diff mbox series

[RFC,1/2] usb: dwc3: gadget: Bail out in pullup if soft reset timeout happens

Message ID 20230322092740.28491-2-quic_kriskura@quicinc.com (mailing list archive)
State New, archived
Headers show
Series Handle core soft reset during Pullup | expand

Commit Message

Krishna Kurapati March 22, 2023, 9:27 a.m. UTC
If the core soft reset timeout happens, avoid setting up event
buffers and starting gadget as the writes to these registers
may not reflect when in reset and setting the run stop bit
can lead the controller to access wrong event buffer address
resulting in a crash.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
---
 drivers/usb/dwc3/gadget.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 3c63fa97a680..f0472801d9a5 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2620,13 +2620,16 @@  static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 		 * device-initiated disconnect requires a core soft reset
 		 * (DCTL.CSftRst) before enabling the run/stop bit.
 		 */
-		dwc3_core_soft_reset(dwc);
+		ret = dwc3_core_soft_reset(dwc);
+		if (ret)
+			goto done;
 
 		dwc3_event_buffers_setup(dwc);
 		__dwc3_gadget_start(dwc);
 		ret = dwc3_gadget_run_stop(dwc, true, false);
 	}
 
+done:
 	pm_runtime_put(dwc->dev);
 
 	return ret;