From patchwork Thu Apr 6 01:52:13 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Minda Chen X-Patchwork-Id: 13202780 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E7EF6C761A6 for ; Thu, 6 Apr 2023 01:52:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234651AbjDFBwg (ORCPT ); Wed, 5 Apr 2023 21:52:36 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50900 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233641AbjDFBw2 (ORCPT ); Wed, 5 Apr 2023 21:52:28 -0400 Received: from ex01.ufhost.com (ex01.ufhost.com [61.152.239.75]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3A7427ABA; Wed, 5 Apr 2023 18:52:26 -0700 (PDT) Received: from EXMBX166.cuchost.com (unknown [175.102.18.54]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "EXMBX166", Issuer "EXMBX166" (not verified)) by ex01.ufhost.com (Postfix) with ESMTP id 709D324E211; Thu, 6 Apr 2023 09:52:23 +0800 (CST) Received: from EXMBX171.cuchost.com (172.16.6.91) by EXMBX166.cuchost.com (172.16.6.76) with Microsoft SMTP Server (TLS) id 15.0.1497.42; Thu, 6 Apr 2023 09:52:23 +0800 Received: from ubuntu.localdomain (183.27.97.179) by EXMBX171.cuchost.com (172.16.6.91) with Microsoft SMTP Server (TLS) id 15.0.1497.42; Thu, 6 Apr 2023 09:52:22 +0800 From: Minda Chen To: Emil Renner Berthing , Conor Dooley , Vinod Koul , Kishon Vijay Abraham I , Rob Herring , Krzysztof Kozlowski , Pawel Laszczak , Greg Kroah-Hartman , Peter Chen , Roger Quadros , Philipp Zabel CC: , , , , , Paul Walmsley , Palmer Dabbelt , Albert Ou , "Minda Chen" , Mason Huo Subject: [PATCH v4 4/7] phy: starfive: add JH7110 PCIE 2.0 PHY driver. Date: Thu, 6 Apr 2023 09:52:13 +0800 Message-ID: <20230406015216.27034-5-minda.chen@starfivetech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20230406015216.27034-1-minda.chen@starfivetech.com> References: <20230406015216.27034-1-minda.chen@starfivetech.com> MIME-Version: 1.0 X-Originating-IP: [183.27.97.179] X-ClientProxiedBy: EXCAS066.cuchost.com (172.16.6.26) To EXMBX171.cuchost.com (172.16.6.91) X-YovoleRuleAgent: yovoleflag Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Add Starfive JH7110 SoC PCIe 2.0 driver support. PCIe 2.0 PHY default connect to PCIe controller. But pcie0 PHY can connect to USB 3.0 controlller. Signed-off-by: Minda Chen --- MAINTAINERS | 4 +- drivers/phy/starfive/Kconfig | 11 ++ drivers/phy/starfive/Makefile | 1 + drivers/phy/starfive/phy-jh7110-pcie.c | 197 +++++++++++++++++++++++++ 4 files changed, 212 insertions(+), 1 deletion(-) create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c diff --git a/MAINTAINERS b/MAINTAINERS index 9da352084403..d98b70d62fd4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19968,11 +19968,13 @@ M: William Qiu S: Supported F: Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml -STARFIVE JH71X0 USB PHY DRIVER +STARFIVE JH71X0 PCIE AND USB PHY DRIVER M: Emil Renner Berthing M: Minda Chen S: Supported +F: Documentation/devicetree/bindings/phy/starfive,jh7110-pcie-phy.yaml F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml +F: drivers/phy/starfive/phy-jh7110-pcie.c F: