@@ -176,6 +176,16 @@ config SND_BCD2000
To compile this driver as a module, choose M here: the module
will be called snd-bcd2000.
+config SND_USB_QC_OFFLOAD_MIXER
+ bool "Qualcomm USB Audio Offload mixer control"
+ help
+ Say Y to enable the Qualcomm USB audio offloading mixer controls.
+ This exposes an USB offload capable kcontrol to signal to
+ applications about which platform sound card can support USB
+ audio offload. This can potentially be used to fetch further
+ information about the offloading status from the platform sound
+ card.
+
config SND_USB_AUDIO_QMI
tristate "Qualcomm Audio Offload driver"
depends on QCOM_QMI_HELPERS && SND_USB_AUDIO && USB_XHCI_SIDEBAND && SND_SOC_USB
@@ -1,2 +1,6 @@
snd-usb-audio-qmi-objs := usb_audio_qmi_v01.o qc_audio_offload.o
-obj-$(CONFIG_SND_USB_AUDIO_QMI) += snd-usb-audio-qmi.o
\ No newline at end of file
+obj-$(CONFIG_SND_USB_AUDIO_QMI) += snd-usb-audio-qmi.o
+
+ifneq ($(CONFIG_SND_USB_QC_OFFLOAD_MIXER),)
+snd-usb-audio-qmi-objs += mixer_usb_offload.o
+endif
\ No newline at end of file
new file mode 100644
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/usb.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/soc-usb.h>
+
+#include "../card.h"
+#include "../mixer.h"
+#include "../usbaudio.h"
+
+#include "mixer_usb_offload.h"
+
+static int
+snd_usb_offload_available_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct device *sysdev = snd_kcontrol_chip(kcontrol);
+ int ret;
+
+ ret = snd_soc_usb_device_offload_available(sysdev);
+ ucontrol->value.integer.value[0] = ret < 0 ? -1 : ret;
+
+ return ret < 0 ? ret : 0;
+}
+
+static int snd_usb_offload_available_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = -1;
+ uinfo->value.integer.max = SNDRV_CARDS;
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new snd_usb_offload_available_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_CARD,
+ .access = SNDRV_CTL_ELEM_ACCESS_READ,
+ .name = "USB Offload Playback Capable Card",
+ .info = snd_usb_offload_available_info,
+ .get = snd_usb_offload_available_get,
+};
+
+/**
+ * snd_usb_offload_create_ctl() - Add USB offload bounded mixer
+ * @chip - USB SND chip device
+ *
+ * Creates a sound control for a USB audio device, so that applications can
+ * query for if there is an available USB audio offload path, and which
+ * card is managing it.
+ */
+int snd_usb_offload_create_ctl(struct snd_usb_audio *chip)
+{
+ struct usb_device *udev = chip->dev;
+
+ return snd_ctl_add(chip->card,
+ snd_ctl_new1(&snd_usb_offload_available_ctl,
+ udev->bus->sysdev));
+}
new file mode 100644
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef __USB_OFFLOAD_MIXER_H
+#define __USB_OFFLOAD_MIXER_H
+
+#if IS_ENABLED(CONFIG_SND_USB_QC_OFFLOAD_MIXER)
+int snd_usb_offload_create_ctl(struct snd_usb_audio *chip);
+#else
+static inline int snd_usb_offload_create_ctl(struct snd_usb_audio *chip)
+{
+ return -ENODEV;
+}
+#endif
+#endif /* __USB_OFFLOAD_MIXER_H */
@@ -37,6 +37,7 @@
#include "../pcm.h"
#include "../power.h"
+#include "mixer_usb_offload.h"
#include "usb_audio_qmi_v01.h"
/* Stream disable request timeout during USB device disconnect */
@@ -1660,6 +1661,8 @@ static void qc_usb_audio_offload_probe(struct snd_usb_audio *chip)
uaudio_qdev->last_card_num = chip->card->number;
snd_soc_usb_connect(usb_get_usb_backend(udev), sdev);
+ snd_usb_offload_create_ctl(chip);
+
mutex_unlock(&chip->mutex);
mutex_unlock(&qdev_mutex);
In order to allow userspace/applications know about USB offloading status, expose a sound kcontrol that fetches information about which sound card index is associated with the ASoC platform card supporting offloading. In the USB audio offloading framework, the ASoC BE DAI link is the entity responsible for registering to the SOC USB layer. SOC USB will expose more details about the current offloading status, which includes the USB sound card and USB PCM device indexes currently being used. It is expected for the USB offloading driver to add the kcontrol to the sound card associated with the USB audio device. An example output would look like: tinymix -D 1 get 'USB Offload Playback Capable Card' 0 (range -1->32) Ths example signifies that card#0 has an USB offload capable path available. Change-Id: I1fe2d88f797e2991c2f1da78e37eaf73172e3ce3 Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> --- sound/usb/Kconfig | 10 +++++ sound/usb/qcom/Makefile | 6 ++- sound/usb/qcom/mixer_usb_offload.c | 65 ++++++++++++++++++++++++++++++ sound/usb/qcom/mixer_usb_offload.h | 17 ++++++++ sound/usb/qcom/qc_audio_offload.c | 3 ++ 5 files changed, 100 insertions(+), 1 deletion(-) create mode 100644 sound/usb/qcom/mixer_usb_offload.c create mode 100644 sound/usb/qcom/mixer_usb_offload.h