diff mbox series

usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error

Message ID 20240325094543.5362-1-Norihiko.Hama@alpsalpine.com (mailing list archive)
State Superseded
Headers show
Series usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error | expand

Commit Message

Norihiko Hama March 25, 2024, 9:45 a.m. UTC
When ncm function is working and then stop usb0 interface for link down,
eth_stop() is called. At this piont, accidentally if usb transport error
should happen in usb_ep_enable(), 'in_ep' and/or 'out_ep' may not be enabled.

After that, ncm_disable() is called to disable for ncm unbind
but gether_disconnect() is never called since 'in_ep' is not enabled.

As the result, ncm object is released in ncm unbind
but 'dev->port_usb' associated to 'ncm->port' is not NULL.

And when ncm bind again to recover netdev, ncm object is reallocated
but usb0 interface is already associated to previous released ncm object.

Therefore, once usb0 interface is up and eth_start_xmit() is called,
released ncm object is dereferrenced and it might cause use-after-free memory.

[function unlink via configfs]
usb0: eth_stop dev->port_usb=ffffff9b179c3200
--> error happens in usb_ep_enable().
NCM: ncm_disable: ncm=ffffff9b179c3200
--> no gether_disconnect() since ncm->port.in_ep->enabled is false.
NCM: ncm_unbind: ncm unbind ncm=ffffff9b179c3200
NCM: ncm_free: ncm free ncm=ffffff9b179c3200   <-- released ncm

[function link via configfs]
NCM: ncm_alloc: ncm alloc ncm=ffffff9ac4f8a000
NCM: ncm_bind: ncm bind ncm=ffffff9ac4f8a000
NCM: ncm_set_alt: ncm=ffffff9ac4f8a000 alt=0
usb0: eth_open dev->port_usb=ffffff9b179c3200  <-- previous released ncm
usb0: eth_start dev->port_usb=ffffff9b179c3200 <--

Unable to handle kernel paging request at virtual address dead00000000014f

This patch addresses the issue by checking if 'ncm->netdev' is not NULL at
ncm_disable() to call gether_disconnect() to deassociate 'dev->port_usb'.
It's more reasonable to check 'ncm->netdev' to call gether_connect/disconnect
rather than check 'ncm->port.in_ep->enabled' since it might not be enabled
but the gether connection might be established.

Signed-off-by: Norihiko Hama <Norihiko.Hama@alpsalpine.com>
---
 drivers/usb/gadget/function/f_ncm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Greg KH March 26, 2024, 9:36 a.m. UTC | #1
On Mon, Mar 25, 2024 at 06:45:43PM +0900, Norihiko Hama wrote:
> When ncm function is working and then stop usb0 interface for link down,
> eth_stop() is called. At this piont, accidentally if usb transport error
> should happen in usb_ep_enable(), 'in_ep' and/or 'out_ep' may not be enabled.
> 
> After that, ncm_disable() is called to disable for ncm unbind
> but gether_disconnect() is never called since 'in_ep' is not enabled.
> 
> As the result, ncm object is released in ncm unbind
> but 'dev->port_usb' associated to 'ncm->port' is not NULL.
> 
> And when ncm bind again to recover netdev, ncm object is reallocated
> but usb0 interface is already associated to previous released ncm object.
> 
> Therefore, once usb0 interface is up and eth_start_xmit() is called,
> released ncm object is dereferrenced and it might cause use-after-free memory.
> 
> [function unlink via configfs]
> usb0: eth_stop dev->port_usb=ffffff9b179c3200
> --> error happens in usb_ep_enable().
> NCM: ncm_disable: ncm=ffffff9b179c3200
> --> no gether_disconnect() since ncm->port.in_ep->enabled is false.
> NCM: ncm_unbind: ncm unbind ncm=ffffff9b179c3200
> NCM: ncm_free: ncm free ncm=ffffff9b179c3200   <-- released ncm
> 
> [function link via configfs]
> NCM: ncm_alloc: ncm alloc ncm=ffffff9ac4f8a000
> NCM: ncm_bind: ncm bind ncm=ffffff9ac4f8a000
> NCM: ncm_set_alt: ncm=ffffff9ac4f8a000 alt=0
> usb0: eth_open dev->port_usb=ffffff9b179c3200  <-- previous released ncm
> usb0: eth_start dev->port_usb=ffffff9b179c3200 <--
> 
> Unable to handle kernel paging request at virtual address dead00000000014f
> 
> This patch addresses the issue by checking if 'ncm->netdev' is not NULL at
> ncm_disable() to call gether_disconnect() to deassociate 'dev->port_usb'.
> It's more reasonable to check 'ncm->netdev' to call gether_connect/disconnect
> rather than check 'ncm->port.in_ep->enabled' since it might not be enabled
> but the gether connection might be established.
> 
> Signed-off-by: Norihiko Hama <Norihiko.Hama@alpsalpine.com>
> ---
>  drivers/usb/gadget/function/f_ncm.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
> index bd095ae569ed..23960cd16463 100644
> --- a/drivers/usb/gadget/function/f_ncm.c
> +++ b/drivers/usb/gadget/function/f_ncm.c
> @@ -888,7 +888,7 @@ static int ncm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
>  		if (alt > 1)
>  			goto fail;
>  
> -		if (ncm->port.in_ep->enabled) {
> +		if (ncm->netdev) {
>  			DBG(cdev, "reset ncm\n");
>  			ncm->netdev = NULL;
>  			gether_disconnect(&ncm->port);
> @@ -1365,7 +1365,7 @@ static void ncm_disable(struct usb_function *f)
>  
>  	DBG(cdev, "ncm deactivated\n");
>  
> -	if (ncm->port.in_ep->enabled) {
> +	if (ncm->netdev) {
>  		ncm->netdev = NULL;
>  		gether_disconnect(&ncm->port);
>  	}
> -- 
> 2.17.1
> 

What commit id does this change fix?

thanks,

greg k-h
Norihiko Hama March 26, 2024, 10:10 a.m. UTC | #2
> What commit id does this change fix?
I'm not sure.
I think that it's potential issue for long time.

Regards
Norihiko Hama
Greg KH March 26, 2024, 2:07 p.m. UTC | #3
On Tue, Mar 26, 2024 at 10:10:04AM +0000, Norihiko Hama wrote:
> > What commit id does this change fix?
> I'm not sure.
> I think that it's potential issue for long time.

Then please mark it as such when you resubmit it.

thanks,

greg k-h
diff mbox series

Patch

diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
index bd095ae569ed..23960cd16463 100644
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -888,7 +888,7 @@  static int ncm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 		if (alt > 1)
 			goto fail;
 
-		if (ncm->port.in_ep->enabled) {
+		if (ncm->netdev) {
 			DBG(cdev, "reset ncm\n");
 			ncm->netdev = NULL;
 			gether_disconnect(&ncm->port);
@@ -1365,7 +1365,7 @@  static void ncm_disable(struct usb_function *f)
 
 	DBG(cdev, "ncm deactivated\n");
 
-	if (ncm->port.in_ep->enabled) {
+	if (ncm->netdev) {
 		ncm->netdev = NULL;
 		gether_disconnect(&ncm->port);
 	}