diff mbox series

[14/19] xhci: Loosen RPM as default policy to cover for AMD xHC 1.1

Message ID 20231019102924.2797346-15-mathias.nyman@linux.intel.com (mailing list archive)
State Superseded
Commit 4baf1218150985ee3ab0a27220456a1f027ea0ac
Headers show
Series xhci features for usb-next | expand

Commit Message

Mathias Nyman Oct. 19, 2023, 10:29 a.m. UTC 
From: Basavaraj Natikar <Basavaraj.Natikar@amd.com>

The AMD USB host controller (1022:43f7) isn't going into PCI D3 by default
without anything connected. This is because the policy that was introduced
by commit a611bf473d1f ("xhci-pci: Set runtime PM as default policy on all
xHC 1.2 or later devices") only covered 1.2 or later.

The 1.1 specification also has the same requirement as the 1.2
specification for D3 support. So expand the runtime PM as default policy
to all AMD 1.1 devices as well.

Fixes: a611bf473d1f ("xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices")
Link: https://composter.com.ua/documents/xHCI_Specification_for_USB.pdf
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-pci.c | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index b9ae5c2a2527..bde43cef8846 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -535,6 +535,8 @@  static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	/* xHC spec requires PCI devices to support D3hot and D3cold */
 	if (xhci->hci_version >= 0x120)
 		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
+	else if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version >= 0x110)
+		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
 		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,