diff mbox series

[02/47] arm64: dts: qcom: qcs9100: Introduce QCS9100 SoC dtsi

Message ID 20240703025850.2172008-3-quic_tengfan@quicinc.com (mailing list archive)
State New
Headers show
Series arm64: qcom: dts: add QCS9100 support | expand

Commit Message

Tengfei Fan July 3, 2024, 2:58 a.m. UTC
Introduce QCS9100 SoC dtsi, QCS9100 is mainly used in IoT products.
QCS9100 is drived from SA8775p.
The current QCS9100 SoC dtsi is directly renamed from the SA8775p SoC
dtsi.
The QCS9100 platform is currently in the early design stage. Currently,
Both the QCS9100 platform and SA8775p platform use non-SCMI resources,
In the future, the SA8775p platform will transition to using SCMI
resources and it will have new sa8775p-related device tree.
This QCS9100 SoC dtsi remains consistent with the current SA8775p SoC
dtsi, except for updating the following sa8775p-related compatible names
to the qcs9100-related compatible name:
  - qcom,sa8775p-clk-virt
  - qcom,sa8775p-mc-virt
  - qcom,sa8775p-adsp-pas
  - qcom,sa8775p-cdsp-pas
  - qcom,sa8775p-cdsp1-pas
  - qcom,sa8775p-gpdsp0-pas
  - qcom,sa8775p-gpdsp1-pas
  - qcom,sa8775p-gcc
  - qcom,sa8775p-ipcc
  - qcom,sa8775p-config-noc
  - qcom,sa8775p-system-noc
  - qcom,sa8775p-aggre1-noc
  - qcom,sa8775p-aggre2-noc
  - qcom,sa8775p-pcie-anoc
  - qcom,sa8775p-gpdsp-anoc
  - qcom,sa8775p-mmss-noc
  - qcom,sa8775p-trng
  - qcom,sa8775p-ufshc
  - qcom,sa8775p-qmp-ufs-phy
  - qcom,sa8775p-qce
  - qcom,sa8775p-lpass-ag-noc
  - qcom,sa8775p-usb-hs-phy
  - qcom,sa8775p-dc-noc
  - qcom,sa8775p-gem-noc
  - qcom,sa8775p-dwc3
  - qcom,sa8775p-qmp-usb3-uni-phy
  - qcom,sa8775p-gpucc
  - qcom,sa8775p-smmu-500
  - qcom,sa8775p-dwmac-sgmii-phy
  - qcom,sa8775p-llcc-bwmon
  - qcom,sa8775p-cpu-bwmon
  - qcom,sa8775p-llcc
  - qcom,sa8775p-videocc
  - qcom,sa8775p-camcc
  - qcom,sa8775p-dispcc0
  - qcom,sa8775p-pdc
  - qcom,sa8775p-aoss-qmp
  - qcom,sa8775p-tlmm
  - qcom,sa8775p-imem
  - qcom,sa8775p-smmu-500
  - qcom,sa8775p-rpmh-clk
  - qcom,sa8775p-rpmhpd
  - qcom,sa8775p-cpufreq-epss
  - qcom,sa8775p-dispcc1
  - qcom,sa8775p-ethqos
  - qcom,sa8775p-nspa-noc
  - qcom,sa8775p-nspb-noc
  - qcom,sa8775p-qmp-gen4x2-pcie-phy
  - qcom,sa8775p-qmp-gen4x4-pcie-phy

Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
 .../dts/qcom/{sa8775p.dtsi => qcs9100.dtsi}   | 112 +++++++++---------
 1 file changed, 56 insertions(+), 56 deletions(-)
 rename arch/arm64/boot/dts/qcom/{sa8775p.dtsi => qcs9100.dtsi} (97%)

