| Message ID | 20240210070934.2549994-4-swboyd@chromium.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | platform/chrome: Add DT USB/DP muxing/topology to Trogdor | expand |
On Fri, 09 Feb 2024 23:09:14 -0800, Stephen Boyd wrote: > Add a graph with 4 output endpoints to this hub binding to support the > scenario where a downstream facing port is connected to a device that > isn't a connector or a USB device with a VID:PID. This will be used to > connect downstream facing ports to USB type-c switches so the USB > superspeed and high speed lanes can be put onto USB connectors. > > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> > Cc: Conor Dooley <conor+dt@kernel.org> > Cc: Matthias Kaehlcke <mka@chromium.org> > Cc: <linux-usb@vger.kernel.org> > Cc: <devicetree@vger.kernel.org> > Cc: Pin-yen Lin <treapking@chromium.org> > Cc: maciek swiech <drmasquatch@google.com> > Signed-off-by: Stephen Boyd <swboyd@chromium.org> > --- > .../bindings/usb/realtek,rts5411.yaml | 50 +++++++++++++++++++ > 1 file changed, 50 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/usb/realtek,rts5411.example.dts:32.21-31: Warning (reg_format): /example-0/usb/hub@1/device@2:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/usb/realtek,rts5411.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/usb/realtek,rts5411.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/usb/realtek,rts5411.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/usb/realtek,rts5411.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/usb/realtek,rts5411.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/usb/realtek,rts5411.example.dts:30.26-33.19: Warning (avoid_default_addr_size): /example-0/usb/hub@1/device@2: Relying on default #address-cells value Documentation/devicetree/bindings/usb/realtek,rts5411.example.dts:30.26-33.19: Warning (avoid_default_addr_size): /example-0/usb/hub@1/device@2: Relying on default #size-cells value Documentation/devicetree/bindings/usb/realtek,rts5411.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size' Documentation/devicetree/bindings/usb/realtek,rts5411.example.dts:43.23-50.19: Warning (graph_port): /example-0/usb/hub@2/ports: graph port node name should be 'port' Documentation/devicetree/bindings/usb/realtek,rts5411.example.dts:46.28-49.23: Warning (graph_endpoint): /example-0/usb/hub@2/ports/port@0: graph endpoint node name should be 'endpoint' doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240210070934.2549994-4-swboyd@chromium.org The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml index f0784d2e86da..5480a31698be 100644 --- a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml +++ b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml @@ -21,6 +21,12 @@ properties: reg: true + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + vdd-supply: description: phandle to the regulator that provides power to the hub. @@ -30,6 +36,36 @@ properties: description: phandle to the peer hub on the controller. + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + 1st downstream facing USB port + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + 2nd downstream facing USB port + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + 3rd downstream facing USB port + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: + 4th downstream facing USB port + +patternProperties: + "^.*@[1-4]$": + description: The hard wired USB devices + type: object + $ref: /schemas/usb/usb-device.yaml + required: - peer-hub - compatible @@ -50,6 +86,11 @@ examples: reg = <1>; vdd-supply = <&pp3300_hub>; peer-hub = <&hub_3_0>; + /* USB 2.0 device on port 2 */ + device@2 { + compatible = "usb123,4567"; + reg = <2>; + }; }; /* 3.0 hub on port 2 */ @@ -58,5 +99,14 @@ examples: reg = <2>; vdd-supply = <&pp3300_hub>; peer-hub = <&hub_2_0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + remote-endpoint = <&usb_a0_ss>; + }; + }; }; };
Add a graph with 4 output endpoints to this hub binding to support the scenario where a downstream facing port is connected to a device that isn't a connector or a USB device with a VID:PID. This will be used to connect downstream facing ports to USB type-c switches so the USB superspeed and high speed lanes can be put onto USB connectors. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Conor Dooley <conor+dt@kernel.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: <linux-usb@vger.kernel.org> Cc: <devicetree@vger.kernel.org> Cc: Pin-yen Lin <treapking@chromium.org> Cc: maciek swiech <drmasquatch@google.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> --- .../bindings/usb/realtek,rts5411.yaml | 50 +++++++++++++++++++ 1 file changed, 50 insertions(+)