new file mode 100644
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/st,stm32mp25-rifsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 Resource isolation framework security controller
+
+maintainers:
+ - Gatien Chevallier <gatien.chevallier@foss.st.com>
+
+description: |
+ Resource isolation framework (RIF) is a comprehensive set of hardware blocks
+ designed to enforce and manage isolation of STM32 hardware resources like
+ memory and peripherals.
+
+ The RIFSC (RIF security controller) is composed of three sets of registers,
+ each managing a specific set of hardware resources:
+ - RISC registers associated with RISUP logic (resource isolation device unit
+ for peripherals), assign all non-RIF aware peripherals to zero, one or
+ any security domains (secure, privilege, compartment).
+ - RIMC registers: associated with RIMU logic (resource isolation master
+ unit), assign all non RIF-aware bus master to one security domain by
+ setting secure, privileged and compartment information on the system bus.
+ Alternatively, the RISUP logic controlling the device port access to a
+ peripheral can assign target bus attributes to this peripheral master port
+ (supported attribute: CID).
+ - RISC registers associated with RISAL logic (resource isolation device unit
+ for address space - Lite version), assign address space subregions to one
+ security domains (secure, privilege, compartment).
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32mp25-rifsc
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: st,stm32mp25-rifsc
+ - const: simple-bus
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+ "#access-controller-cells":
+ const: 1
+ description:
+ Contains the firewall ID associated to the peripheral.
+
+patternProperties:
+ "^.*@[0-9a-f]+$":
+ description: Peripherals
+ type: object
+
+ additionalProperties: true
+
+ required:
+ - access-controllers
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - "#access-controller-cells"
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ // In this example, the usart2 device refers to rifsc as its domain
+ // controller.
+ // Access rights are verified before creating devices.
+
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ rifsc: bus@42080000 {
+ compatible = "st,stm32mp25-rifsc", "simple-bus";
+ reg = <0x42080000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #access-controller-cells = <1>;
+ ranges;
+
+ usart2: serial@400e0000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x400e0000 0x400>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ck_flexgen_08>;
+ access-controllers = <&rifsc 32>;
+ };
+ };