@@ -50,13 +50,17 @@ enum {
enum dp_state {
DP_STATE_IDLE,
DP_STATE_ENTER,
+ DP_STATE_ENTER_PRIME,
DP_STATE_UPDATE,
DP_STATE_CONFIGURE,
+ DP_STATE_CONFIGURE_PRIME,
DP_STATE_EXIT,
+ DP_STATE_EXIT_PRIME,
};
struct dp_altmode {
struct typec_displayport_data data;
+ struct typec_displayport_data data_prime;
enum dp_state state;
bool hpd;
@@ -67,6 +71,7 @@ struct dp_altmode {
struct typec_altmode *alt;
const struct typec_altmode *port;
struct fwnode_handle *connector_fwnode;
+ struct typec_altmode *plug_prime;
};
static int dp_altmode_notify(struct dp_altmode *dp)
@@ -99,12 +104,18 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con)
conf |= DP_CONF_UFP_U_AS_DFP_D;
pin_assign = DP_CAP_UFP_D_PIN_ASSIGN(dp->alt->vdo) &
DP_CAP_DFP_D_PIN_ASSIGN(dp->port->vdo);
+ /* Account for active cable capabilities */
+ if (dp->plug_prime)
+ pin_assign &= DP_CAP_DFP_D_PIN_ASSIGN(dp->plug_prime->vdo);
break;
case DP_STATUS_CON_UFP_D:
case DP_STATUS_CON_BOTH: /* NOTE: First acting as DP source */
conf |= DP_CONF_UFP_U_AS_UFP_D;
pin_assign = DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo) &
DP_CAP_PIN_ASSIGN_DFP_D(dp->port->vdo);
+ /* Account for active cable capabilities */
+ if (dp->plug_prime)
+ pin_assign &= DP_CAP_UFP_D_PIN_ASSIGN(dp->plug_prime->vdo);
break;
default:
break;
@@ -130,6 +141,8 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con)
}
dp->data.conf = conf;
+ if (dp->plug_prime)
+ dp->data_prime.conf = conf;
return 0;
}
@@ -143,7 +156,9 @@ static int dp_altmode_status_update(struct dp_altmode *dp)
if (configured && (dp->data.status & DP_STATUS_SWITCH_TO_USB)) {
dp->data.conf = 0;
- dp->state = DP_STATE_CONFIGURE;
+ dp->data_prime.conf = 0;
+ dp->state = dp->plug_prime ? DP_STATE_CONFIGURE_PRIME :
+ DP_STATE_CONFIGURE;
} else if (dp->data.status & DP_STATUS_EXIT_DP_MODE) {
dp->state = DP_STATE_EXIT;
} else if (!(con & DP_CONF_CURRENTLY(dp->data.conf))) {
@@ -209,6 +224,19 @@ static int dp_altmode_configure_vdm(struct dp_altmode *dp, u32 conf)
return ret;
}
+static int dp_altmode_configure_vdm_cable(struct dp_altmode *dp, u32 conf)
+{
+ int svdm_version = typec_altmode_get_cable_svdm_version(dp->plug_prime);
+ u32 header;
+
+ if (svdm_version < 0)
+ return svdm_version;
+
+ header = DP_HEADER(dp, svdm_version, DP_CMD_CONFIGURE);
+
+ return typec_cable_altmode_vdm(dp->plug_prime, TYPEC_PLUG_SOP_P, header, &conf, 2);
+}
+
static void dp_altmode_work(struct work_struct *work)
{
struct dp_altmode *dp = container_of(work, struct dp_altmode, work);
@@ -225,6 +253,19 @@ static void dp_altmode_work(struct work_struct *work)
if (ret && ret != -EBUSY)
dev_err(&dp->alt->dev, "failed to enter mode\n");
break;
+ case DP_STATE_ENTER_PRIME:
+ ret = typec_cable_altmode_enter(dp->alt, TYPEC_PLUG_SOP_P, NULL);
+ /*
+ * If we fail to enter Alt Mode on SOP', then we should drop the
+ * plug from the driver and attempt to run the driver without
+ * it.