drivers/phy/starfive/phy-jh7110-usb.c STATIC BRANCH/CALL diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig index 2c013c390dee..c21c21d284a6 100644 --- a/drivers/phy/starfive/Kconfig +++ b/drivers/phy/starfive/Kconfig @@ -12,6 +12,17 @@ config PHY_STARFIVE_DPHY_RX system. If M is selected, the module will be called phy-starfive-dphy-rx. +config PHY_STARFIVE_JH7110_PCIE + tristate "Starfive JH7110 PCIE 2.0/USB 3.0 PHY support" + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + help + Enable this to support the StarFive PCIe 2.0 PHY, + or used as USB 3.0 PHY. + If M is selected, the module will be called + phy-jh7110-pcie.ko. + config PHY_STARFIVE_JH7110_USB tristate "Starfive JH7110 USB 2.0 PHY support" depends on USB_SUPPORT diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile index 176443852f4d..03a55aad53a2 100644 --- a/drivers/phy/starfive/Makefile +++ b/drivers/phy/starfive/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_PHY_STARFIVE_DPHY_RX) += phy-starfive-dphy-rx.o +obj-$(CONFIG_PHY_STARFIVE_JH7110_PCIE) += phy-jh7110-pcie.o obj-$(CONFIG_PHY_STARFIVE_JH7110_USB) += phy-jh7110-usb.o diff --git a/drivers/phy/starfive/phy-jh7110-pcie.c b/drivers/phy/starfive/phy-jh7110-pcie.c new file mode 100644 index 000000000000..725815aabe74 --- /dev/null +++ b/drivers/phy/starfive/phy-jh7110-pcie.c @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * StarFive JH7110 PCIe 2.0 PHY driver + * + * Copyright (C) 2023 Minda Chen + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PCIE_KVCO_LEVEL_OFF (0x28) +#define PCIE_USB3_PHY_PLL_CTL_OFF (0x7c) +#define PCIE_KVCO_TUNE_SIGNAL_OFF (0x80) +#define PCIE_USB3_PHY_ENABLE BIT(4) +#define PHY_KVCO_FINE_TUNE_LEVEL 0x91 +#define PHY_KVCO_FINE_TUNE_SIGNALS 0xc + +#define USB_PDRSTN_SPLIT BIT(17) + +#define PCIE_CKREF_SRC_MASK GENMASK(19, 18) +#define PCIE_CLK_SEL_MASK GENMASK(21, 20) +#define PCIE_PHY_MODE BIT(20) +#define PCIE_PHY_MODE_MASK GENMASK(21, 20) +#define PCIE_USB3_BUS_WIDTH_MASK GENMASK(3, 2) +#define PCIE_USB3_RATE_MASK GENMASK(6, 5) +#define PCIE_USB3_RX_STANDBY_MASK BIT(7) +#define PCIE_USB3_PHY_ENABLE BIT(4) + +struct jh7110_pcie_phy { + struct phy *phy; + struct regmap *stg_syscon; + struct regmap *sys_syscon; + void __iomem *regs; + u32 sys_phy_connect; + u32 stg_pcie_mode; + u32 stg_pcie_usb; + enum phy_mode mode; +}; + +static int jh7110_usb3_mode_set(struct jh7110_pcie_phy *data) +{ + if (!data->stg_syscon || !data->sys_syscon) { + dev_info(&data->phy->dev, "don't support usb3 mode\n"); + return -EINVAL; + } + + regmap_update_bits(data->stg_syscon, data->stg_pcie_mode, + PCIE_PHY_MODE_MASK, PCIE_PHY_MODE); + regmap_update_bits(data->stg_syscon, data->stg_pcie_usb, + PCIE_USB3_BUS_WIDTH_MASK, 0); + regmap_update_bits(data->stg_syscon, data->stg_pcie_usb, + PCIE_USB3_RATE_MASK, 0); + regmap_update_bits(data->stg_syscon, data->stg_pcie_usb, + PCIE_USB3_RX_STANDBY_MASK, 0); + regmap_update_bits(data->stg_syscon, data->stg_pcie_usb, + PCIE_USB3_PHY_ENABLE, PCIE_USB3_PHY_ENABLE); + + /* Connect usb 3.0 phy mode */ + regmap_update_bits(data->sys_syscon, data->sys_phy_connect, + USB_PDRSTN_SPLIT, 