 4096 and the 2048 divisors, which yield 5.25 and 2.62ms > - * overflow periods respectively. > - * > - * Also, since we can't really expect userspace to be responsive enough > - * before the overflow happens, we maintain two separate timers .. One in > - * the kernel for clearing out WOVF every 2ms or so (again, this depends on > - * HZ == 1000), and another for monitoring userspace writes to the WDT device. > - * > - * As such, we currently use a configurable heartbeat interval which defaults > - * to 30s. In this case, the userspace daemon is only responsible for periodic > - * writes to the device before the next heartbeat is scheduled. If the daemon > - * misses its deadline, the kernel timer will allow the WDT to overflow. > - */ > -static int clock_division_ratio = WTCSR_CKS_4096; > -#define next_ping_period(cks) (jiffies + msecs_to_jiffies(cks - 4)) > - > -#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */ > -static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */ > -static bool nowayout = WATCHDOG_NOWAYOUT; > -static unsigned long next_heartbeat; > - > -struct sh_wdt { > - void __iomem *base; > - struct device *dev; > - struct clk *clk; > - spinlock_t lock; > - > - struct timer_list timer; > -}; > - > -static int sh_wdt_start(struct watchdog_device *wdt_dev) > -{ > - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev); > - unsigned long flags; > - u8 csr; > - > - pm_runtime_get_sync(wdt->dev); > - clk_enable(wdt->clk); > - > - spin_lock_irqsave(&wdt->lock, flags); > - > - next_heartbeat = jiffies + (heartbeat * HZ); > - mod_timer(&wdt->timer, next_ping_period(clock_division_ratio)); > - > - csr = sh_wdt_read_csr(); > - csr |= WTCSR_WT | clock_division_ratio; > - sh_wdt_write_csr(csr); > - > - sh_wdt_write_cnt(0); > - > - /* > - * These processors have a bit of an inconsistent initialization > - * process.. starting with SH-3, RSTS was moved to WTCSR, and the > - * RSTCSR register was removed. > - * > - * On the SH-2 however, in addition with bits being in different > - * locations, we must deal with RSTCSR outright.. > - */ > - csr = sh_wdt_read_csr(); > - csr |= WTCSR_TME; > - csr &= ~WTCSR_RSTS; > - sh_wdt_write_csr(csr); > - > -#ifdef CONFIG_CPU_SH2 > - csr = sh_wdt_read_rstcsr(); > - csr &= ~RSTCSR_RSTS; > - sh_wdt_write_rstcsr(csr); > -#endif > - spin_unlock_irqrestore(&wdt->lock, flags); > - > - return 0; > -} > - > -static int sh_wdt_stop(struct watchdog_device *wdt_dev) > -{ > - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev); > - unsigned long flags; > - u8 csr; > - > - spin_lock_irqsave(&wdt->lock, flags); > - > - del_timer(&wdt->timer); > - > - csr = sh_wdt_read_csr(); > - csr &= ~WTCSR_TME; > - sh_wdt_write_csr(csr); > - > - spin_unlock_irqrestore(&wdt->lock, flags); > - > - clk_disable(wdt->clk); > - pm_runtime_put_sync(wdt->dev); > - > - return 0; > -} > - > -static int sh_wdt_keepalive(struct watchdog_device *wdt_dev) > -{ > - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev); > - unsigned long flags; > - > - spin_lock_irqsave(&wdt->lock, flags); > - next_heartbeat = jiffies + (heartbeat * HZ); > - spin_unlock_irqrestore(&wdt->lock, flags); > - > - return 0; > -} > - > -static int sh_wdt_set_heartbeat(struct watchdog_device *wdt_dev, unsigned t) > -{ > - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev); > - unsigned long flags; > - > - if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */ > - return -EINVAL; > - > - spin_lock_irqsave(&wdt->lock, flags); > - heartbeat = t; > - wdt_dev->timeout = t; > - spin_unlock_irqrestore(&wdt->lock, flags); > - > - return 0; > -} > - > -static void sh_wdt_ping(struct timer_list *t) > -{ > - struct sh_wdt *wdt = from_timer(wdt, t, timer); > - unsigned long flags; > - > - spin_lock_irqsave(&wdt->lock, flags); > - if (time_before(jiffies, next_heartbeat)) { > - u8 csr; > - > - csr = sh_wdt_read_csr(); > - csr &= ~WTCSR_IOVF; > - sh_wdt_write_csr(csr); > - > - sh_wdt_write_cnt(0); > - > - mod_timer(&wdt->timer, next_ping_period(clock_division_ratio)); > - } else > - dev_warn(wdt->dev, "Heartbeat lost! Will not ping " > - "the watchdog\n"); > - spin_unlock_irqrestore(&wdt->lock, flags); > -} > - > -static const struct watchdog_info sh_wdt_info = { > - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | > - WDIOF_MAGICCLOSE, > - .firmware_version = 1, > - .identity = "SH WDT", > -}; > - > -static const struct watchdog_ops sh_wdt_ops = { > - .owner = THIS_MODULE, > - .start = sh_wdt_start, > - .stop = sh_wdt_stop, > - .ping = sh_wdt_keepalive, > - .set_timeout = sh_wdt_set_heartbeat, > -}; > - > -static struct watchdog_device sh_wdt_dev = { > - .info = &sh_wdt_info, > - .ops = &sh_wdt_ops, > -}; > - > -static int sh_wdt_probe(struct platform_device *pdev) > -{ > - struct sh_wdt *wdt; > - int rc; > - > - /* > - * As this driver only covers the global watchdog case, reject > - * any attempts to register per-CPU watchdogs. > - */ > - if (pdev->id != -1) > - return -EINVAL; > - > - wdt = devm_kzalloc(&pdev->dev, sizeof(struct sh_wdt), GFP_KERNEL); > - if (unlikely(!wdt)) > - return -ENOMEM; > - > - wdt->dev = &pdev->dev; > - > - wdt->clk = devm_clk_get(&pdev->dev, NULL); > - if (IS_ERR(wdt->clk)) { > - /* > - * Clock framework support is optional, continue on > - * anyways if we don't find a matching clock. > - */ > - wdt->clk = NULL; > - } > - > - wdt->base = devm_platform_ioremap_resource(pdev, 0); > - if (IS_ERR(wdt->base)) > - return PTR_ERR(wdt->base); > - > - watchdog_set_nowayout(&sh_wdt_dev, nowayout); > - watchdog_set_drvdata(&sh_wdt_dev, wdt); > - sh_wdt_dev.parent = &pdev->dev; > - > - spin_lock_init(&wdt->lock); > - > - rc = sh_wdt_set_heartbeat(&sh_wdt_dev, heartbeat); > - if (unlikely(rc)) { > - /* Default timeout if invalid */ > - sh_wdt_set_heartbeat(&sh_wdt_dev, WATCHDOG_HEARTBEAT); > - > - dev_warn(&pdev->dev, > - "heartbeat value must be 1<=x<=3600, using %d\n", > - sh_wdt_dev.timeout); > - } > - > - dev_info(&pdev->dev, "configured with heartbeat=%d sec (nowayout=%d)\n", > - sh_wdt_dev.timeout, nowayout); > - > - rc = watchdog_register_device(&sh_wdt_dev); > - if (unlikely(rc)) { > - dev_err(&pdev->dev, "Can't register watchdog (err=%d)\n", rc); > - return rc; > - } > - > - timer_setup(&wdt->timer, sh_wdt_ping, 0); > - wdt->timer.expires = next_ping_period(clock_division_ratio); > - > - dev_info(&pdev->dev, "initialized.\n"); > - > - pm_runtime_enable(&pdev->dev); > - > - return 0; > -} > - > -static int sh_wdt_remove(struct platform_device *pdev) > -{ > - watchdog_unregister_device(&sh_wdt_dev); > - > - pm_runtime_disable(&pdev->dev); > - > - return 0; > -} > - > -static void sh_wdt_shutdown(struct platform_device *pdev) > -{ > - sh_wdt_stop(&sh_wdt_dev); > -} > - > -static struct platform_driver sh_wdt_driver = { > - .driver = { > - .name = DRV_NAME, > - }, > - > - .probe = sh_wdt_probe, > - .remove = sh_wdt_remove, > - .shutdown = sh_wdt_shutdown, > -}; > - > -static int __init sh_wdt_init(void) > -{ > - if (unlikely(clock_division_ratio < 0x5 || > - clock_division_ratio > 0x7)) { > - clock_division_ratio = WTCSR_CKS_4096; > - > - pr_info("divisor must be 0x5<=x<=0x7, using %d\n", > - clock_division_ratio); > - } > - > - return platform_driver_register(&sh_wdt_driver); > -} > - > -static void __exit sh_wdt_exit(void) > -{ > - platform_driver_unregister(&sh_wdt_driver); > -} > -module_init(sh_wdt_init); > -module_exit(sh_wdt_exit); > - > -MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); > -MODULE_DESCRIPTION("SuperH watchdog driver"); > -MODULE_LICENSE("GPL"); > -MODULE_ALIAS("platform:" DRV_NAME); > - > -module_param(clock_division_ratio, int, 0); > -MODULE_PARM_DESC(clock_division_ratio, > - "Clock division ratio. Valid ranges are from 0x5 (1.31ms) " > - "to 0x7 (5.25ms). (default=" __MODULE_STRING(WTCSR_CKS_4096) ")"); > - > -module_param(heartbeat, int, 0); > -MODULE_PARM_DESC(heartbeat, > - "Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=" > - __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); > - > -module_param(nowayout, bool, 