diff mbox series

[1/2] usb: xhci: correct return value in case of STS_HCE

Message ID 20240404121106.2842417-2-mathias.nyman@linux.intel.com (mailing list archive)
State Superseded
Commit 5bfc311dd6c376d350b39028b9000ad766ddc934
Headers show
Series xhci fixes for usb-linus | expand

Commit Message

Mathias Nyman April 4, 2024, 12:11 p.m. UTC 
From: Oliver Neukum <oneukum@suse.com>

If we get STS_HCE we give up on the interrupt, but for the purpose
of IRQ handling that still counts as ours. We may return IRQ_NONE
only if we are positive that it wasn't ours. Hence correct the default.

Fixes: 2a25e66d676d ("xhci: print warning when HCE was set")
Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-ring.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 52278afea94b..575f0fd9c9f1 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3133,7 +3133,7 @@  static int xhci_handle_events(struct xhci_hcd *xhci, struct xhci_interrupter *ir
 irqreturn_t xhci_irq(struct usb_hcd *hcd)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-	irqreturn_t ret = IRQ_NONE;
+	irqreturn_t ret = IRQ_HANDLED;
 	u32 status;
 
 	spin_lock(&xhci->lock);
@@ -3141,12 +3141,13 @@  irqreturn_t xhci_irq(struct usb_hcd *hcd)
 	status = readl(&xhci->op_regs->status);
 	if (status == ~(u32)0) {
 		xhci_hc_died(xhci);
-		ret = IRQ_HANDLED;
 		goto out;
 	}
 
-	if (!(status & STS_EINT))
+	if (!(status & STS_EINT)) {
+		ret = IRQ_NONE;
 		goto out;
+	}
 
 	if (status & STS_HCE) {
 		xhci_warn(xhci, "WARNING: Host Controller Error\n");
@@ -3156,7 +3157,6 @@  irqreturn_t xhci_irq(struct usb_hcd *hcd)
 	if (status & STS_FATAL) {
 		xhci_warn(xhci, "WARNING: Host System Error\n");
 		xhci_halt(xhci);
-		ret = IRQ_HANDLED;
 		goto out;
 	}
 
@@ -3167,7 +3167,6 @@  irqreturn_t xhci_irq(struct usb_hcd *hcd)
 	 */
 	status |= STS_EINT;
 	writel(status, &xhci->op_regs->status);
-	ret = IRQ_HANDLED;
 
 	/* This is the handler of the primary interrupter */
 	xhci_handle_events(xhci, xhci->interrupters[0]);