Comments

Krzysztof Kozlowski July 3, 2024, 4:40 a.m. UTC | #1
On 03/07/2024 04:58, Tengfei Fan wrote:
> Introduce QCS9100 SoC dtsi, QCS9100 is mainly used in IoT products.
> QCS9100 is drived from SA8775p.
> The current QCS9100 SoC dtsi is directly renamed from the SA8775p SoC
> dtsi.
> The QCS9100 platform is currently in the early design stage. Currently,
> Both the QCS9100 platform and SA8775p platform use non-SCMI resources,
> In the future, the SA8775p platform will transition to using SCMI
> resources and it will have new sa8775p-related device tree.
> This QCS9100 SoC dtsi remains consistent with the current SA8775p SoC
> dtsi, except for updating the following sa8775p-related compatible names
> to the qcs9100-related compatible name:
>   - qcom,sa8775p-clk-virt
>   - qcom,sa8775p-mc-virt
>   - qcom,sa8775p-adsp-pas
>   - qcom,sa8775p-cdsp-pas
>   - qcom,sa8775p-cdsp1-pas
>   - qcom,sa8775p-gpdsp0-pas
>   - qcom,sa8775p-gpdsp1-pas
>   - qcom,sa8775p-gcc
>   - qcom,sa8775p-ipcc
>   - qcom,sa8775p-config-noc
>   - qcom,sa8775p-system-noc
>   - qcom,sa8775p-aggre1-noc
>   - qcom,sa8775p-aggre2-noc
>   - qcom,sa8775p-pcie-anoc
>   - qcom,sa8775p-gpdsp-anoc
>   - qcom,sa8775p-mmss-noc
>   - qcom,sa8775p-trng
>   - qcom,sa8775p-ufshc
>   - qcom,sa8775p-qmp-ufs-phy
>   - qcom,sa8775p-qce
>   - qcom,sa8775p-lpass-ag-noc
>   - qcom,sa8775p-usb-hs-phy
>   - qcom,sa8775p-dc-noc
>   - qcom,sa8775p-gem-noc
>   - qcom,sa8775p-dwc3
>   - qcom,sa8775p-qmp-usb3-uni-phy
>   - qcom,sa8775p-gpucc
>   - qcom,sa8775p-smmu-500
>   - qcom,sa8775p-dwmac-sgmii-phy
>   - qcom,sa8775p-llcc-bwmon
>   - qcom,sa8775p-cpu-bwmon
>   - qcom,sa8775p-llcc
>   - qcom,sa8775p-videocc
>   - qcom,sa8775p-camcc
>   - qcom,sa8775p-dispcc0
>   - qcom,sa8775p-pdc
>   - qcom,sa8775p-aoss-qmp
>   - qcom,sa8775p-tlmm
>   - qcom,sa8775p-imem
>   - qcom,sa8775p-smmu-500
>   - qcom,sa8775p-rpmh-clk
>   - qcom,sa8775p-rpmhpd
>   - qcom,sa8775p-cpufreq-epss
>   - qcom,sa8775p-dispcc1
>   - qcom,sa8775p-ethqos
>   - qcom,sa8775p-nspa-noc
>   - qcom,sa8775p-nspb-noc
>   - qcom,sa8775p-qmp-gen4x2-pcie-phy
>   - qcom,sa8775p-qmp-gen4x4-pcie-phy
> 
> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
> ---
>  .../dts/qcom/{sa8775p.dtsi => qcs9100.dtsi}   | 112 +++++++++---------
>  1 file changed, 56 insertions(+), 56 deletions(-)
>  rename arch/arm64/boot/dts/qcom/{sa8775p.dtsi => qcs9100.dtsi} (97%)
> 

How do any things compile at this point? Please squash the patches. Your
patchset must be bisectable at build level (dtschema validation does not
have to).

