| Message ID | 20230614111548.1815146-2-xu.yang_2@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] dt-bindings: phy: fsl,mxs-usbphy: add fsl,hold-line-without-vbus property | expand |
On 14/06/2023 13:15, Xu Yang wrote: > Whether the data line is disconnected when vbus is not present is related > to whether the platform data set MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS > flag. This will provide a override from dts node if the user want to hold > the data line when vbus is not present. > > Signed-off-by: Xu Yang <xu.yang_2@nxp.com> > --- > drivers/usb/phy/phy-mxs-usb.c | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c > index e1a2b2ea098b..036bb58a3a71 100644 > --- a/drivers/usb/phy/phy-mxs-usb.c > +++ b/drivers/usb/phy/phy-mxs-usb.c > @@ -199,7 +199,7 @@ MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); > struct mxs_phy { > struct usb_phy phy; > struct clk *clk; > - const struct mxs_phy_data *data; > + struct mxs_phy_data *data; > struct regmap *regmap_anatop; > int port_id; > u32 tx_reg_set; > @@ -774,6 +774,11 @@ static int mxs_phy_probe(struct platform_device *pdev) > mxs_phy->tx_reg_set |= GM_USBPHY_TX_D_CAL(val); > } > > + mxs_phy->data = (struct mxs_phy_data *)of_device_get_match_data(&pdev->dev); > + > + if (of_property_present(np, "fsl,hold-line-without-vbus")) > + mxs_phy->data->flags &= ~MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS; How did you test it? What type of memory are you modifying? Best regards, Krzysztof
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index e1a2b2ea098b..036bb58a3a71 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -199,7 +199,7 @@ MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); struct mxs_phy { struct usb_phy phy; struct clk *clk; - const struct mxs_phy_data *data; + struct mxs_phy_data *data; struct regmap *regmap_anatop; int port_id; u32 tx_reg_set; @@ -774,6 +774,11 @@ static int mxs_phy_probe(struct platform_device *pdev) mxs_phy->tx_reg_set |= GM_USBPHY_TX_D_CAL(val); } + mxs_phy->data = (struct mxs_phy_data *)of_device_get_match_data(&pdev->dev); + + if (of_property_present(np, "fsl,hold-line-without-vbus")) + mxs_phy->data->flags &= ~MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS; + ret = of_alias_get_id(np, "usbphy"); if (ret < 0) dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret); @@ -792,7 +797,6 @@ static int mxs_phy_probe(struct platform_device *pdev) mxs_phy->phy.charger_detect = mxs_phy_charger_detect; mxs_phy->clk = clk; - mxs_phy->data = of_device_get_match_data(&pdev->dev); platform_set_drvdata(pdev, mxs_phy);
Whether the data line is disconnected when vbus is not present is related to whether the platform data set MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS flag. This will provide a override from dts node if the user want to hold the data line when vbus is not present. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> --- drivers/usb/phy/phy-mxs-usb.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)