diff mbox series

[3/3] xhci: Show zhaoxin xHCI root hub speed correctly

Message ID 20230420172130.375819-4-WeitaoWang-oc@zhaoxin.com (mailing list archive)
State Superseded
Headers show
Series Fix some issues of xHCI for zhaoxin | expand

Commit Message

Weitao Wang April 20, 2023, 5:21 p.m. UTC 
Some zhaoxin xHCI controllers follow usb3.1 spec,
but only support gen1 speed 5G. While in Linux kernel,
if xHCI suspport usb3.1,root hub speed will show on 10G.
To fix this issue of zhaoxin xHCI platforms, read usb speed ID
supported by xHCI to determine root hub speed.

Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
---
 drivers/usb/host/xhci.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
diff mbox series

Patch

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 730c0f68518d..60b17799aa88 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -5317,6 +5317,7 @@  static void xhci_hcd_init_usb2_data(struct xhci_hcd *xhci, struct usb_hcd *hcd)
 static void xhci_hcd_init_usb3_data(struct xhci_hcd *xhci, struct usb_hcd *hcd)
 {
 	unsigned int minor_rev;
+	unsigned int i, j;
 
 	/*
 	 * Early xHCI 1.1 spec did not mention USB 3.1 capable hosts
@@ -5346,6 +5347,27 @@  static void xhci_hcd_init_usb3_data(struct xhci_hcd *xhci, struct usb_hcd *hcd)
 		hcd->self.root_hub->ssp_rate = USB_SSP_GEN_2x1;
 		break;
 	}
+
+	/* Usb3.1 has gen1 and gen2, Some zhaoxin's xHCI controller
+	 * that follow usb3.1 spec but only support gen1.
+	 */
+	if (xhci->quirks & XHCI_ZHAOXIN_HOST) {
+		minor_rev = 0;
+		for (j = 0; j < xhci->num_port_caps; j++) {
+			for (i = 0; i < xhci->port_caps[j].psi_count; i++) {
+				if (XHCI_EXT_PORT_PSIV(xhci->port_caps[j].psi[i]) >= 5) {
+					minor_rev = 1;
+					break;
+				}
+			}
+			if (minor_rev)
+				break;
+		}
+		if (minor_rev != 1) {
+			hcd->speed = HCD_USB3;
+			hcd->self.root_hub->speed = USB_SPEED_SUPER;
+		}
+	}
 	xhci_info(xhci, "Host supports USB 3.%x %sSuperSpeed\n",
 		  minor_rev, minor_rev ? "Enhanced " : "");