| Message ID | 20230823075751.4437-1-slark_xiao@163.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 4d9488b294e1f8353bbcadc4c7172a7f7490199b |
| Headers | show |
| Series | [v2] USB: serial: option: add FOXCONN T99W368/T99W373 product | expand |
On Wed, Aug 23, 2023 at 03:57:51PM +0800, Slark Xiao wrote: > The difference of T99W368 and T99W373 is the chip solution. > T99W368 is designed based on Qualcomm SDX65 and T99W373 is SDX62. > Signed-off-by: Slark Xiao <slark_xiao@163.com> > --- > v2: Remove defines of Foxconn vendor and product name. Thanks for the update. Now applied. Johan
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 8ac98e60fff5..d53ebe6ab2a5 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2232,6 +2232,10 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff), /* Foxconn T99W265 MBIM */ .driver_info = RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0ee, 0xff), /* Foxconn T99W368 MBIM */ + .driver_info = RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0f0, 0xff), /* Foxconn T99W373 MBIM */ + .driver_info = RSVD(3) }, { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 (IOT version) */ .driver_info = RSVD(4) | RSVD(5) | RSVD(6) }, { USB_DEVICE(0x1782, 0x4d10) }, /* Fibocom L610 (AT mode) */
The difference of T99W368 and T99W373 is the chip solution. T99W368 is designed based on Qualcomm SDX65 and T99W373 is SDX62. Test evidence as below: T: Bus=01 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f0 Rev=05.04 S: Manufacturer=FII S: Product=OLYMPIC USB WWAN Adapter S: SerialNumber=78ada8c4 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=01 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0ee Rev=05.04 S: Manufacturer=FII S: Product=OLYMPIC USB WWAN Adapter S: SerialNumber=78ada8d5 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Both of them share the same port configuration: 0&1: MBIM, 2: Modem, 3:GNSS, 4:NMEA, 5:Diag GNSS port don't use serial driver. Signed-off-by: Slark Xiao <slark_xiao@163.com> --- v2: Remove defines of Foxconn vendor and product name. --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+)