| Message ID | 20230117030344.4581-396-nic_swsd@realtek.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 0d4cda805a183bbe523f2407edb5c14ade50b841 |
| Headers | show |
| Series | [net-next,v2] r8152: avoid to change cfg for all devices | expand |
On Tue, Jan 17, 2023 at 11:03:44AM +0800, Hayes Wang wrote: > The rtl8152_cfgselector_probe() should set the USB configuration to the > vendor mode only for the devices which the driver (r8152) supports. > Otherwise, no driver would be used for such devices. > > Fixes: ec51fbd1b8a2 ("r8152: add USB device driver for config selection") > Signed-off-by: Hayes Wang <hayeswang@realtek.com> > --- > v2: fix a typo for the comment. > > drivers/net/usb/r8152.c | 20 +++++++++++++++++--- > 1 file changed, 17 insertions(+), 3 deletions(-) Assuming that all the versions covered in rtl8152_get_version() support switching the device to vendor mode, then this looks good to me. Reviewed-by: Simon Horman <simon.horman@corigine.com>
Hello: This patch was applied to netdev/net-next.git (master) by David S. Miller <davem@davemloft.net>: On Tue, 17 Jan 2023 11:03:44 +0800 you wrote: > The rtl8152_cfgselector_probe() should set the USB configuration to the > vendor mode only for the devices which the driver (r8152) supports. > Otherwise, no driver would be used for such devices. > > Fixes: ec51fbd1b8a2 ("r8152: add USB device driver for config selection") > Signed-off-by: Hayes Wang <hayeswang@realtek.com> > > [...] Here is the summary with links: - [net-next,v2] r8152: avoid to change cfg for all devices https://git.kernel.org/netdev/net-next/c/0d4cda805a18 You are awesome, thank you!
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index a26d3127a4fe..4c5c1df5d7a4 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -9500,9 +9500,8 @@ static int rtl_fw_init(struct r8152 *tp) return 0; } -u8 rtl8152_get_version(struct usb_interface *intf) +static u8 __rtl_get_hw_ver(struct usb_device *udev) { - struct usb_device *udev = interface_to_usbdev(intf); u32 ocp_data = 0; __le32 *tmp; u8 version; @@ -9571,10 +9570,19 @@ u8 rtl8152_get_version(struct usb_interface *intf) break; default: version = RTL_VER_UNKNOWN; - dev_info(&intf->dev, "Unknown version 0x%04x\n", ocp_data); + dev_info(&udev->dev, "Unknown version 0x%04x\n", ocp_data); break; } + return version; +} + +u8 rtl8152_get_version(struct usb_interface *intf) +{ + u8 version; + + version = __rtl_get_hw_ver(interface_to_usbdev(intf)); + dev_dbg(&intf->dev, "Detected version 0x%04x\n", version); return version; @@ -9870,6 +9878,12 @@ static int rtl8152_cfgselector_probe(struct usb_device *udev) struct usb_host_config *c; int i, num_configs; + /* Switch the device to vendor mode, if and only if the vendor mode + * driver supports it. + */ + if (__rtl_get_hw_ver(udev) == RTL_VER_UNKNOWN) + return 0; + /* The vendor mode is not always config #1, so to find it out. */ c = udev->config; num_configs = udev->descriptor.bNumConfigurations;
The rtl8152_cfgselector_probe() should set the USB configuration to the vendor mode only for the devices which the driver (r8152) supports. Otherwise, no driver would be used for such devices. Fixes: ec51fbd1b8a2 ("r8152: add USB device driver for config selection") Signed-off-by: Hayes Wang <hayeswang@realtek.com> --- v2: fix a typo for the comment. drivers/net/usb/r8152.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-)