+ */
+ if (ret && ret != -EBUSY) {
+ dev_err(&dp->alt->dev, "plug failed to enter mode\n");
+ dp->state = DP_STATE_ENTER;
+ goto disable_prime;
+ }
+ break;
case DP_STATE_UPDATE:
svdm_version = typec_altmode_get_svdm_version(dp->alt);
if (svdm_version < 0)
@@ -243,10 +284,24 @@ static void dp_altmode_work(struct work_struct *work)
dev_err(&dp->alt->dev,
"unable to send Configure command (%d)\n", ret);
break;
+ case DP_STATE_CONFIGURE_PRIME:
+ ret = dp_altmode_configure_vdm_cable(dp, dp->data_prime.conf);
+ if (ret) {
+ dev_err(&dp->plug_prime->dev,
+ "unable to send Configure command (%d)\n",
+ ret);
+ dp->state = DP_STATE_CONFIGURE;
+ goto disable_prime;
+ }
+ break;
case DP_STATE_EXIT:
if (typec_altmode_exit(dp->alt))
dev_err(&dp->alt->dev, "Exit Mode Failed!\n");
break;
+ case DP_STATE_EXIT_PRIME:
+ if (typec_cable_altmode_exit(dp->plug_prime, TYPEC_PLUG_SOP_P))
+ dev_err(&dp->plug_prime->dev, "Exit Mode Failed!\n");
+ break;
default:
break;
}
@@ -254,6 +309,12 @@ static void dp_altmode_work(struct work_struct *work)
dp->state = DP_STATE_IDLE;
mutex_unlock(&dp->lock);
+ return;
+
+disable_prime:
+ typec_altmode_put_plug(dp->plug_prime);
+ dp->plug_prime = NULL;
+ schedule_work(&dp->work);
}
static void dp_altmode_attention(struct typec_altmode *alt, const u32 vdo)
@@ -314,6 +375,8 @@ static int dp_altmode_vdm(struct typec_altmode *alt,
dp->hpd = false;
sysfs_notify(&dp->alt->dev.kobj, "displayport", "hpd");
}
+ if (dp->plug_prime)
+ dp->state = DP_STATE_EXIT_PRIME;
break;
case DP_CMD_STATUS_UPDATE:
dp->data.status = *vdo;
@@ -348,10 +411,84 @@ static int dp_altmode_vdm(struct typec_altmode *alt,
return ret;
}
+static int dp_cable_altmode_vdm(struct typec_altmode *alt, enum typec_plug_index sop,
+ const u32 hdr, const u32 *vdo, int count)
+{
+ struct dp_altmode *dp = typec_altmode_get_drvdata(alt);
+ int cmd_type = PD_VDO_CMDT(hdr);
+ int cmd = PD_VDO_CMD(hdr);
+ int ret = 0;
+
+ mutex_lock(&dp->lock);
+
+ if (dp->state != DP_STATE_IDLE) {
+ ret = -EBUSY;
+ goto err_unlock;
+ }
+
+ switch (cmd_type) {
+ case CMDT_RSP_ACK:
+ switch (cmd) {
+ case CMD_ENTER_MODE:
+ typec_altmode_update_active(dp->plug_prime, true);
+ dp->state = DP_STATE_ENTER;
+ break;
+ case CMD_EXIT_MODE:
+ dp->data_prime.status = 0;
+ dp->data_prime.conf = 0;
+ typec_altmode_update_active(dp->plug_prime, false);
+ break;
+ case DP_CMD_CONFIGURE:
+ dp->state = DP_STATE_CONFIGURE;
+ break;
+ default:
+ break;
+ }
+ break;
+ case CMDT_RSP_NAK:
+ switch (cmd) {
+ case DP_CMD_CONFIGURE:
+ dp->data_prime.conf = 0;
+ /* Attempt to configure on SOP, drop plug */
+ typec_altmode_put_plug(dp->plug_prime);
+ dp->plug_prime = NULL;
+ dp->state = DP_STATE_CONFIGURE;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (dp->state != DP_STATE_IDLE)
+ schedule_work(&dp->work);
+
+err_unlock:
+ mutex_unlock(&dp->lock);
+ return ret;
+}
+
static int dp_altmode_activate(struct typec_altmode *alt, int activate)
{
- return activate ? typec_altmode_enter(alt, NULL) :
- typec_altmode_exit(alt);
+ struct dp_altmode *dp = typec_altmode_get_drvdata(alt);
+ int ret;
+
+ if (activate) {
+ if (dp->plug_prime) {
+ ret = typec_cable_altmode_enter(alt, TYPEC_PLUG_SOP_P, NULL);
+ if (ret < 0) {
+ typec_altmode_put_plug(dp->plug_prime);
+ dp->plug_prime = NULL;
+ } else {
+ return ret;
+ }
+ }
+ return typec_altmode_enter(alt, NULL);
+ } else {
+ return typec_altmode_exit(alt);
+ }
}
static const struct typec_altmode_ops dp_altmode_ops = {
@@ -360,6 +497,10 @@ static const struct typec_altmode_ops dp_altmode_ops = {
.activate = dp_altmode_activate,
};
+static const struct typec_cable_ops dp_cable_ops = {
