| Message ID | 20230929-pxa-gpio-v3-2-af8d5e5d1f34@skole.hr (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ARM: pxa: GPIO descriptor conversions | expand |
Hi Duje, thanks for your patch! On Fri, Sep 29, 2023 at 3:15 PM Duje Mihanović <duje.mihanovic@skole.hr> wrote: > Sharp's Spitz board still uses the legacy GPIO interface for configuring > its two onboard LEDs. > > Convert them to use the GPIO descriptor interface. > > Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> (...) > + .table = { > + GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_ORANGE, NULL, 0, > + GPIO_ACTIVE_HIGH), > + GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_GREEN, NULL, 1, > + GPIO_ACTIVE_HIGH), This looks right! > + gpiod_add_lookup_table(&spitz_led_gpio_table); > + spitz_gpio_leds[0].gpiod = gpiod_get_index(&spitz_led_device.dev, > + NULL, 0, GPIOD_ASIS); > + spitz_gpio_leds[1].gpiod = gpiod_get_index(&spitz_led_device.dev, > + NULL, 1, GPIOD_ASIS); > platform_device_register(&spitz_led_device); I missed this before, sorry. This will probably not work. You need to register the spitz_led_device first, then you can get the gpiod:s. The lookup will use the device name to locate the device, and if the device isn't there it can't be found. Yours, Linus Walleij
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 535e2b2e997b..6aa4a3a9f7aa 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -452,16 +452,25 @@ static inline void spitz_keys_init(void) {} * LEDs ******************************************************************************/ #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +static struct gpiod_lookup_table spitz_led_gpio_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_ORANGE, NULL, 0, + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_GREEN, NULL, 1, + GPIO_ACTIVE_HIGH), + { } + } +}; + static struct gpio_led spitz_gpio_leds[] = { { .name = "spitz:amber:charge", .default_trigger = "sharpsl-charge", - .gpio = SPITZ_GPIO_LED_ORANGE, }, { .name = "spitz:green:hddactivity", .default_trigger = "disk-activity", - .gpio = SPITZ_GPIO_LED_GREEN, }, }; @@ -480,6 +489,11 @@ static struct platform_device spitz_led_device = { static void __init spitz_leds_init(void) { + gpiod_add_lookup_table(&spitz_led_gpio_table); + spitz_gpio_leds[0].gpiod = gpiod_get_index(&spitz_led_device.dev, + NULL, 0, GPIOD_ASIS); + spitz_gpio_leds[1].gpiod = gpiod_get_index(&spitz_led_device.dev, + NULL, 1, GPIOD_ASIS); platform_device_register(&spitz_led_device); } #else
Sharp's Spitz board still uses the legacy GPIO interface for configuring its two onboard LEDs. Convert them to use the GPIO descriptor interface. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> --- arch/arm/mach-pxa/spitz.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)