@@ -1209,11 +1209,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 test_mode = 0;
struct xhci_hub *rhub;
struct xhci_port **ports;
+ struct xhci_port *port;
+ int portnum1;
rhub = xhci_get_rhub(hcd);
ports = rhub->ports;
max_ports = rhub->num_ports;
bus_state = &rhub->bus_state;
+ portnum1 = wIndex & 0xff;
spin_lock_irqsave(&xhci->lock, flags);
switch (typeReq) {
@@ -1247,10 +1250,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
spin_unlock_irqrestore(&xhci->lock, flags);
return retval;
case GetPortStatus:
- if (!wIndex || wIndex > max_ports)
+ if (!portnum1 || portnum1 > max_ports)
goto error;
+
wIndex--;
- temp = readl(ports[wIndex]->addr);
+ port = ports[portnum1 - 1];
+ temp = readl(port->addr);
if (temp == ~(u32)0) {
xhci_hc_died(xhci);
retval = -ENODEV;
@@ -1263,7 +1268,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
goto error;
xhci_dbg(xhci, "Get port status %d-%d read: 0x%x, return 0x%x",
- hcd->self.busnum, wIndex + 1, temp, status);
+ hcd->self.busnum, portnum1, temp, status);
put_unaligned(cpu_to_le32(status), (__le32 *) buf);
/* if USB 3.1 extended port status return additional 4 bytes */
@@ -1275,7 +1280,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
retval = -EINVAL;
break;
}
- port_li = readl(ports[wIndex]->addr + PORTLI);
+ port_li = readl(port->addr + PORTLI);
status = xhci_get_ext_port_status(temp, port_li);
put_unaligned_le32(status, &buf[4]);
}
@@ -1289,11 +1294,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
test_mode = (wIndex & 0xff00) >> 8;
/* The MSB of wIndex is the U1/U2 timeout */
timeout = (wIndex & 0xff00) >> 8;
+
wIndex &= 0xff;
- if (!wIndex || wIndex > max_ports)
+ if (!portnum1 || portnum1 > max_ports)
goto error;
+
+ port = ports[portnum1 - 1];
wIndex--;
- temp = readl(ports[wIndex]->addr);
+ temp = readl(port->addr);
if (temp == ~(u32)0) {
xhci_hc_died(xhci);
retval = -ENODEV;
@@ -1303,11 +1311,10 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
/* FIXME: What new port features do we need to support? */
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
- temp = readl(ports[wIndex]->addr);
+ temp = readl(port->addr);
if ((temp & PORT_PLS_MASK) != XDEV_U0) {
/* Resume the port to U0 first */
- xhci_set_link_state(xhci, ports[wIndex],
- XDEV_U0);
+ xhci_set_link_state(xhci, port, XDEV_U0);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(10);
spin_lock_irqsave(&xhci->lock, flags);
@@ -1316,16 +1323,16 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
* a port unless the port reports that it is in the
* enabled (PED = ‘1’,PLS < ‘3’) state.
*/
- temp = readl(ports[wIndex]->addr);
+ temp = readl(port->addr);
if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
|| (temp & PORT_PLS_MASK) >= XDEV_U3) {
xhci_warn(xhci, "USB core suspending port %d-%d not in U0/U1/U2\n",
- hcd->self.busnum, wIndex + 1);
+ hcd->self.busnum, portnum1);
goto error;
}
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
- wIndex + 1);
+ portnum1);
if (!slot_id) {
xhci_warn(xhci, "slot_id is zero\n");
goto error;
@@ -1335,21 +1342,21 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
xhci_stop_device(xhci, slot_id, 1);
spin_lock_irqsave(&xhci->lock, flags);
- xhci_set_link_state(xhci, ports[wIndex], XDEV_U3);
+ xhci_set_link_state(xhci, port, XDEV_U3);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(10); /* wait device to enter */
spin_lock_irqsave(&xhci->lock, flags);
- temp = readl(ports[wIndex]->addr);
+ temp = readl(port->addr);
bus_state->suspended_ports |= 1 << wIndex;
break;
case USB_PORT_FEAT_LINK_STATE:
- temp = readl(ports[wIndex]->addr);
+ temp = readl(port->addr);
/* Disable port */
if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