+ .vdm = dp_cable_altmode_vdm,
+};
+
static const char * const configurations[] = {
[DP_CONF_USB] = "USB",
[DP_CONF_DFP_D] = "source",
@@ -501,6 +642,7 @@ pin_assignment_store(struct device *dev, struct device_attribute *attr,
/* Only send Configure command if a configuration has been set */
if (dp->alt->active && DP_CONF_CURRENTLY(dp->data.conf)) {
+ /* todo: send manual configure over SOP'*/
ret = dp_altmode_configure_vdm(dp, conf);
if (ret)
goto out_unlock;
@@ -574,6 +716,7 @@ static const struct attribute_group dp_altmode_group = {
int dp_altmode_probe(struct typec_altmode *alt)
{
const struct typec_altmode *port = typec_altmode_get_partner(alt);
+ struct typec_altmode *plug = typec_altmode_get_plug(alt, TYPEC_PLUG_SOP_P);
struct fwnode_handle *fwnode;
struct dp_altmode *dp;
int ret;
@@ -603,6 +746,13 @@ int dp_altmode_probe(struct typec_altmode *alt)
alt->desc = "DisplayPort";
alt->ops = &dp_altmode_ops;
+ if (plug) {
+ plug->desc = "Displayport";
+ plug->cable_ops = &dp_cable_ops;
+ }
+
+ dp->plug_prime = plug;
+
fwnode = dev_fwnode(alt->dev.parent->parent); /* typec_port fwnode */
if (fwnode_property_present(fwnode, "displayport"))
dp->connector_fwnode = fwnode_find_reference(fwnode, "displayport", 0);
@@ -612,8 +762,10 @@ int dp_altmode_probe(struct typec_altmode *alt)
dp->connector_fwnode = NULL;
typec_altmode_set_drvdata(alt, dp);
+ if (plug)
+ typec_altmode_set_drvdata(plug, dp);
- dp->state = DP_STATE_ENTER;
+ dp->state = plug ? DP_STATE_ENTER_PRIME : DP_STATE_ENTER;
schedule_work(&dp->work);
return 0;
@@ -626,6 +778,7 @@ void dp_altmode_remove(struct typec_altmode *alt)
sysfs_remove_group(&alt->dev.kobj, &dp_altmode_group);
cancel_work_sync(&dp->work);
+ typec_altmode_put_plug(dp->plug_prime);
if (dp->connector_fwnode) {
drm_connector_oob_hotplug_event(dp->connector_fwnode,
Implement active cable VDM support for SOP' according to the DisplayPort Alt Mode 2.0 specification. When probing the DisplayPort driver, the state machine will transition to Enter Mode on SOP' if an active cable altmode is detected. The SVDM flow is as followed: (1) Enter Mode SOP' (2) Enter Mode SOP (3) Status Update SOP (4) Configure SOP' (5) Configure SOP Status Update on SOP' after Enter Mode is optional and not implemented for now. When exiting the alt mode, send Exit Mode over SOP' after SOP. Should an altmode vdm fail on SOP', the DisplayPort driver will drop its reference to the plug and attempt to continue in SOP operation. Add new dp_state enums DP_STATE_ENTER_PRIME, DP_STATE_CONFIGURE_PRIME, and DP_STATE_EXIT_PRIME. dp_altmode adds typec_displayport_data for the cable plug to store the plug configuration and adds a typec_altmode reference for the cable plug. dp_altmode_configure takes the cable pin assignment capabilities into account when deciding on pin configuration. dp_altmode_configure_vdm_cable sends the configure message on SOP'. dp_altmode_activate now attempts to enter on SOP' if applicable, and will attempt to enter on SOP on failure. dp_cable_altmode_vdm handles VDMs passed to the DisplayPort driver from the tcpm. Signed-off-by: RD Babiera <rdbabiera@google.com> --- Changes since v1: * dp_altmode_configure_vdm no longer handles sop', now handled by dp_altmode_configure_vdm_cable * dp_exit_mode_handler deleted * dp_altmode_vdm no longer handles sop', now handled by dp_cable_altmode_vdm as typec_cable_ops callback assigned to plug_prime if it exists. * driver data registered to plug_prime if applicable. --- drivers/usb/typec/altmodes/displayport.c | 161 ++++++++++++++++++++++- 1 file changed, 157 insertions(+), 4 deletions(-)