diff mbox series

[1/5] usb: dwc3: reference clock period configuration

Message ID 20230904071432.32309-1-tomasz.rostanski@thalesgroup.com (mailing list archive)
State New, archived
Headers show
Series [1/5] usb: dwc3: reference clock period configuration | expand

Commit Message

Tomasz Rostanski Sept. 4, 2023, 7:14 a.m. UTC 
From: Balaji Prakash J <bjagadee@codeaurora.org>

Set reference clock period when it differs from dwc3 default hardware
set.

We could calculate clock period based on reference clock frequency. But
this information is not always available. This is the case of PCI bus
attached USB host. For that reason we use a custom property.

Tested (USB2 only) on IPQ6010 SoC based board with 24 MHz reference
clock while hardware default is 19.2 MHz.

[ baruch: rewrite commit message; drop GFLADJ code; remove 'quirk-' from
  property name; mention tested hardware ]

Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Balaji Prakash J <bjagadee@codeaurora.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Nacked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/9f399bdf1ff752e31ab7497e3d5ce19bbb3ff247.1630389452.git.baruch@tkos.co.il
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.c | 29 +++++++++++++++++++++++++++++
 drivers/usb/dwc3/core.h |  6 ++++++
 2 files changed, 35 insertions(+)

Comments

Greg KH Sept. 4, 2023, 2:52 p.m. UTC | #1 
On Mon, Sep 04, 2023 at 09:14:22AM +0200, Tomasz Rostanski wrote:
> From: Balaji Prakash J <bjagadee@codeaurora.org>
> 
> Set reference clock period when it differs from dwc3 default hardware
> set.
> 
> We could calculate clock period based on reference clock frequency. But
> this information is not always available. This is the case of PCI bus
> attached USB host. For that reason we use a custom property.
> 
> Tested (USB2 only) on IPQ6010 SoC based board with 24 MHz reference
> clock while hardware default is 19.2 MHz.
> 
> [ baruch: rewrite commit message; drop GFLADJ code; remove 'quirk-' from
>   property name; mention tested hardware ]
> 
> Acked-by: Felipe Balbi <balbi@kernel.org>
> Signed-off-by: Balaji Prakash J <bjagadee@codeaurora.org>
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
> Nacked-by: Rob Herring <robh@kernel.org>
> Link: https://lore.kernel.org/r/9f399bdf1ff752e31ab7497e3d5ce19bbb3ff247.1630389452.git.baruch@tkos.co.il
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/usb/dwc3/core.c | 29 +++++++++++++++++++++++++++++
>  drivers/usb/dwc3/core.h |  6 ++++++
>  2 files changed, 35 insertions(+)

What is the git commit id of this change (and all the others in this
series?)

What stable tree(s) are you wanting this to be applied to?

And you forgot to sign off on the patches as well, that is required.

thanks,

greg k-h
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 6377b9cf81a5..7908c151b95d 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -26,6 +26,7 @@ 
 #include <linux/acpi.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/reset.h>
+#include <linux/bitfield.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
@@ -343,6 +344,29 @@  static void dwc3_frame_length_adjustment(struct dwc3 *dwc)
 	}
 }
 
+/**
+ * dwc3_ref_clk_period - Reference clock period configuration
+ *		Default reference clock period depends on hardware
+ *		configuration. For systems with reference clock that differs
+ *		from the default, this will set clock period in DWC3_GUCTL
+ *		register.
+ * @dwc: Pointer to our controller context structure
+ * @ref_clk_per: reference clock period in ns
+ */
+static void dwc3_ref_clk_period(struct dwc3 *dwc)
+{
+	u32 reg;
+
+	if (dwc->ref_clk_per == 0)
+		return;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUCTL);
+	reg &= ~DWC3_GUCTL_REFCLKPER_MASK;
+	reg |=  FIELD_PREP(DWC3_GUCTL_REFCLKPER_MASK, dwc->ref_clk_per);
+	dwc3_writel(dwc->regs, DWC3_GUCTL, reg);
+}
+
+
 /**
  * dwc3_free_one_event_buffer - Frees one event buffer
  * @dwc: Pointer to our controller context structure
@@ -1021,6 +1045,9 @@  static int dwc3_core_init(struct dwc3 *dwc)
 	/* Adjust Frame Length */
 	dwc3_frame_length_adjustment(dwc);
 
+	/* Adjust Reference Clock Period */
+	dwc3_ref_clk_period(dwc);
+
 	dwc3_set_incr_burst_type(dwc);
 
 	usb_phy_set_suspend(dwc->usb2_phy, 0);
@@ -1404,6 +1431,8 @@  static void dwc3_get_properties(struct dwc3 *dwc)
 				    &dwc->hsphy_interface);
 	device_property_read_u32(dev, "snps,quirk-frame-length-adjustment",
 				 &dwc->fladj);
+	device_property_read_u32(dev, "snps,ref-clock-period-ns",
+				 &dwc->ref_clk_per);
 
 	dwc->dis_metastability_quirk = device_property_read_bool(dev,
 				"snps,dis_metastability_quirk");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 3dcb5b744f7c..968608bd98e3 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -385,6 +385,10 @@ 
 #define DWC3_GFLADJ_30MHZ_SDBND_SEL		BIT(7)
 #define DWC3_GFLADJ_30MHZ_MASK			0x3f
 
+/* Global User Control Register*/
+#define DWC3_GUCTL_REFCLKPER_MASK		0xffc00000
+#define DWC3_GUCTL_REFCLKPER_SEL		22
+
 /* Global User Control Register 2 */
 #define DWC3_GUCTL2_RST_ACTBITLATER		BIT(14)
 
@@ -969,6 +973,7 @@  struct dwc3_scratchpad_array {
  * @regs: base address for our registers
  * @regs_size: address space size
  * @fladj: frame length adjustment
+ * @ref_clk_per: reference clock period configuration
  * @irq_gadget: peripheral controller's IRQ number
  * @otg_irq: IRQ number for OTG IRQs
  * @current_otg_role: current role of operation while using the OTG block
@@ -1153,6 +1158,7 @@  struct dwc3 {
 	struct power_supply	*usb_psy;
 
 	u32			fladj;
+	u32			ref_clk_per;
 	u32			irq_gadget;
 	u32			otg_irq;
 	u32			current_otg_role;