| Message ID | 20230802090642.1642-1-zhuyinbo@loongson.cn (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | usb: xhci-plat: fix usb disconnect issue after s4 | expand |
On Wed, Aug 02, 2023 at 05:06:42PM +0800, Yinbo Zhu wrote: > The xhci retaining bogus hardware states cause usb disconnect devices > connected before hibernation(s4) and refer to the commit '547d55fa83 > ("usb: ohci-platform: fix usb disconnect issue after s4")' which set > flag "hibernated" as true when resume-from-hibernation and that the > drivers will reset the hardware to get rid of any existing state and > make sure resume from hibernation re-enumerates everything for xhci. > > Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> > --- > drivers/usb/host/xhci-plat.c | 21 ++++++++++++++++++--- > 1 file changed, 18 insertions(+), 3 deletions(-) What commit id does this fix? Should it go to stable kernels? thanks, greg k-h
在 2023/8/2 下午5:39, Greg Kroah-Hartman 写道: > On Wed, Aug 02, 2023 at 05:06:42PM +0800, Yinbo Zhu wrote: >> The xhci retaining bogus hardware states cause usb disconnect devices >> connected before hibernation(s4) and refer to the commit '547d55fa83 >> ("usb: ohci-platform: fix usb disconnect issue after s4")' which set >> flag "hibernated" as true when resume-from-hibernation and that the >> drivers will reset the hardware to get rid of any existing state and >> make sure resume from hibernation re-enumerates everything for xhci. >> >> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> >> --- >> drivers/usb/host/xhci-plat.c | 21 ++++++++++++++++++--- >> 1 file changed, 18 insertions(+), 3 deletions(-) > > What commit id does this fix? > > Should it go to stable kernels? Sorry, perhaps it has been rebased, that tree was mainline tree next branch, you can find this commit id "f3d478858bec4" Thanks, Yinbo
On Wed, Aug 02, 2023 at 05:58:17PM +0800, Yinbo Zhu wrote: > > > 在 2023/8/2 下午5:39, Greg Kroah-Hartman 写道: > > On Wed, Aug 02, 2023 at 05:06:42PM +0800, Yinbo Zhu wrote: > > > The xhci retaining bogus hardware states cause usb disconnect devices > > > connected before hibernation(s4) and refer to the commit '547d55fa83 > > > ("usb: ohci-platform: fix usb disconnect issue after s4")' which set > > > flag "hibernated" as true when resume-from-hibernation and that the > > > drivers will reset the hardware to get rid of any existing state and > > > make sure resume from hibernation re-enumerates everything for xhci. > > > > > > Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> > > > --- > > > drivers/usb/host/xhci-plat.c | 21 ++++++++++++++++++--- > > > 1 file changed, 18 insertions(+), 3 deletions(-) > > > > What commit id does this fix? > > > > Should it go to stable kernels? > > > Sorry, perhaps it has been rebased, that tree was mainline tree next > branch, you can find this commit id "f3d478858bec4" Please fix this up and add a proper Fixes: line and if needed a cc: stable line. thanks, greg k-h
在 2023/8/2 下午6:06, Greg Kroah-Hartman 写道: > On Wed, Aug 02, 2023 at 05:58:17PM +0800, Yinbo Zhu wrote: >> >> >> 在 2023/8/2 下午5:39, Greg Kroah-Hartman 写道: >>> On Wed, Aug 02, 2023 at 05:06:42PM +0800, Yinbo Zhu wrote: >>>> The xhci retaining bogus hardware states cause usb disconnect devices >>>> connected before hibernation(s4) and refer to the commit '547d55fa83 >>>> ("usb: ohci-platform: fix usb disconnect issue after s4")' which set >>>> flag "hibernated" as true when resume-from-hibernation and that the >>>> drivers will reset the hardware to get rid of any existing state and >>>> make sure resume from hibernation re-enumerates everything for xhci. >>>> >>>> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> >>>> --- >>>> drivers/usb/host/xhci-plat.c | 21 ++++++++++++++++++--- >>>> 1 file changed, 18 insertions(+), 3 deletions(-) >>> >>> What commit id does this fix? >>> >>> Should it go to stable kernels? >> >> >> Sorry, perhaps it has been rebased, that tree was mainline tree next >> branch, you can find this commit id "f3d478858bec4" > > Please fix this up and add a proper Fixes: line and if needed a cc: > stable line. Sorry, I don't quite understand what you mean. Thanks, Yinbo.
