usb: host: oxu210hp: remove unused struct 'ehci_dbg_port'

Commit Message

Dr. David Alan Gilbert May 29, 2024, 9 p.m. UTC

From: "Dr. David Alan Gilbert" <[e-mail]>

'ehci_dbg_port' is unused in oxu210hp-hcd.c since it's original
commit b92a78e582b1 ("usb host: Oxford OXU210HP HCD driver.")
when it was in a separate header.

Remove it.

Note, that this structure, and some others in the driver
are mostly clones of include/linux/usb/ehci_def.h.
Someone with the hardware to be able to test it might
be able to remove a lot more structs as well and just
use that header.

Signed-off-by: Dr. David Alan Gilbert <[e-mail]>
---
 drivers/usb/host/oxu210hp-hcd.c | 25 -------------------------
 1 file changed, 25 deletions(-)

Patch

diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index d467472f9d3c..3f871fe62b90 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -196,31 +196,6 @@  struct ehci_regs {
 #define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
 } __packed;
 
-/* Appendix C, Debug port ... intended for use with special "debug devices"
- * that can help if there's no serial console.  (nonstandard enumeration.)
- */
-struct ehci_dbg_port {
-	u32	control;
-#define DBGP_OWNER	(1<<30)
-#define DBGP_ENABLED	(1<<28)
-#define DBGP_DONE	(1<<16)
-#define DBGP_INUSE	(1<<10)
-#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
-#	define DBGP_ERR_BAD	1
-#	define DBGP_ERR_SIGNAL	2
-#define DBGP_ERROR	(1<<6)
-#define DBGP_GO		(1<<5)
-#define DBGP_OUT	(1<<4)
-#define DBGP_LEN(x)	(((x)>>0)&0x0f)
-	u32	pids;
-#define DBGP_PID_GET(x)		(((x)>>16)&0xff)
-#define DBGP_PID_SET(data, tok)	(((data)<<8)|(tok))
-	u32	data03;
-	u32	data47;
-	u32	address;
-#define DBGP_EPADDR(dev, ep)	(((dev)<<8)|(ep))
-} __packed;
-
 #define	QTD_NEXT(dma)	cpu_to_le32((u32)dma)
 
 /*