diff mbox series

[net,v3,4/5] r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()

Message ID 20231129132521.net.v3.4.I9c7bfe6fb76850f0323b3996e25a10ef0281fb7a@changeid (mailing list archive)
State Accepted
Commit 8c53a7bd706535a9cf4e2ec3a4e8d61d46353ca0
Headers show
Series [net,v3,1/5] r8152: Hold the rtnl_lock for all of reset | expand

Commit Message

Doug Anderson Nov. 29, 2023, 9:25 p.m. UTC
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in r8153_pre_firmware_1().

Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

(no changes since v2)

Changes in v2:
- Added Fixes tag to RTL8152_INACCESSIBLE patches.
- Split RTL8152_INACCESSIBLE patches by the commit the loop came from.

 drivers/net/usb/r8152.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Hayes Wang Nov. 30, 2023, 8:27 a.m. UTC | #1
Douglas Anderson <dianders@chromium.org>
> Sent: Thursday, November 30, 2023 5:25 AM
[...]
> 
> Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
> so that they don't delay too long if the device becomes
> inaccessible. Add the break to the loop in r8153_pre_firmware_1().
> 
> Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153")
> Reviewed-by: Grant Grundler <grundler@chromium.org>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Acked-by: Hayes Wang <hayeswang@realtek.com>

Best Regards,
Hayes
diff mbox series

Patch

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index c4dd81e2421f..3958eb622d47 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -5645,6 +5645,8 @@  static int r8153_pre_firmware_1(struct r8152 *tp)
 	for (i = 0; i < 104; i++) {
 		u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_WDT1_CTRL);
 
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			return -ENODEV;
 		if (!(ocp_data & WTD1_EN))
 			break;
 		usleep_range(1000, 2000);