0); + + /* Configuare spread-spectrum mode: down-spread-spectrum */ + writel(PCIE_USB3_PHY_ENABLE, data->regs + PCIE_USB3_PHY_PLL_CTL_OFF); + + return 0; +} + +static void jh7110_pcie_mode_set(struct jh7110_pcie_phy *phy) +{ + /* PCIe Multi-PHY PLL KVCO Gain fine tune settings: */ + writel(PHY_KVCO_FINE_TUNE_LEVEL, phy->regs + PCIE_KVCO_LEVEL_OFF); + writel(PHY_KVCO_FINE_TUNE_SIGNALS, phy->regs + PCIE_KVCO_TUNE_SIGNAL_OFF); +} + +static int jh7110_pcie_phy_set_mode(struct phy *_phy, + enum phy_mode mode, int submode) +{ + struct jh7110_pcie_phy *phy = phy_get_drvdata(_phy); + int ret; + + if (mode != phy->mode) { + switch (mode) { + case PHY_MODE_USB_HOST: + case PHY_MODE_USB_DEVICE: + case PHY_MODE_USB_OTG: + ret = jh7110_usb3_mode_set(phy); + if (ret) + return ret; + break; + case PHY_MODE_PCIE: + jh7110_pcie_mode_set(phy); + break; + default: + return -EINVAL; + } + + dev_info(&_phy->dev, "Changing phy mode to %d\n", mode); + phy->mode = mode; + } + + return 0; +} + +static int jh7110_pcie_phy_init(struct phy *_phy) +{ + return 0; +} + +static int jh7110_pcie_phy_exit(struct phy *_phy) +{ + return 0; +} + +static const struct phy_ops jh7110_pcie_phy_ops = { + .init = jh7110_pcie_phy_init, + .exit = jh7110_pcie_phy_exit, + .set_mode = jh7110_pcie_phy_set_mode, + .owner = THIS_MODULE, +}; + +static int jh7110_pcie_phy_probe(struct platform_device *pdev) +{ + struct jh7110_pcie_phy *phy; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + u32 args[3]; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy->regs)) + return PTR_ERR(phy->regs); + + phy->phy = devm_phy_create(dev, NULL, &jh7110_pcie_phy_ops); + if (IS_ERR(phy->phy)) + return dev_err_probe(dev, PTR_ERR(phy->regs), + "Failed to map phy base\n"); + + phy->sys_syscon = syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node, + "starfive,sys-syscon", 1, args); + + if (!IS_ERR_OR_NULL(phy->sys_syscon)) + phy->sys_phy_connect = args[0]; + else + phy->sys_syscon = NULL; + + phy->stg_syscon = syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node, + "starfive,stg-syscon", 2, args); + + if (!IS_ERR_OR_NULL(phy->stg_syscon)) { + phy->stg_pcie_mode = args[0]; + phy->stg_pcie_usb = args[1]; + } else + phy->stg_syscon = NULL; + + platform_set_drvdata(pdev, phy); + phy_set_drvdata(phy->phy, phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static int jh7110_pcie_phy_remove(struct platform_device *pdev) +{ + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static const struct of_device_id jh7110_pcie_phy_of_match[] = { + { .compatible = "starfive,jh7110-pcie-phy" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, jh7110_pcie_phy_of_match); + +static struct platform_driver jh7110_pcie_phy_driver = { + .probe = jh7110_pcie_phy_probe, + .remove = jh7110_pcie_phy_remove, + .driver = { + .of_match_table = jh7110_pcie_phy_of_match, + .name = "jh7110-pcie-phy", + } +}; +module_platform_driver(jh7110_pcie_phy_driver); + +MODULE_DESCRIPTION("StarFive JH7110 PCIe 2.0 PHY driver"); +MODULE_AUTHOR("Minda Chen "); +MODULE_LICENSE("GPL");