diff mbox series

[v5] usb: gadget: u_ether: Fix host MAC address case

Message ID 20230505143640.443014-1-k.graefe@gateware.de (mailing list archive)
State Accepted
Commit 3c0f4f09c063e143822393d99cb2b19a85451c07
Headers show
Series [v5] usb: gadget: u_ether: Fix host MAC address case | expand

Commit Message

Konrad Gräfe May 5, 2023, 2:36 p.m. UTC
The CDC-ECM specification [1] requires to send the host MAC address as
an uppercase hexadecimal string in chapter "5.4 Ethernet Networking
Functional Descriptor":
    The Unicode character is chosen from the set of values 30h through
    39h and 41h through 46h (0-9 and A-F).

However, snprintf(.., "%pm", ..) generates a lowercase MAC address
string. While most host drivers are tolerant to this, UsbNcm.sys on
Windows 10 is not. Instead it uses a different MAC address with all
bytes set to zero including and after the first byte containing a
lowercase letter. On Windows 11 Microsoft fixed it, but apparently they
did not backport the fix.

This change fixes the issue by upper-casing the MAC to comply with the
specification.

[1]: https://www.usb.org/document-library/class-definitions-communication-devices-12, file ECM120.pdf

Fixes: bcd4a1c40bee ("usb: gadget: u_ether: construct with default values and add setters/getters")
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Gräfe <k.graefe@gateware.de>
---
Changes since v4:
* Use string_upper() instead of a special format string

Changes since v3: None

Changes since v2:
* Add uppercase MAC address format string and use that instead of
  manually uppercasing the resulting MAC address string.

Changes since v1:
* Fixed checkpatch.pl warnings

 drivers/usb/gadget/function/u_ether.c | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 6956ad8ba8dd..a366abb45623 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -17,6 +17,7 @@ 
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
+#include <linux/string_helpers.h>
 #include <linux/usb/composite.h>
 
 #include "u_ether.h"
@@ -965,6 +966,8 @@  int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len)
 	dev = netdev_priv(net);
 	snprintf(host_addr, len, "%pm", dev->host_mac);
 
+	string_upper(host_addr, host_addr);
+
 	return strlen(host_addr);
 }
 EXPORT_SYMBOL_GPL(gether_get_host_addr_cdc);