Best regards,
Krzysztof
Tengfei Fan July 3, 2024, 9:23 a.m. UTC | #2
On 7/3/2024 12:40 PM, Krzysztof Kozlowski wrote:
> On 03/07/2024 04:58, Tengfei Fan wrote:
>> Introduce QCS9100 SoC dtsi, QCS9100 is mainly used in IoT products.
>> QCS9100 is drived from SA8775p.
>> The current QCS9100 SoC dtsi is directly renamed from the SA8775p SoC
>> dtsi.
>> The QCS9100 platform is currently in the early design stage. Currently,
>> Both the QCS9100 platform and SA8775p platform use non-SCMI resources,
>> In the future, the SA8775p platform will transition to using SCMI
>> resources and it will have new sa8775p-related device tree.
>> This QCS9100 SoC dtsi remains consistent with the current SA8775p SoC
>> dtsi, except for updating the following sa8775p-related compatible names
>> to the qcs9100-related compatible name:
>>    - qcom,sa8775p-clk-virt
>>    - qcom,sa8775p-mc-virt
>>    - qcom,sa8775p-adsp-pas
>>    - qcom,sa8775p-cdsp-pas
>>    - qcom,sa8775p-cdsp1-pas
>>    - qcom,sa8775p-gpdsp0-pas
>>    - qcom,sa8775p-gpdsp1-pas
>>    - qcom,sa8775p-gcc
>>    - qcom,sa8775p-ipcc
>>    - qcom,sa8775p-config-noc
>>    - qcom,sa8775p-system-noc
>>    - qcom,sa8775p-aggre1-noc
>>    - qcom,sa8775p-aggre2-noc
>>    - qcom,sa8775p-pcie-anoc
>>    - qcom,sa8775p-gpdsp-anoc
>>    - qcom,sa8775p-mmss-noc
>>    - qcom,sa8775p-trng
>>    - qcom,sa8775p-ufshc
>>    - qcom,sa8775p-qmp-ufs-phy
>>    - qcom,sa8775p-qce
>>    - qcom,sa8775p-lpass-ag-noc
>>    - qcom,sa8775p-usb-hs-phy
>>    - qcom,sa8775p-dc-noc
>>    - qcom,sa8775p-gem-noc
>>    - qcom,sa8775p-dwc3
>>    - qcom,sa8775p-qmp-usb3-uni-phy
>>    - qcom,sa8775p-gpucc
>>    - qcom,sa8775p-smmu-500
>>    - qcom,sa8775p-dwmac-sgmii-phy
>>    - qcom,sa8775p-llcc-bwmon
>>    - qcom,sa8775p-cpu-bwmon
>>    - qcom,sa8775p-llcc
>>    - qcom,sa8775p-videocc
>>    - qcom,sa8775p-camcc
>>    - qcom,sa8775p-dispcc0
>>    - qcom,sa8775p-pdc
>>    - qcom,sa8775p-aoss-qmp
>>    - qcom,sa8775p-tlmm
>>    - qcom,sa8775p-imem
>>    - qcom,sa8775p-smmu-500
>>    - qcom,sa8775p-rpmh-clk
>>    - qcom,sa8775p-rpmhpd
>>    - qcom,sa8775p-cpufreq-epss
>>    - qcom,sa8775p-dispcc1
>>    - qcom,sa8775p-ethqos
>>    - qcom,sa8775p-nspa-noc
>>    - qcom,sa8775p-nspb-noc
>>    - qcom,sa8775p-qmp-gen4x2-pcie-phy
>>    - qcom,sa8775p-qmp-gen4x4-pcie-phy
>>
>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>> ---
>>   .../dts/qcom/{sa8775p.dtsi => qcs9100.dtsi}   | 112 +++++++++---------
>>   1 file changed, 56 insertions(+), 56 deletions(-)
>>   rename arch/arm64/boot/dts/qcom/{sa8775p.dtsi => qcs9100.dtsi} (97%)
>>
> 
> How do any things compile at this point? Please squash the patches. Your
> patchset must be bisectable at build level (dtschema validation does not
> have to).
> 
> Best regards,
> Krzysztof
> 

The compilation issue indeed arises when applying only this single 
patch. In the new version patch series, I plan to consolidate the three 
patches that rename sa8775p.dtsi to qcs9100.dtsi, sa8775p-pmics.dtsi to 
qcs9100-pmics.dtsi, and sa87750-ride.dts to qcs9100-ride.dts into a 
single patch.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/qcs9100.dtsi
similarity index 97%
rename from arch/arm64/boot/dts/qcom/sa8775p.dtsi
rename to arch/arm64/boot/dts/qcom/qcs9100.dtsi
index 23f1b2e5e624..1c257287af0c 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs9100.dtsi
@@ -220,91 +220,91 @@  eud_in: endpoint {
 
 	firmware {
 		scm {
-			compatible = "qcom,scm-sa8775p", "qcom,scm";
+			compatible = "qcom,scm-qcs9100", "qcom,scm";
 			memory-region = <&tz_ffi_mem>;
 		};
 	};
 
