@@ -1099,6 +1099,12 @@ static int tcpm_set_roles(struct tcpm_port *port, bool attached,
if (ret < 0)
return ret;
+ if (port->tcpc->set_orientation) {
+ ret = port->tcpc->set_orientation(port->tcpc, orientation);
+ if (ret < 0)
+ return ret;
+ }
+
port->pwr_role = role;
port->data_role = data;
typec_set_data_role(port->typec_port, data);
@@ -133,6 +133,8 @@ struct tcpc_dev {
enum typec_cc_status *cc2);
int (*set_polarity)(struct tcpc_dev *dev,
enum typec_cc_polarity polarity);
+ int (*set_orientation)(struct tcpc_dev *dev,
+ enum typec_orientation orientation);
int (*set_vconn)(struct tcpc_dev *dev, bool on);
int (*set_vbus)(struct tcpc_dev *dev, bool on, bool charge);
int (*set_current_limit)(struct tcpc_dev *dev, u32 max_ma, u32 mv);
This adds the support to set the connector orientation value accordingly. This is part of the optional CONFIG_STANDARD_OUTPUT register 0x18, specified within the USB port controller spsicification rev. 2.0 [1]. [1] https://www.usb.org/sites/default/files/documents/usb-port_controller_specification_rev2.0_v1.0_0.pdf Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> --- drivers/usb/typec/tcpm/tcpm.c | 6 ++++++ include/linux/usb/tcpm.h | 2 ++ 2 files changed, 8 insertions(+)