diff mbox series

[1/2,v3] USB: serial: option: add Lonsung U8300/U9300 product

Message ID 20240415142625.1756740-1-coiaprant@gmail.com (mailing list archive)
State New
Headers show
Series [1/2,v3] USB: serial: option: add Lonsung U8300/U9300 product | expand

Commit Message

Coia Prant April 15, 2024, 2:26 p.m. UTC 
Update the USB serial option driver to support Longsung U8300/U9300.

For U8300

Interface 4 is used by for QMI interface in stock firmware of U8300, the
router which uses U8300 modem. Free the interface up, to rebind it to
qmi_wwan driver.
Interface 5 is used by for ADB interface in stock firmware of U8300, the
router which uses U8300 modem. Free the interface up.
The proper configuration is:

Interface mapping is:
0: unknown (Debug), 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI, 5: ADB

T:  Bus=05 Lev=01 Prnt=03 Port=02 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1c9e ProdID=9b05 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
C:  #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

For U9300

Interface 1 is used by for ADB interface in stock firmware of U9300, the
router which uses U9300 modem. Free the interface up.
Interface 4 is used by for QMI interface in stock firmware of U9300, the
router which uses U9300 modem. Free the interface up, to rebind it to
qmi_wwan driver.
The proper configuration is:

Interface mapping is:
0: ADB, 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI

Note: Interface 3 of some models of the U9300 series can send AT commands.

T:  Bus=05 Lev=01 Prnt=05 Port=04 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1c9e ProdID=9b3c Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
C:  #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms

Tested successfully using Modem Manager on U9300.
Tested successfully AT commands using If=1, If=2 and If=3 on U9300.

Signed-off-by: Coia Prant <coiaprant@gmail.com>
Reviewed-by: Lars Melin <larsm17@gmail.com>
Cc: stable@vger.kernel.org
Cc: netdev@vger.kernel.org
---
 drivers/usb/serial/option.c | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

patchwork-bot+netdevbpf@kernel.org April 18, 2024, 1:30 a.m. UTC | #1 
Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:

On Mon, 15 Apr 2024 07:26:25 -0700 you wrote:
> Update the USB serial option driver to support Longsung U8300/U9300.
> 
> For U8300
> 
> Interface 4 is used by for QMI interface in stock firmware of U8300, the
> router which uses U8300 modem. Free the interface up, to rebind it to
> qmi_wwan driver.
> Interface 5 is used by for ADB interface in stock firmware of U8300, the
> router which uses U8300 modem. Free the interface up.
> The proper configuration is:
> 
> [...]

Here is the summary with links:
  - [1/2,v3] USB: serial: option: add Lonsung U8300/U9300 product
    (no matching commit)
  - [2/2,v3] net: usb: qmi_wwan: add Lonsung U8300/U9300 product
    https://git.kernel.org/netdev/net-next/c/bc1b7f02c8fe

You are awesome, thank you!
Johan Hovold April 18, 2024, 7:23 a.m. UTC | #2 
On Mon, Apr 15, 2024 at 07:26:25AM -0700, Coia Prant wrote:
> Update the USB serial option driver to support Longsung U8300/U9300.

> Signed-off-by: Coia Prant <coiaprant@gmail.com>
> Reviewed-by: Lars Melin <larsm17@gmail.com>
> Cc: stable@vger.kernel.org
> Cc: netdev@vger.kernel.org
> ---

Thanks for the update. Next time, remember to include a short changelog
here when revising a patch.

>  drivers/usb/serial/option.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index 55a65d941ccb..27a116901459 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -412,6 +412,10 @@ static void option_instat_callback(struct urb *urb);
>   */
>  #define LONGCHEER_VENDOR_ID			0x1c9e
>  
> +/* Longsung products */
> +#define LONGSUNG_U8300_PRODUCT_ID		0x9b05
> +#define LONGSUNG_U9300_PRODUCT_ID		0x9b3c
> +
>  /* 4G Systems products */
>  /* This one was sold as the VW and Skoda "Carstick LTE" */
>  #define FOUR_G_SYSTEMS_PRODUCT_CARSTICK_LTE	0x7605
> @@ -2054,6 +2058,10 @@ static const struct usb_device_id option_ids[] = {
>  	  .driver_info = RSVD(4) },
>  	{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
>  	{ USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
> +	{ USB_DEVICE(LONGCHEER_VENDOR_ID, LONGSUNG_U8300_PRODUCT_ID),
> +	  .driver_info = RSVD(4) | RSVD(5) },
> +	{ USB_DEVICE(LONGCHEER_VENDOR_ID, LONGSUNG_U9300_PRODUCT_ID),
> +	  .driver_info = RSVD(0) | RSVD(4) },

I dropped the product defines in favour of a comment (as they don't
really add any value and we don't have to worry about keeping the
defines sorted).

I also trimmed the commit message slightly before applying.

The end-result is here:

	https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial.git/commit/?h=usb-linus&id=cf16ffa17c398434a77b8a373e69287c95b60de2

Johan
diff mbox series

Patch

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 55a65d941ccb..27a116901459 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -412,6 +412,10 @@  static void option_instat_callback(struct urb *urb);
  */
 #define LONGCHEER_VENDOR_ID			0x1c9e
 
+/* Longsung products */
+#define LONGSUNG_U8300_PRODUCT_ID		0x9b05
+#define LONGSUNG_U9300_PRODUCT_ID		0x9b3c
+
 /* 4G Systems products */
 /* This one was sold as the VW and Skoda "Carstick LTE" */
 #define FOUR_G_SYSTEMS_PRODUCT_CARSTICK_LTE	0x7605
@@ -2054,6 +2058,10 @@  static const struct usb_device_id option_ids[] = {
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
+	{ USB_DEVICE(LONGCHEER_VENDOR_ID, LONGSUNG_U8300_PRODUCT_ID),
+	  .driver_info = RSVD(4) | RSVD(5) },
+	{ USB_DEVICE(LONGCHEER_VENDOR_ID, LONGSUNG_U9300_PRODUCT_ID),
+	  .driver_info = RSVD(0) | RSVD(4) },
 	{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HAIER_VENDOR_ID, HAIER_PRODUCT_CE81B, 0xff, 0xff, 0xff) },
 	/* Pirelli  */