在 2023/8/2 下午6:06, Greg Kroah-Hartman 写道: > On Wed, Aug 02, 2023 at 05:58:17PM +0800, Yinbo Zhu wrote: >> >> >> 在 2023/8/2 下午5:39, Greg Kroah-Hartman 写道: >>> On Wed, Aug 02, 2023 at 05:06:42PM +0800, Yinbo Zhu wrote: >>>> The xhci retaining bogus hardware states cause usb disconnect devices >>>> connected before hibernation(s4) and refer to the commit '547d55fa83 >>>> ("usb: ohci-platform: fix usb disconnect issue after s4")' which set >>>> flag "hibernated" as true when resume-from-hibernation and that the >>>> drivers will reset the hardware to get rid of any existing state and >>>> make sure resume from hibernation re-enumerates everything for xhci. >>>> >>>> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> >>>> --- >>>> drivers/usb/host/xhci-plat.c | 21 ++++++++++++++++++--- >>>> 1 file changed, 18 insertions(+), 3 deletions(-) >>> >>> What commit id does this fix? Sorry, I misunderstood your meaning earlier. This patch is not meant to fix the bugs in the previous commit id. Actually, it was to fix xhci issue that refer to repair of ohci (commit id "f3d478858bec4"). >>> >>> Should it go to stable kernels? Do I need to add Cc about stable kernel for the above situation? Thanks, Yinbo
Hi Yinbo, kernel test robot noticed the following build errors: [auto build test ERROR on usb/usb-testing] [also build test ERROR on usb/usb-next usb/usb-linus linus/master v6.5-rc5 next-20230808] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Yinbo-Zhu/usb-xhci-plat-fix-usb-disconnect-issue-after-s4/20230802-170845 base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing patch link: https://lore.kernel.org/r/20230802090642.1642-1-zhuyinbo%40loongson.cn patch subject: [PATCH] usb: xhci-plat: fix usb disconnect issue after s4 config: xtensa-randconfig-r093-20230808 (https://download.01.org/0day-ci/archive/20230809/202308090755.GOjEaQQg-lkp@intel.com/config) compiler: xtensa-linux-gcc (GCC) 12.3.0 reproduce: (https://download.01.org/0day-ci/archive/20230809/202308090755.GOjEaQQg-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202308090755.GOjEaQQg-lkp@intel.com/ All errors (new ones prefixed by >>, old ones prefixed by <<): WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-mediatek.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-samsung.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/backlight/platform_lcd.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/goldfishfb.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/imx/clk-imxrt1050.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-mm.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-img.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-vdec.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-venc.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-mfg.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-aud.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712-apmixedsys.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712-bdp.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712-img.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712-vdec.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712-venc.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt7622-eth.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt7622-hif.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt7622-aud.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt7986-apmixed.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt7986-topckgen.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8183-audio.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8183-cam.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8183-vdec.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-img.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-ipe.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-mfg.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-vdec.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-wpe.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-aud.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-cam.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-imp_iic_wrap.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-mdp.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-mm.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-msdc.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-scp_adsp.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-vdec.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8365-apmixedsys.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8365.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8365-apu.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8365-cam.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8365-vdec.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8365-venc.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/clk_test.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/clk-gate_test.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/qcom/hdma.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/imx/soc-imx8m.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/ixp4xx/ixp4xx-qmgr.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/mediatek/mtk-cmdq-helper.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/amlogic/meson-clk-measure.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/regulator/tps6286x-regulator.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/tty/serial/8250/8250_base.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/tty/serial/8250/serial_cs.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/tty/serial/owl-uart.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/tty/goldfish.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/ttyprintk.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/hw_random/omap-rng.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/hw_random/omap3-rom-rng.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/hw_random/nomadik-rng.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/hw_random/st-rng.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-kunit.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-ram.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-raw-ram.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-w1.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/block/brd.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/block/loop.