diff mbox series

[v3] usb: xhci-plat: fix usb disconnect issue after s4

Message ID 20231228071113.1719-1-zhuyinbo@loongson.cn (mailing list archive)
State Accepted
Commit 6d6887c42e946f43bed2e64571a40c8476a1e4a9
Headers show
Series [v3] usb: xhci-plat: fix usb disconnect issue after s4 | expand

Commit Message

Yinbo Zhu Dec. 28, 2023, 7:11 a.m. UTC
The xhci retaining bogus hardware states cause usb disconnect devices
connected before hibernation(s4) and refer to the commit 'f3d478858be
("usb: ohci-platform: fix usb disconnect issue after s4")' which set
flag "hibernated" as true when resume-from-hibernation and that the
drivers will reset the hardware to get rid of any existing state and
make sure resume from hibernation re-enumerates everything for xhci.

Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
---
Change in v2:
		1. Add CONFIG_PM_SLEEP in xhci_plat_pm_ops that for fix
		   compile issue when CONFIG_PM not enable.
Change in v3:
		1. Using pm_ptr() and pm_sleep_ptr() macros instead of the
		   #ifdef CONFIG_PM_SLEEP and get rif of the __maybe_unused
		   flags.

 drivers/usb/host/xhci-plat.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index b93161374293..14a2c5f09768 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -423,7 +423,7 @@  void xhci_plat_remove(struct platform_device *dev)
 }
 EXPORT_SYMBOL_GPL(xhci_plat_remove);
 
-static int __maybe_unused xhci_plat_suspend(struct device *dev)
+static int xhci_plat_suspend(struct device *dev)
 {
 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
@@ -451,7 +451,7 @@  static int __maybe_unused xhci_plat_suspend(struct device *dev)
 	return 0;
 }
 
-static int __maybe_unused xhci_plat_resume(struct device *dev)
+static int xhci_plat_resume_common(struct device *dev, struct pm_message pmsg)
 {
 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
@@ -473,7 +473,7 @@  static int __maybe_unused xhci_plat_resume(struct device *dev)
 	if (ret)
 		goto disable_clks;
 
-	ret = xhci_resume(xhci, PMSG_RESUME);
+	ret = xhci_resume(xhci, pmsg);
 	if (ret)
 		goto disable_clks;
 
@@ -492,6 +492,16 @@  static int __maybe_unused xhci_plat_resume(struct device *dev)
 	return ret;
 }
 
+static int xhci_plat_resume(struct device *dev)
+{
+	return xhci_plat_resume_common(dev, PMSG_RESUME);
+}
+
+static int xhci_plat_restore(struct device *dev)
+{
+	return xhci_plat_resume_common(dev, PMSG_RESTORE);
+}
+
 static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
 {
 	struct usb_hcd  *hcd = dev_get_drvdata(dev);
@@ -514,7 +524,12 @@  static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
 }
 
 const struct dev_pm_ops xhci_plat_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
+	.suspend = pm_sleep_ptr(xhci_plat_suspend),
+	.resume = pm_sleep_ptr(xhci_plat_resume),
+	.freeze = pm_sleep_ptr(xhci_plat_suspend),
+	.thaw = pm_sleep_ptr(xhci_plat_resume),
+	.poweroff = pm_sleep_ptr(xhci_plat_suspend),
+	.restore = pm_sleep_ptr(xhci_plat_restore),
 
 	SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
 			   xhci_plat_runtime_resume,