0); > -MODULE_PARM_DESC(nowayout, > - "Watchdog cannot be stopped once started (default=" > - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst index 29153eed668900..553ac2f8ae23f7 100644 --- a/Documentation/watchdog/watchdog-parameters.rst +++ b/Documentation/watchdog/watchdog-parameters.rst @@ -579,18 +579,6 @@ scx200_wdt: ------------------------------------------------- -shwdt: - clock_division_ratio: - Clock division ratio. Valid ranges are from 0x5 (1.31ms) - to 0x7 (5.25ms). (default=7) - heartbeat: - Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30 - nowayout: - Watchdog cannot be stopped once started - (default=kernel config parameter) - -------------------------------------------------- - smsc37b787_wdt: timeout: range is 1-255 units, default is 60 diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 0bc40b763b0652..7db0a5e636cf65 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -2015,26 +2015,6 @@ config DIAG288_WATCHDOG To compile this driver as a module, choose M here. The module will be called diag288_wdt. -# SUPERH (sh + sh64) Architecture - -config SH_WDT - tristate "SuperH Watchdog" - depends on SUPERH && (CPU_SH3 || CPU_SH4 || COMPILE_TEST) - select WATCHDOG_CORE - help - This driver adds watchdog support for the integrated watchdog in the - SuperH processors. If you have one of these processors and wish - to have watchdog support enabled, say Y, otherwise say N. - - As a side note, saying Y here will automatically boost HZ to 1000 - so that the timer has a chance to clear the overflow counter. On - slower systems (such as the SH-2 and SH-3) this will likely yield - some performance issues. As such, the WDT should be avoided here - unless it is absolutely necessary. - - To compile this driver as a module, choose M here: the - module will be called shwdt. - # SPARC Architecture # SPARC64 Architecture diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 9cbf6580f16c9f..a852ab4d7176ac 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -195,9 +195,6 @@ obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o # S390 Architecture obj-$(CONFIG_DIAG288_WATCHDOG) += diag288_wdt.o -# SUPERH (sh + sh64) Architecture -obj-$(CONFIG_SH_WDT) += shwdt.o - # SPARC Architecture # SPARC64 Architecture diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c deleted file mode 100644 index f55533e0e0454e..00000000000000 --- a/drivers/watchdog/shwdt.c +++ /dev/null @@ -1,344 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * drivers/watchdog/shwdt.c - * - * Watchdog driver for integrated watchdog in the SuperH processors. - * - * Copyright (C) 2001 - 2012 Paul Mundt <lethal@linux-sh.org> - * - * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> - * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT - * - * 19-Apr-2002 Rob Radez <rob@osinvestor.com> - * Added expect close support, made emulated timeout runtime changeable - * general cleanups, add some ioctls - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/spinlock.h> -#include <linux/watchdog.h> -#include <linux/pm_runtime.h> -#include <linux/fs.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <asm/watchdog.h> - -#define DRV_NAME "sh-wdt" - -/* - * Default clock division ratio is 5.25 msecs. For an additional table of - * values, consult the asm-sh/watchdog.h. Overload this at module load - * time. - * - * In order for this to work reliably we need to have HZ set to 1000 or - * something quite higher than 100 (or we need a proper high-res timer - * implementation that will deal with this properly), otherwise the 10ms - * resolution of a jiffy is enough to trigger the overflow. For things like - * the SH-4 and SH-5, this isn't necessarily that big of a problem, though - * for the SH-2 and SH-3, this isn't recommended unless the WDT is absolutely - * necssary. - * - * As a result of this timing problem, the only modes that are particularly - * feasible are the 4096 and the 2048 divisors, which yield 5.25 and 2.62ms - * overflow periods respectively. - * - * Also, since we can't really expect userspace to be responsive enough - * before the overflow happens, we maintain two separate timers .. One in - * the kernel for clearing out WOVF every 2ms or so (again, this depends on - * HZ == 1000), and another for monitoring userspace writes to the WDT device. - * - * As such, we currently use a configurable heartbeat interval which defaults - * to 30s. In this case, the userspace daemon is only responsible for periodic - * writes to the device before the next heartbeat is scheduled. If the daemon - * misses its deadline, the kernel timer will allow the WDT to overflow. - */ -static int clock_division_ratio = WTCSR_CKS_4096; -#define next_ping_period(cks) (jiffies + msecs_to_jiffies(cks - 4)) - -#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */ -static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */ -static bool nowayout = WATCHDOG_NOWAYOUT; -static unsigned long next_heartbeat; - -struct sh_wdt { - void __iomem *base; - struct device *dev; - struct clk *clk; - spinlock_t lock; - - struct timer_list timer; -}; - -static int sh_wdt_start(struct watchdog_device *wdt_dev) -{ - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev); - unsigned long flags; - u8 csr; - - pm_runtime_get_sync(wdt->dev); - clk_enable(wdt->clk); - - spin_lock_irqsave(&wdt->lock, flags); - - next_heartbeat = jiffies + (heartbeat * HZ); - mod_timer(&wdt->timer, next_ping_period(clock_division_ratio)); - - csr = sh_wdt_read_csr(); - csr |= WTCSR_WT | clock_division_ratio; - sh_wdt_write_csr(csr); - - sh_wdt_write_cnt(0); - - /* - * These processors have a bit of an inconsistent initialization - * process.. starting with SH-3, RSTS was moved to WTCSR, and the - * RSTCSR register was removed. - * - * On the SH-2 however, in addition with bits being in different - * locations, we must deal with RSTCSR outright.. - */ - csr = sh_wdt_read_csr(); - csr |= WTCSR_TME; - csr &= ~WTCSR_RSTS; - sh_wdt_write_csr(csr); - -#ifdef CONFIG_CPU_SH2 - csr = sh_wdt_read_rstcsr(); - csr &= ~RSTCSR_RSTS; - sh_wdt_write_rstcsr(csr); -#endif - spin_unlock_irqrestore(&wdt->lock, flags); - - return 0; -} - -static int sh_wdt_stop(struct watchdog_device *wdt_dev) -{ - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev); - unsigned long flags; - u8 csr; - - spin_lock_irqsave(&wdt->lock, flags); - - del_timer(&wdt->timer); - - csr = sh_wdt_read_csr(); - csr &= ~WTCSR_TME; - sh_wdt_write_csr(csr); - - spin_unlock_irqrestore(&wdt->lock, flags); - - clk_disable(wdt->clk); - pm_runtime_put_sync(wdt->dev); - - return 0; -} - -static int sh_wdt_keepalive(struct watchdog_device *wdt_dev) -{ - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev); - unsigned long flags; - - spin_lock_irqsave(&wdt->lock, flags); - next_heartbeat = jiffies + (heartbeat * HZ); - spin_unlock_irqrestore(&wdt->lock, flags); - - return 0; -} - -static int sh_wdt_set_heartbeat(struct watchdog_device *wdt_dev, unsigned t) -{ - struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev); - unsigned long flags; - - if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */ - return -EINVAL; - - spin_lock_irqsave(&wdt->lock, flags); - heartbeat = t; - wdt_dev->timeout = t; - spin_unlock_irqrestore(&wdt->lock, flags); - - return 0; -} - -static void sh_wdt_ping(struct timer_list *t) -{ - struct sh_wdt *wdt = from_timer(wdt, t, timer); - unsigned long flags; - - spin_lock_irqsave(&wdt->lock, flags); - if (time_before(jiffies, next_heartbeat)) { - u8 csr; - - csr = sh_wdt_read_csr(); - csr &= ~WTCSR_IOVF; - sh_wdt_write_csr(csr); - - sh_wdt_write_cnt(0); - - mod_timer(&wdt->timer, next_ping_period(clock_division_ratio)); - } else - dev_warn(wdt->dev, "Heartbeat lost! Will not ping " - "the watchdog\n"); - spin_unlock_irqrestore(&wdt->lock, flags); -} - -static const struct watchdog_info sh_wdt_info = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | - WDIOF_MAGICCLOSE, - .firmware_version = 1, - .identity = "SH WDT", -}; - -static const struct watchdog_ops sh_wdt_ops = { - .owner = THIS_MODULE, - .start = sh_wdt_start, - .stop = sh_wdt_stop, - .ping = sh_wdt_keepalive, - .set_timeout = sh_wdt_set_heartbeat, -}; - -static struct watchdog_device sh_wdt_dev = { - .info = &sh_wdt_info, - .ops = &sh_wdt_ops, -}; - -static int sh_wdt_probe(struct platform_device *pdev) -{ - struct sh_wdt *wdt; - int rc; - - /* - * As this driver only covers the global watchdog case, reject - * any attempts to register per-CPU watchdogs. - */ - if (pdev->id != -1) - return -EINVAL; - - wdt = devm_kzalloc(&pdev->dev, sizeof(struct sh_wdt), GFP_KERNEL); - if (unlikely(!wdt)) - return -ENOMEM; - - wdt->dev = &pdev->dev; - - wdt->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(wdt->clk)) { - /* - * Clock framework support is optional, continue on - * anyways if we don't find a matching clock. - */ - wdt->clk = NULL; - } - - wdt->base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(wdt->base)) - return PTR_ERR(wdt->base); - - watchdog_set_nowayout(&sh_wdt_dev, nowayout); - watchdog_set_drvdata(&sh_wdt_dev, wdt); - sh_wdt_dev.parent = &pdev->dev; - - spin_lock_init(&wdt->lock); - - rc = sh_wdt_set_heartbeat(&sh_wdt_dev, heartbeat); - if (unlikely(rc)) { - /* Default timeout if invalid */ - sh_wdt_set_heartbeat(&sh_wdt_dev, WATCHDOG_HEARTBEAT); - - dev_warn(&pdev->dev, - "heartbeat value must be 1<=x<=3600, using %d\n", - sh_wdt_dev.timeout); - } - - dev_info(&pdev->dev, "configured with heartbeat=%d sec (nowayout=%d)\n", - sh_wdt_dev.timeout, nowayout); - - rc = watchdog_register_device(&sh_wdt_dev); - if (unlikely(rc)) { - dev_err(&pdev->dev, "Can't register watchdog (err=%d)\n", rc); - return rc; - } - - timer_setup(&wdt->timer, sh_wdt_ping, 0); - wdt->timer.expires = next_ping_period(clock_division_ratio); - - dev_info(&pdev->dev, "initialized.\n"); - - pm_runtime_enable(&pdev->dev); - - return 0; -} - -static int sh_wdt_remove(struct platform_device *pdev) -{ - watchdog_unregister_device(&sh_wdt_dev); - - pm_runtime_disable(&pdev->dev); - - return 0; -} - -static void sh_wdt_shutdown(struct platform_device *pdev) -{ - sh_wdt_stop(&sh_wdt_dev); -} - -static struct platform_driver sh_wdt_driver = { - .driver = { - .name = DRV_NAME, - }, - - .probe = sh_wdt_probe, - .remove = sh_wdt_remove, - .shutdown = sh_wdt_shutdown, -}; - -static int __init sh_wdt_init(void) -{ - if (unlikely(clock_division_ratio < 0x5 || - clock_division_ratio > 0x7)) { - clock_division_ratio = WTCSR_CKS_4096; - - pr_info("divisor must be 0x5<=x<=0x7, using %d\n", - clock_division_ratio); - } - - return platform_driver_register(&sh_wdt_driver); -} - -static void __exit sh_wdt_exit(void) -{ - platform_driver_unregister(&sh_wdt_driver); -} -module_init(sh_wdt_init); -module_exit(sh_wdt_exit); - -MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); -MODULE_DESCRIPTION("SuperH watchdog driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRV_NAME); - -module_param(clock_division_ratio, int, 0); -MODULE_PARM_DESC(clock_division_ratio, - "Clock division ratio. Valid ranges are from 0x5 (1.31ms) " - "to 0x7 (5.25ms). (default=" __MODULE_STRING(WTCSR_CKS_4096) ")"); - -module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, - "Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=" - __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); - -module_param(nowayout, bool, 0); -MODULE_PARM_DESC(nowayout, - "Watchdog cannot be stopped once started (default=" - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
Now that arch/sh is removed this driver is dead code. Signed-off-by: Christoph Hellwig <hch@lst.de> --- .../watchdog/watchdog-parameters.rst | 12 - drivers/watchdog/Kconfig | 20 - drivers/watchdog/Makefile | 3 - drivers/watchdog/shwdt.c | 344 ------------------ 4 files changed, 379 deletions(-) delete mode 100644 drivers/watchdog/shwdt.c