| Message ID | 20231004-pxa-gpio-v5-2-d99ae6fceea8@skole.hr (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ARM: pxa: GPIO descriptor conversions | expand |
On Wed, Oct 4, 2023 at 4:56 PM Duje Mihanović <duje.mihanovic@skole.hr> wrote: > > Sharp's Spitz board still uses the legacy GPIO interface for configuring > its two onboard LEDs. > > Convert them to use the GPIO descriptor interface. > > Reviewed-by: Linus Walleij <linus.walleij@linaro.org> > Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> > --- > arch/arm/mach-pxa/spitz.c | 18 ++++++++++++++++-- > 1 file changed, 16 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c > index 535e2b2e997b..b6a4085e9fb0 100644 > --- a/arch/arm/mach-pxa/spitz.c > +++ b/arch/arm/mach-pxa/spitz.c > @@ -452,16 +452,25 @@ static inline void spitz_keys_init(void) {} > * LEDs > ******************************************************************************/ > #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) > +static struct gpiod_lookup_table spitz_led_gpio_table = { > + .dev_id = "leds-gpio", > + .table = { > + GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_ORANGE, NULL, 0, > + GPIO_ACTIVE_HIGH), > + GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_GREEN, NULL, 1, > + GPIO_ACTIVE_HIGH), > + { } > + } > +}; > + > static struct gpio_led spitz_gpio_leds[] = { > { > .name = "spitz:amber:charge", > .default_trigger = "sharpsl-charge", > - .gpio = SPITZ_GPIO_LED_ORANGE, > }, > { > .name = "spitz:green:hddactivity", > .default_trigger = "disk-activity", > - .gpio = SPITZ_GPIO_LED_GREEN, > }, > }; > > @@ -480,7 +489,12 @@ static struct platform_device spitz_led_device = { > > static void __init spitz_leds_init(void) > { > + gpiod_add_lookup_table(&spitz_led_gpio_table); > platform_device_register(&spitz_led_device); > + spitz_gpio_leds[0].gpiod = gpiod_get_index(&spitz_led_device.dev, > + NULL, 0, GPIOD_ASIS); > + spitz_gpio_leds[1].gpiod = gpiod_get_index(&spitz_led_device.dev, > + NULL, 1, GPIOD_ASIS); You're not using the con_id you specified in the lookup table. How about using gpiod_get_array()? Bart > } > #else > static inline void spitz_leds_init(void) {} > > -- > 2.42.0 > >
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 535e2b2e997b..b6a4085e9fb0 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -452,16 +452,25 @@ static inline void spitz_keys_init(void) {} * LEDs ******************************************************************************/ #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +static struct gpiod_lookup_table spitz_led_gpio_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_ORANGE, NULL, 0, + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_GREEN, NULL, 1, + GPIO_ACTIVE_HIGH), + { } + } +}; + static struct gpio_led spitz_gpio_leds[] = { { .name = "spitz:amber:charge", .default_trigger = "sharpsl-charge", - .gpio = SPITZ_GPIO_LED_ORANGE, }, { .name = "spitz:green:hddactivity", .default_trigger = "disk-activity", - .gpio = SPITZ_GPIO_LED_GREEN, }, }; @@ -480,7 +489,12 @@ static struct platform_device spitz_led_device = { static void __init spitz_leds_init(void) { + gpiod_add_lookup_table(&spitz_led_gpio_table); platform_device_register(&spitz_led_device); + spitz_gpio_leds[0].gpiod = gpiod_get_index(&spitz_led_device.dev, + NULL, 0, GPIOD_ASIS); + spitz_gpio_leds[1].gpiod = gpiod_get_index(&spitz_led_device.dev, + NULL, 1, GPIOD_ASIS); } #else static inline void spitz_leds_init(void) {}