 	aggre1_noc: interconnect-aggre1-noc {
-		compatible = "qcom,sa8775p-aggre1-noc";
+		compatible = "qcom,qcs9100-aggre1-noc";
 		#interconnect-cells = <2>;
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
 	aggre2_noc: interconnect-aggre2-noc {
-		compatible = "qcom,sa8775p-aggre2-noc";
+		compatible = "qcom,qcs9100-aggre2-noc";
 		#interconnect-cells = <2>;
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
 	clk_virt: interconnect-clk-virt {
-		compatible = "qcom,sa8775p-clk-virt";
+		compatible = "qcom,qcs9100-clk-virt";
 		#interconnect-cells = <2>;
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
 	config_noc: interconnect-config-noc {
-		compatible = "qcom,sa8775p-config-noc";
+		compatible = "qcom,qcs9100-config-noc";
 		#interconnect-cells = <2>;
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
 	dc_noc: interconnect-dc-noc {
-		compatible = "qcom,sa8775p-dc-noc";
+		compatible = "qcom,qcs9100-dc-noc";
 		#interconnect-cells = <2>;
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
 	gem_noc: interconnect-gem-noc {
-		compatible = "qcom,sa8775p-gem-noc";
+		compatible = "qcom,qcs9100-gem-noc";
 		#interconnect-cells = <2>;
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
 	gpdsp_anoc: interconnect-gpdsp-anoc {
-		compatible = "qcom,sa8775p-gpdsp-anoc";
+		compatible = "qcom,qcs9100-gpdsp-anoc";
 		#interconnect-cells = <2>;
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
 	lpass_ag_noc: interconnect-lpass-ag-noc {
-		compatible = "qcom,sa8775p-lpass-ag-noc";
+		compatible = "qcom,qcs9100-lpass-ag-noc";
 		#interconnect-cells = <2>;
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
 	mc_virt: interconnect-mc-virt {
-		compatible = "qcom,sa8775p-mc-virt";
+		compatible = "qcom,qcs9100-mc-virt";
 		#interconnect-cells = <2>;
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
 	mmss_noc: interconnect-mmss-noc {
-		compatible = "qcom,sa8775p-mmss-noc";
+		compatible = "qcom,qcs9100-mmss-noc";
 		#interconnect-cells = <2>;
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
 	nspa_noc: interconnect-nspa-noc {
-		compatible = "qcom,sa8775p-nspa-noc";
+		compatible = "qcom,qcs9100-nspa-noc";
 		#interconnect-cells = <2>;
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
 	nspb_noc: interconnect-nspb-noc {
-		compatible = "qcom,sa8775p-nspb-noc";
+		compatible = "qcom,qcs9100-nspb-noc";
 		#interconnect-cells = <2>;
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
 	pcie_anoc: interconnect-pcie-anoc {
-		compatible = "qcom,sa8775p-pcie-anoc";
+		compatible = "qcom,qcs9100-pcie-anoc";
 		#interconnect-cells = <2>;
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
 	system_noc: interconnect-system-noc {
-		compatible = "qcom,sa8775p-system-noc";
+		compatible = "qcom,qcs9100-system-noc";
 		#interconnect-cells = <2>;
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
@@ -571,7 +571,7 @@  soc: soc@0 {
 		ranges = <0 0 0 0 0x10 0>;
 
 		gcc: clock-controller@100000 {
-			compatible = "qcom,sa8775p-gcc";
+			compatible = "qcom,qcs9100-gcc";
 			reg = <0x0 0x00100000 0x0 0xc7018>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -595,7 +595,7 @@  gcc: clock-controller@100000 {
 		};
 
 		ipcc: mailbox@408000 {
-			compatible = "qcom,sa8775p-ipcc", "qcom,ipcc";
+			compatible = "qcom,qcs9100-ipcc", "qcom,ipcc";
 			reg = <0x0 0x00408000 0x0 0x1000>;
 			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
@@ -1593,12 +1593,12 @@  &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
 		};
 
 		rng: rng@10d2000 {
-			compatible = "qcom,sa8775p-trng", "qcom,trng";
+			compatible = "qcom,qcs9100-trng", "qcom,trng";
 			reg = <0 0x010d2000 0 0x1000>;
 		};
 