xhci_dbg(xhci, "Disable port %d-%d\n",
- hcd->self.busnum, wIndex + 1);
+ hcd->self.busnum, portnum1);
temp = xhci_port_state_to_neutral(temp);
/*
* Clear all change bits, so that we get a new
@@ -1358,18 +1365,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
temp |= PORT_CSC | PORT_PEC | PORT_WRC |
PORT_OCC | PORT_RC | PORT_PLC |
PORT_CEC;
- writel(temp | PORT_PE, ports[wIndex]->addr);
- temp = readl(ports[wIndex]->addr);
+ writel(temp | PORT_PE, port->addr);
+ temp = readl(port->addr);
break;
}
/* Put link in RxDetect (enable port) */
if (link_state == USB_SS_PORT_LS_RX_DETECT) {
xhci_dbg(xhci, "Enable port %d-%d\n",
- hcd->self.busnum, wIndex + 1);
- xhci_set_link_state(xhci, ports[wIndex],
- link_state);
- temp = readl(ports[wIndex]->addr);
+ hcd->self.busnum, portnum1);
+ xhci_set_link_state(xhci, port, link_state);
+ temp = readl(port->addr);
break;
}
@@ -1399,11 +1405,10 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
}
xhci_dbg(xhci, "Enable compliance mode transition for port %d-%d\n",
- hcd->self.busnum, wIndex + 1);
- xhci_set_link_state(xhci, ports[wIndex],
- link_state);
+ hcd->self.busnum, portnum1);
+ xhci_set_link_state(xhci, port, link_state);
- temp = readl(ports[wIndex]->addr);
+ temp = readl(port->addr);
break;
}
/* Port must be enabled */
@@ -1414,8 +1419,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
/* Can't set port link state above '3' (U3) */
if (link_state > USB_SS_PORT_LS_U3) {
xhci_warn(xhci, "Cannot set port %d-%d link state %d\n",
- hcd->self.busnum, wIndex + 1,
- link_state);
+ hcd->self.busnum, portnum1, link_state);
goto error;
}
@@ -1440,8 +1444,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
reinit_completion(&bus_state->u3exit_done[wIndex]);
}
if (pls <= XDEV_U3) /* U1, U2, U3 */
- xhci_set_link_state(xhci, ports[wIndex],
- USB_SS_PORT_LS_U0);
+ xhci_set_link_state(xhci, port, USB_SS_PORT_LS_U0);
if (!wait_u0) {
if (pls > XDEV_U3)
goto error;
@@ -1451,16 +1454,16 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
if (!wait_for_completion_timeout(&bus_state->u3exit_done[wIndex],
msecs_to_jiffies(500)))
xhci_dbg(xhci, "missing U0 port change event for port %d-%d\n",
- hcd->self.busnum, wIndex + 1);
+ hcd->self.busnum, portnum1);
spin_lock_irqsave(&xhci->lock, flags);
- temp = readl(ports[wIndex]->addr);
+ temp = readl(port->addr);
break;
}
if (link_state == USB_SS_PORT_LS_U3) {
int retries = 16;
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
- wIndex + 1);
+ portnum1);
if (slot_id) {
/* unlock to execute stop endpoint
* commands */
@@ -1469,16 +1472,16 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
xhci_stop_device(xhci, slot_id, 1);
spin_lock_irqsave(&xhci->lock, flags);
}
- xhci_set_link_state(xhci, ports[wIndex], USB_SS_PORT_LS_U3);
+ xhci_set_link_state(xhci, port, USB_SS_PORT_LS_U3);
spin_unlock_irqrestore(&xhci->lock, flags);
while (retries--) {
usleep_range(4000, 8000);
- temp = readl(ports[wIndex]->addr);
+ temp = readl(port->addr);
if ((temp & PORT_PLS_MASK) == XDEV_U3)
break;
}
spin_lock_irqsave(&xhci->lock, flags);
- temp = readl(ports[wIndex]->addr);
+ temp = readl(port->addr);
bus_state->suspended_ports |= 1 << wIndex;
}
break;
@@ -1493,39 +1496,38 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
break;
case USB_PORT_FEAT_RESET:
temp = (temp | PORT_RESET);
- writel(temp, ports[wIndex]->addr);
+ writel(temp, port->addr);
- temp = readl(ports[wIndex]->addr);
+ temp = readl(port->addr);
xhci_dbg(xhci, "set port reset, actual port %d-%d status = 0x%x\n",
- hcd->self.busnum, wIndex + 1, temp);
+ hcd->self.busnum, portnum1, temp);
break;
case USB_PORT_FEAT_REMOTE_WAKE_MASK:
