diff mbox series

[v2,2/2] usb: misc: onboard_usb_hub: add Genesys Logic gl3510 hub support

Message ID 20231002122909.2338049-3-jbrunet@baylibre.com (mailing list archive)
State Accepted
Commit b447e9efe50a1d64070c4f3ec1b1ee1882ee9c7a
Headers show
Series usb: misc: onboard_usb_hub: add gl3510 support | expand

Commit Message

Jerome Brunet Oct. 2, 2023, 12:29 p.m. UTC 
Add support for the gl3510 4 ports USB3.1 hub. This allows to control its
reset pins with a gpio.

No public documentation is available for this hub. Using the same reset
duration as the gl852g which seems OK.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/usb/misc/onboard_usb_hub.h | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
index 4026ba64c592..a9e2f6023c1c 100644
--- a/drivers/usb/misc/onboard_usb_hub.h
+++ b/drivers/usb/misc/onboard_usb_hub.h
@@ -56,6 +56,7 @@  static const struct of_device_id onboard_hub_match[] = {
 	{ .compatible = "usb5e3,608", .data = &genesys_gl850g_data, },
 	{ .compatible = "usb5e3,610", .data = &genesys_gl852g_data, },
 	{ .compatible = "usb5e3,620", .data = &genesys_gl852g_data, },
+	{ .compatible = "usb5e3,626", .data = &genesys_gl852g_data, },
 	{ .compatible = "usbbda,411", .data = &realtek_rts5411_data, },
 	{ .compatible = "usbbda,5411", .data = &realtek_rts5411_data, },
 	{ .compatible = "usbbda,414", .data = &realtek_rts5411_data, },