diff mbox series

[1/3] dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types

Message ID 20231120161607.7405-2-johan+linaro@kernel.org (mailing list archive)
State Accepted
Commit 0c2671f33a9c975d752216739d6a05cb88e98aa4
Headers show
Series USB: dwc3: qcom: fix wakeup after probe deferral | expand

Commit Message

Johan Hovold Nov. 20, 2023, 4:16 p.m. UTC
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: 3828026c9ec8 ("dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Krzysztof Kozlowski Nov. 20, 2023, 6:19 p.m. UTC | #1
On 20/11/2023 17:16, Johan Hovold wrote:
> The DP/DM wakeup interrupts are edge triggered and which edge to trigger
> on depends on use-case and whether a Low speed or Full/High speed device
> is connected.
> 
> Fixes: 3828026c9ec8 ("dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings")
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index e889158ca205..915c8205623b 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -521,8 +521,8 @@  examples:
 
             interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
+                         <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>;
             interrupt-names = "hs_phy_irq", "ss_phy_irq",
                           "dm_hs_phy_irq", "dp_hs_phy_irq";