| Message ID | 20230926-pxa-gpio-v2-2-984464d165dd@skole.hr (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ARM: pxa: GPIO descriptor conversions | expand |
Hi Duje, thanks for your patch! On Tue, Sep 26, 2023 at 5:46 PM Duje Mihanović <duje.mihanovic@skole.hr> wrote: > Sharp's Spitz board still uses the legacy GPIO interface for configuring > its two onboard LEDs. > > Convert them to use the GPIO descriptor interface. > > Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> (...) > +static struct gpiod_lookup_table spitz_led_gpio_table = { > + .dev_id = "leds-gpio", > + .table = { > + GPIO_LOOKUP("pxa-gpio", SPITZ_GPIO_LED_ORANGE, "led_orange", > + GPIO_ACTIVE_HIGH), > + GPIO_LOOKUP("pxa-gpio", SPITZ_GPIO_LED_GREEN, "led_green", > + GPIO_ACTIVE_HIGH), Unfortunately this is not how leds-gpio works. You have to have the name be NULL instead of "led_orange" etc, and put the LEDs in index order, in this case something like; + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_ORANGE, NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_GREEN, NULL, 1, GPIO_ACTIVE_HIGH), Yours, Linus Walleij
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 535e2b2e997b..91c4b208973c 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -452,16 +452,25 @@ static inline void spitz_keys_init(void) {} * LEDs ******************************************************************************/ #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +static struct gpiod_lookup_table spitz_led_gpio_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP("pxa-gpio", SPITZ_GPIO_LED_ORANGE, "led_orange", + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("pxa-gpio", SPITZ_GPIO_LED_GREEN, "led_green", + GPIO_ACTIVE_HIGH), + { } + } +}; + static struct gpio_led spitz_gpio_leds[] = { { .name = "spitz:amber:charge", .default_trigger = "sharpsl-charge", - .gpio = SPITZ_GPIO_LED_ORANGE, }, { .name = "spitz:green:hddactivity", .default_trigger = "disk-activity", - .gpio = SPITZ_GPIO_LED_GREEN, }, }; @@ -480,6 +489,11 @@ static struct platform_device spitz_led_device = { static void __init spitz_leds_init(void) { + gpiod_add_lookup_table(&spitz_led_gpio_table); + spitz_gpio_leds[0].gpiod = gpiod_get(&spitz_led_device.dev, + "led_orange", GPIOD_ASIS); + spitz_gpio_leds[1].gpiod = gpiod_get(&spitz_led_device.dev, + "led_green", GPIOD_ASIS); platform_device_register(&spitz_led_device); } #else
Sharp's Spitz board still uses the legacy GPIO interface for configuring its two onboard LEDs. Convert them to use the GPIO descriptor interface. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> --- arch/arm/mach-pxa/spitz.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)