diff mbox series

[RFC,v5,6/6] input: ads7846: Move wait_for_sync() logic to driver

Message ID 20231004-pxa-gpio-v5-6-d99ae6fceea8@skole.hr (mailing list archive)
State Superseded
Headers show
Series ARM: pxa: GPIO descriptor conversions | expand

Commit Message

Duje Mihanović Oct. 4, 2023, 2:56 p.m. UTC 
If this code is left in the board file, the sync GPIO would have to be
separated into another lookup table during conversion to the GPIO
descriptor API (which is also done in this patch).

The only user of this code (Sharp Spitz) is also converted in this
patch.

Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 arch/arm/mach-pxa/spitz.c           | 12 ++----------
 drivers/input/touchscreen/ads7846.c | 22 +++++++++++++++-------
 include/linux/spi/ads7846.h         |  1 -
 3 files changed, 17 insertions(+), 18 deletions(-)

Comments

Bartosz Golaszewski Oct. 6, 2023, 7:11 a.m. UTC | #1 
On Wed, Oct 4, 2023 at 4:56 PM Duje Mihanović <duje.mihanovic@skole.hr> wrote:
>
> If this code is left in the board file, the sync GPIO would have to be
> separated into another lookup table during conversion to the GPIO
> descriptor API (which is also done in this patch).
>
> The only user of this code (Sharp Spitz) is also converted in this
> patch.
>
> Suggested-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Acked-by: Mark Brown <broonie@kernel.org>
> Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
> ---

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 26ec29c9cd1b..e8bc0249b503 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -520,22 +520,12 @@  static inline void spitz_leds_init(void) {}
  * SSP Devices
  ******************************************************************************/
 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static void spitz_ads7846_wait_for_hsync(void)
-{
-	while (gpio_get_value(SPITZ_GPIO_HSYNC))
-		cpu_relax();
-
-	while (!gpio_get_value(SPITZ_GPIO_HSYNC))
-		cpu_relax();
-}
-
 static struct ads7846_platform_data spitz_ads7846_info = {
 	.model			= 7846,
 	.vref_delay_usecs	= 100,
 	.x_plate_ohms		= 419,
 	.y_plate_ohms		= 486,
 	.pressure_max		= 1024,
-	.wait_for_sync		= spitz_ads7846_wait_for_hsync,
 };
 
 static struct gpiod_lookup_table spitz_ads7846_gpio_table = {
@@ -543,6 +533,8 @@  static struct gpiod_lookup_table spitz_ads7846_gpio_table = {
 	.table = {
 		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_TP_INT,
 			    "pendown", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_HSYNC,
+			    "sync", GPIO_ACTIVE_LOW),
 		{ }
 	},
 };
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index faea40dd66d0..139b0f3735d0 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -138,8 +138,7 @@  struct ads7846 {
 	void			*filter_data;
 	int			(*get_pendown_state)(void);
 	struct gpio_desc	*gpio_pendown;
-
-	void			(*wait_for_sync)(void);
+	struct gpio_desc	*sync;
 };
 
 enum ads7846_filter {
@@ -636,9 +635,15 @@  static const struct attribute_group ads784x_attr_group = {
 };
 
 /*--------------------------------------------------------------------------*/
-
-static void null_wait_for_sync(void)
+static void ads7846_wait_for_sync_gpio(struct ads7846 *ts)
 {
+	if (!ts->sync)
+		return;
+	while (!gpiod_get_value(ts->sync))
+		cpu_relax();
+
+	while (gpiod_get_value(ts->sync))
+		cpu_relax();
 }
 
 static int ads7846_debounce_filter(void *ads, int data_idx, int *val)
@@ -803,7 +808,7 @@  static void ads7846_read_state(struct ads7846 *ts)
 	packet->last_cmd_idx = 0;
 
 	while (true) {
-		ts->wait_for_sync();
+		ads7846_wait_for_sync_gpio(ts);
 
 		m = &ts->msg[msg_idx];
 		error = spi_sync(ts->spi, m);
@@ -1261,8 +1266,6 @@  static int ads7846_probe(struct spi_device *spi)
 		ts->penirq_recheck_delay_usecs =
 				pdata->penirq_recheck_delay_usecs;
 
-	ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
-
 	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
 	snprintf(ts->name, sizeof(ts->name), "ADS%d Touchscreen", ts->model);
 
@@ -1361,6 +1364,11 @@  static int ads7846_probe(struct spi_device *spi)
 	if (err)
 		return err;
 
+	ts->sync = devm_gpiod_get_optional(dev, "sync", GPIOD_IN);
+	if (IS_ERR(ts->sync))
+		return dev_err_probe(dev, PTR_ERR(ts->sync),
+				"Failed to get sync GPIO");
+
 	err = input_register_device(input_dev);
 	if (err)
 		return err;
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index a04c1c34c344..fa7c4f119023 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -38,7 +38,6 @@  struct ads7846_platform_data {
 	int	gpio_pendown_debounce;	/* platform specific debounce time for
 					 * the gpio_pendown */
 	int	(*get_pendown_state)(void);
-	void	(*wait_for_sync)(void);
 	bool	wakeup;
 	unsigned long irq_flags;
 };