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mfd/qcom-pm8008.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dax/dax.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/host/xhci-pci-renesas.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/storage/uas.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_acm.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_mass_storage.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_fs.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_hid.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/mon/usbmon.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/i2c/busses/i2c-pxa.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/tuners/tda9887.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/leds/flash/leds-rt4505.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/goldfish/goldfish_pipe.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/chrome/cros_kunit.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mailbox/mtk-cmdq-mailbox.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/devfreq/governor_performance.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/devfreq/governor_userspace.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iio/adc/ingenic-adc.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwtracing/intel_th/intel_th_msu_sink.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem_brcm_nvram.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem_u-boot-env.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/interconnect/imx/imx8mn-interconnect.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/parsers/brcm_u-boot.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/parsers/tplink_safeloader.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/chips/cfi_util.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/maps/map_funcs.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-core.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-hub.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-gpio.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-ast-cf.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-scom.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/siox/siox-bus-gpio.o >> ERROR: modpost: "xhci_suspend" [drivers/usb/host/xhci-plat-hcd.ko] undefined! >> ERROR: modpost: "xhci_resume" [drivers/usb/host/xhci-plat-hcd.ko] undefined!
在 2023/8/9 上午7:41, kernel test robot 写道: > Hi Yinbo, > > kernel test robot noticed the following build errors: > > [auto build test ERROR on usb/usb-testing] > [also build test ERROR on usb/usb-next usb/usb-linus linus/master v6.5-rc5 next-20230808] > [If your patch is applied to the wrong git tree, kindly drop us a note. > And when submitting patch, we suggest to use '--base' as documented in > https://git-scm.com/docs/git-format-patch#_base_tree_information] > > url: https://github.com/intel-lab-lkp/linux/commits/Yinbo-Zhu/usb-xhci-plat-fix-usb-disconnect-issue-after-s4/20230802-170845 > base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing > patch link: https://lore.kernel.org/r/20230802090642.1642-1-zhuyinbo%40loongson.cn > patch subject: [PATCH] usb: xhci-plat: fix usb disconnect issue after s4 > config: xtensa-randconfig-r093-20230808 (https://download.01.org/0day-ci/archive/20230809/202308090755.GOjEaQQg-lkp@intel.com/config) > compiler: xtensa-linux-gcc (GCC) 12.3.0 > reproduce: (https://download.01.org/0day-ci/archive/20230809/202308090755.GOjEaQQg-lkp@intel.com/reproduce) > > If you fix the issue in a separate patch/commit (i.e. not just a new version of > the same patch/commit), kindly add following tags > | Reported-by: kernel test robot <lkp@intel.com> > | Closes: https://lore.kernel.org/oe-kbuild-all/202308090755.GOjEaQQg-lkp@intel.com/ > > All errors (new ones prefixed by >>, old ones prefixed by <<): > > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-mediatek.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-samsung.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/backlight/platform_lcd.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/fbdev/goldfishfb.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/imx/clk-imxrt1050.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-mm.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-img.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-vdec.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-venc.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-mfg.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt6779-aud.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712-apmixedsys.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712-bdp.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712-img.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712-vdec.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt2712-venc.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt7622-eth.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt7622-hif.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt7622-aud.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt7986-apmixed.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt7986-topckgen.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8183-audio.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8183-cam.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8183-vdec.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-img.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-ipe.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-mfg.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-vdec.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8188-wpe.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-aud.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-cam.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-imp_iic_wrap.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-mdp.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-mm.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-msdc.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-scp_adsp.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8192-vdec.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8365-apmixedsys.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8365.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8365-apu.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8365-cam.