diff mbox series

[v2,2/2] xhci: Enable RPM on controllers that support low-power states

Message ID 20230915141530.1974640-3-Basavaraj.Natikar@amd.com (mailing list archive)
State Accepted
Commit a5d6264b638efeca35eff72177fd28d149e0764b
Headers show
Series Handle RPM for xhci-pci | expand

Commit Message

Basavaraj Natikar Sept. 15, 2023, 2:15 p.m. UTC 
Use the low-power states of the underlying platform to enable runtime PM.
If the platform doesn't support runtime D3, then enabling default RPM will
result in the controller malfunctioning, as in the case of hotplug devices
not being detected because of a failed interrupt generation.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
---
 drivers/usb/host/xhci-pci.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index bde43cef8846..95ed9404f6f8 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -695,7 +695,9 @@  static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	/* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
 	pm_runtime_put_noidle(&dev->dev);
 
-	if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
+	if (pci_choose_state(dev, PMSG_SUSPEND) == PCI_D0)
+		pm_runtime_forbid(&dev->dev);
+	else if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
 		pm_runtime_allow(&dev->dev);
 
 	dma_set_max_seg_size(&dev->dev, UINT_MAX);