- xhci_set_remote_wake_mask(xhci, ports[wIndex],
- wake_mask);
- temp = readl(ports[wIndex]->addr);
+ xhci_set_remote_wake_mask(xhci, port, wake_mask);
+ temp = readl(port->addr);
xhci_dbg(xhci, "set port remote wake mask, actual port %d-%d status = 0x%x\n",
- hcd->self.busnum, wIndex + 1, temp);
+ hcd->self.busnum, portnum1, temp);
break;
case USB_PORT_FEAT_BH_PORT_RESET:
temp |= PORT_WR;
- writel(temp, ports[wIndex]->addr);
- temp = readl(ports[wIndex]->addr);
+ writel(temp, port->addr);
+ temp = readl(port->addr);
break;
case USB_PORT_FEAT_U1_TIMEOUT:
if (hcd->speed < HCD_USB3)
goto error;
- temp = readl(ports[wIndex]->addr + PORTPMSC);
+ temp = readl(port->addr + PORTPMSC);
temp &= ~PORT_U1_TIMEOUT_MASK;
temp |= PORT_U1_TIMEOUT(timeout);
- writel(temp, ports[wIndex]->addr + PORTPMSC);
+ writel(temp, port->addr + PORTPMSC);
break;
case USB_PORT_FEAT_U2_TIMEOUT:
if (hcd->speed < HCD_USB3)
goto error;
- temp = readl(ports[wIndex]->addr + PORTPMSC);
+ temp = readl(port->addr + PORTPMSC);
temp &= ~PORT_U2_TIMEOUT_MASK;
temp |= PORT_U2_TIMEOUT(timeout);
- writel(temp, ports[wIndex]->addr + PORTPMSC);
+ writel(temp, port->addr + PORTPMSC);
break;
case USB_PORT_FEAT_TEST:
/* 4.19.6 Port Test Modes (USB2 Test Mode) */
@@ -1541,13 +1543,16 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
goto error;
}
/* unblock any posted writes */
- temp = readl(ports[wIndex]->addr);
+ temp = readl(port->addr);
break;
case ClearPortFeature:
- if (!wIndex || wIndex > max_ports)
+ if (!portnum1 || portnum1 > max_ports)
goto error;
+
+ port = ports[portnum1 - 1];
+
wIndex--;
- temp = readl(ports[wIndex]->addr);
+ temp = readl(port->addr);
if (temp == ~(u32)0) {
xhci_hc_died(xhci);
retval = -ENODEV;
@@ -1557,7 +1562,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
temp = xhci_port_state_to_neutral(temp);
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
- temp = readl(ports[wIndex]->addr);
+ temp = readl(port->addr);
xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
xhci_dbg(xhci, "PORTSC %04x\n", temp);
if (temp & PORT_RESET)
@@ -1568,20 +1573,18 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
set_bit(wIndex, &bus_state->resuming_ports);
usb_hcd_start_port_resume(&hcd->self, wIndex);
- xhci_set_link_state(xhci, ports[wIndex],
- XDEV_RESUME);
+ xhci_set_link_state(xhci, port, XDEV_RESUME);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(USB_RESUME_TIMEOUT);
spin_lock_irqsave(&xhci->lock, flags);
- xhci_set_link_state(xhci, ports[wIndex],
- XDEV_U0);
+ xhci_set_link_state(xhci, port, XDEV_U0);
clear_bit(wIndex, &bus_state->resuming_ports);
usb_hcd_end_port_resume(&hcd->self, wIndex);
}
bus_state->port_c_suspend |= 1 << wIndex;
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
- wIndex + 1);
+ portnum1);
if (!slot_id) {
xhci_dbg(xhci, "slot_id is zero\n");
goto error;
@@ -1599,11 +1602,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
case USB_PORT_FEAT_C_PORT_LINK_STATE:
case USB_PORT_FEAT_C_PORT_CONFIG_ERROR:
xhci_clear_port_change_bit(xhci, wValue, wIndex,
- ports[wIndex]->addr, temp);
+ port->addr, temp);
break;
case USB_PORT_FEAT_ENABLE:
xhci_disable_port(hcd, xhci, wIndex,
- ports[wIndex]->addr, temp);
+ port->addr, temp);
break;
case USB_PORT_FEAT_POWER:
xhci_set_port_power(xhci, hcd, wIndex, false, &flags);
Both port number and port structure of a port are referred to several times when handing hub requests in xhci. Use more suitable data types and readable names for these. Cleanup only, no functional changes Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> --- drivers/usb/host/xhci-hub.c | 123 ++++++++++++++++++------------------ 1 file changed, 63 insertions(+), 60 deletions(-)