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8365-vdec.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/mediatek/clk-mt8365-venc.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/clk_test.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/clk/clk-gate_test.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/qcom/hdma.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/imx/soc-imx8m.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/ixp4xx/ixp4xx-qmgr.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/mediatek/mtk-cmdq-helper.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/soc/amlogic/meson-clk-measure.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/regulator/tps6286x-regulator.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/tty/serial/8250/8250_base.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/tty/serial/8250/serial_cs.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/tty/serial/owl-uart.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/tty/goldfish.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/ttyprintk.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/hw_random/omap-rng.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/hw_random/omap3-rom-rng.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/hw_random/nomadik-rng.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/hw_random/st-rng.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-kunit.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-ram.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-raw-ram.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-w1.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/block/brd.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/block/loop.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mfd/qcom-pm8008.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dax/dax.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/host/xhci-pci-renesas.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/storage/uas.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_acm.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_mass_storage.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_fs.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_hid.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/mon/usbmon.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/i2c/busses/i2c-pxa.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/tuners/tda9887.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/leds/flash/leds-rt4505.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/goldfish/goldfish_pipe.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/chrome/cros_kunit.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mailbox/mtk-cmdq-mailbox.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/devfreq/governor_performance.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/devfreq/governor_userspace.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/iio/adc/ingenic-adc.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwtracing/intel_th/intel_th_msu_sink.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem_brcm_nvram.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem_u-boot-env.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/interconnect/imx/imx8mn-interconnect.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/parsers/brcm_u-boot.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/parsers/tplink_safeloader.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/chips/cfi_util.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mtd/maps/map_funcs.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-core.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-hub.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-gpio.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-master-ast-cf.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/fsi/fsi-scom.o > WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/siox/siox-bus-gpio.o >>> ERROR: modpost: "xhci_suspend" [drivers/usb/host/xhci-plat-hcd.ko] undefined! >>> ERROR: modpost: "xhci_resume" [drivers/usb/host/xhci-plat-hcd.ko] undefined! This compile error was due to that suspend callback initialization doesn't use CONFIG_PM_SLEEP in xhci_plat_pm_ops, and I will add it and fix this compile error. Thanks, Yinbo
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 28218c8f1837..41a213070435 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -451,7 +451,7 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev) return 0; } -static int __maybe_unused xhci_plat_resume(struct device *dev) +static int __maybe_unused xhci_plat_resume_common(struct device *dev, struct pm_message pmsg) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); @@ -466,7 +466,7 @@ static int __maybe_unused xhci_plat_resume(struct device *dev) if (ret) return ret; - ret = xhci_resume(xhci, PMSG_RESUME); + ret = xhci_resume(xhci, pmsg); if (ret) return ret; @@ -477,6 +477,16 @@ static int __maybe_unused xhci_plat_resume(struct device *dev) return 0; } +static int __maybe_unused xhci_plat_resume(struct device *dev) +{ + return xhci_plat_resume_common(dev, PMSG_RESUME); +} + +static int __maybe_unused xhci_plat_restore(struct device *dev) +{ + return xhci_plat_resume_common(dev, PMSG_RESTORE); +} + static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); @@ -499,7 +509,12 @@ static int __maybe_unused xhci_plat_runtime_resume(struct device *dev) } const struct dev_pm_ops xhci_plat_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume) + .suspend = xhci_plat_suspend, + .resume = xhci_plat_resume, + .freeze = xhci_plat_suspend, + .thaw = xhci_plat_resume, + .poweroff = xhci_plat_suspend, + .restore = xhci_plat_restore, SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend, xhci_plat_runtime_resume,
The xhci retaining bogus hardware states cause usb disconnect devices connected before hibernation(s4) and refer to the commit '547d55fa83 ("usb: ohci-platform: fix usb disconnect issue after s4")' which set flag "hibernated" as true when resume-from-hibernation and that the drivers will reset the hardware to get rid of any existing state and make sure resume from hibernation re-enumerates everything for xhci. Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> --- drivers/usb/host/xhci-plat.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-)