diff mbox series

[2/3] usb: chipidea: wait controller resume finished for wakeup irq

Message ID 20231214112622.2412321-2-xu.yang_2@nxp.com (mailing list archive)
State Superseded
Headers show
Series [1/3] usb: chipidea: ci_hdrc_imx: add wakeup clock and keep it always on | expand

Commit Message

Xu Yang Dec. 14, 2023, 11:26 a.m. UTC 
After the chipidea driver introduce extcon for id and vbus, it's able
to wakeup from another irq source, in case the system with extcon ID
cable, wakeup from usb ID cable and device removal, the usb device
disconnect irq may come firstly before the extcon notifier while system
resume, so we will get 2 "wakeup" irq, one for usb device disconnect;
and one for extcon ID cable change(real wakeup event), current driver
treat them as 2 successive wakeup irq so can't handle it correctly, then
finally the usb irq can't be enabled. This patch adds a check to bypass
further usb events before controller resume finished to fix it.

Fixes: 1f874edcb731 ("usb: chipidea: add runtime power management support")
cc: <stable@vger.kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
---
 drivers/usb/chipidea/core.c | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 7ac39a281b8c..85e9c3ab66e9 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -523,6 +523,13 @@  static irqreturn_t ci_irq_handler(int irq, void *data)
 	u32 otgsc = 0;
 
 	if (ci->in_lpm) {
+		/*
+		 * If we already have a wakeup irq pending there,
+		 * let's just return to wait resume finished firstly.
+		 */
+		if (ci->wakeup_int)
+			return IRQ_HANDLED;
+
 		disable_irq_nosync(irq);
 		ci->wakeup_int = true;
 		pm_runtime_get(ci->dev);