| Message ID | 20231007154806.605-10-quic_kriskura@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add multiport support for DWC3 controllers | expand |
On 10/7/23 17:48, Krishna Kurapati wrote: > Enable tertiary controller for SA8295P (based on SC8280XP). > Add pinctrl support for usb ports to provide VBUS to connected peripherals. > > Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad
On Sat, Oct 07, 2023 at 09:18:05PM +0530, Krishna Kurapati wrote: > Enable tertiary controller for SA8295P (based on SC8280XP). > Add pinctrl support for usb ports to provide VBUS to connected peripherals. > > Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> > --- > arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 49 ++++++++++++++++++++++++ > 1 file changed, 49 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts > index fd253942e5e5..271000163823 100644 > --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts > +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts > @@ -9,6 +9,7 @@ > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/regulator/qcom,rpmh-regulator.h> > #include <dt-bindings/spmi/spmi.h> > +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> Sort order ('p' < 'r'). > +&usb_2 { > + pinctrl-0 = <&usb2_en_state>, > + <&usb3_en_state>, > + <&usb4_en_state>, > + <&usb5_en_state>; > + pinctrl-names = "default"; > + > + status = "okay"; > +}; > + > &usb_2_hsphy0 { > vdda-pll-supply = <&vreg_l5a>; > vdda18-supply = <&vreg_l7g>; > @@ -729,3 +740,41 @@ wake-n-pins { > }; > }; > }; > + > +&pmm8540c_gpios { Sort order here too ('p' < 't' in "&tlmm"). > + usb2_en_state: usb2-en-state { No need to include '_state' in the labels. Johan
On 10/23/2023 9:53 PM, Johan Hovold wrote: > On Sat, Oct 07, 2023 at 09:18:05PM +0530, Krishna Kurapati wrote: >> Enable tertiary controller for SA8295P (based on SC8280XP). >> Add pinctrl support for usb ports to provide VBUS to connected peripherals. >> >> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 49 ++++++++++++++++++++++++ >> 1 file changed, 49 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts >> index fd253942e5e5..271000163823 100644 >> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts >> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts >> @@ -9,6 +9,7 @@ >> #include <dt-bindings/gpio/gpio.h> >> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> >> #include <dt-bindings/spmi/spmi.h> >> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> > > Sort order ('p' < 'r'). ACK > >> +&usb_2 { >> + pinctrl-0 = <&usb2_en_state>, >> + <&usb3_en_state>, >> + <&usb4_en_state>, >> + <&usb5_en_state>; >> + pinctrl-names = "default"; >> + >> + status = "okay"; >> +}; >> + >> &usb_2_hsphy0 { >> vdda-pll-supply = <&vreg_l5a>; >> vdda18-supply = <&vreg_l7g>; >> @@ -729,3 +740,41 @@ wake-n-pins { >> }; >> }; >> }; >> + >> +&pmm8540c_gpios { > > Sort order here too ('p' < 't' in "&tlmm"). > ACK. >> + usb2_en_state: usb2-en-state { > > No need to include '_state' in the labels. > Any specific reason ? I have no problem if removing the suffix but just wanted to know the reason. Regards, Krishna,
On Mon, Oct 23, 2023 at 11:12:40PM +0530, Krishna Kurapati PSSNV wrote: > On 10/23/2023 9:53 PM, Johan Hovold wrote: > > On Sat, Oct 07, 2023 at 09:18:05PM +0530, Krishna Kurapati wrote: > >> + usb2_en_state: usb2-en-state { > > > > No need to include '_state' in the labels. > > > Any specific reason ? I have no problem if removing the suffix but just > wanted to know the reason. For consistency with the rest of the sc8280xp devicetree sources (including this file) where we've used that pattern (e.g. as reproducing "state" in the label is mostly redundant). For example: pcie2a_default: pcie2a-default-state {} and nvme_reg_en: nvme-reg-en-state {} Johan
On 10/24/2023 12:50 PM, Johan Hovold wrote: > On Mon, Oct 23, 2023 at 11:12:40PM +0530, Krishna Kurapati PSSNV wrote: >> On 10/23/2023 9:53 PM, Johan Hovold wrote: >>> On Sat, Oct 07, 2023 at 09:18:05PM +0530, Krishna Kurapati wrote: > >>>> + usb2_en_state: usb2-en-state { >>> >>> No need to include '_state' in the labels. >>> >> Any specific reason ? I have no problem if removing the suffix but just >> wanted to know the reason. > > For consistency with the rest of the sc8280xp devicetree sources > (including this file) where we've used that pattern (e.g. as reproducing > "state" in the label is mostly redundant). For example: > > pcie2a_default: pcie2a-default-state {} > > and > > nvme_reg_en: nvme-reg-en-state {} > Thanks for the reference. Regards, Krishna,
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index fd253942e5e5..271000163823 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include "sa8540p.dtsi" #include "sa8540p-pmics.dtsi" @@ -584,6 +585,16 @@ &usb_1_qmpphy { status = "okay"; }; +&usb_2 { + pinctrl-0 = <&usb2_en_state>, + <&usb3_en_state>, + <&usb4_en_state>, + <&usb5_en_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + &usb_2_hsphy0 { vdda-pll-supply = <&vreg_l5a>; vdda18-supply = <&vreg_l7g>; @@ -729,3 +740,41 @@ wake-n-pins { }; }; }; + +&pmm8540c_gpios { + usb2_en_state: usb2-en-state { + pins = "gpio9"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + output-high; + power-source = <0>; + }; +}; + +&pmm8540e_gpios { + usb3_en_state: usb3-en-state { + pins = "gpio5"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + output-high; + power-source = <0>; + }; +}; + +&pmm8540g_gpios { + usb4_en_state: usb4-en-state { + pins = "gpio5"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + output-high; + power-source = <0>; + }; + + usb5_en_state: usb5-en-state { + pins = "gpio9"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + output-high; + power-source = <0>; + }; +};
Enable tertiary controller for SA8295P (based on SC8280XP). Add pinctrl support for usb ports to provide VBUS to connected peripherals. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> --- arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 49 ++++++++++++++++++++++++ 1 file changed, 49 insertions(+)