 		ufs_mem_hc: ufs@1d84000 {
-			compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			compatible = "qcom,qcs9100-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x0 0x01d84000 0x0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&ufs_mem_phy>;
@@ -1640,7 +1640,7 @@  ufs_mem_hc: ufs@1d84000 {
 		};
 
 		ufs_mem_phy: phy@1d87000 {
-			compatible = "qcom,sa8775p-qmp-ufs-phy";
+			compatible = "qcom,qcs9100-qmp-ufs-phy";
 			reg = <0x0 0x01d87000 0x0 0xe10>;
 			/*
 			 * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It
@@ -1658,7 +1658,7 @@  ufs_mem_phy: phy@1d87000 {
 		};
 
 		ice: crypto@1d88000 {
-			compatible = "qcom,sa8775p-inline-crypto-engine",
+			compatible = "qcom,qcs9100-inline-crypto-engine",
 				     "qcom,inline-crypto-engine";
 			reg = <0x0 0x01d88000 0x0 0x8000>;
 			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
@@ -2578,7 +2578,7 @@  apss_tpdm2_out: endpoint {
 		};
 
 		usb_0_hsphy: phy@88e4000 {
-			compatible = "qcom,sa8775p-usb-hs-phy",
+			compatible = "qcom,qcs9100-usb-hs-phy",
 				     "qcom,usb-snps-hs-5nm-phy";
 			reg = <0 0x088e4000 0 0x120>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
@@ -2591,7 +2591,7 @@  usb_0_hsphy: phy@88e4000 {
 		};
 
 		usb_0_qmpphy: phy@88e8000 {
-			compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
+			compatible = "qcom,qcs9100-qmp-usb3-uni-phy";
 			reg = <0 0x088e8000 0 0x2000>;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
@@ -2615,7 +2615,7 @@  usb_0_qmpphy: phy@88e8000 {
 		};
 
 		usb_0: usb@a6f8800 {
-			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
+			compatible = "qcom,qcs9100-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -2667,7 +2667,7 @@  usb_0_dwc3: usb@a600000 {
 		};
 
 		usb_1_hsphy: phy@88e6000 {
-			compatible = "qcom,sa8775p-usb-hs-phy",
+			compatible = "qcom,qcs9100-usb-hs-phy",
 				     "qcom,usb-snps-hs-5nm-phy";
 			reg = <0 0x088e6000 0 0x120>;
 			clocks = <&gcc GCC_USB_CLKREF_EN>;
@@ -2680,7 +2680,7 @@  usb_1_hsphy: phy@88e6000 {
 		};
 
 		usb_1_qmpphy: phy@88ea000 {
-			compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
+			compatible = "qcom,qcs9100-qmp-usb3-uni-phy";
 			reg = <0 0x088ea000 0 0x2000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
@@ -2704,7 +2704,7 @@  usb_1_qmpphy: phy@88ea000 {
 		};
 
 		usb_1: usb@a8f8800 {
-			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
+			compatible = "qcom,qcs9100-dwc3", "qcom,dwc3";
 			reg = <0 0x0a8f8800 0 0x400>;
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -2756,7 +2756,7 @@  usb_1_dwc3: usb@a800000 {
 		};
 
 		usb_2_hsphy: phy@88e7000 {
-			compatible = "qcom,sa8775p-usb-hs-phy",
+			compatible = "qcom,qcs9100-usb-hs-phy",
 				     "qcom,usb-snps-hs-5nm-phy";
 			reg = <0 0x088e7000 0 0x120>;
 			clocks = <&gcc GCC_USB_CLKREF_EN>;
@@ -2769,7 +2769,7 @@  usb_2_hsphy: phy@88e7000 {
 		};
 
 		usb_2: usb@a4f8800 {
-			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
+			compatible = "qcom,qcs9100-dwc3", "qcom,dwc3";
 			reg = <0 0x0a4f8800 0 0x400>;
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -2825,7 +2825,7 @@  tcsr_mutex: hwlock@1f40000 {
 		};
 
 		gpucc: clock-controller@3d90000 {
-			compatible = "qcom,sa8775p-gpucc";
+			compatible = "qcom,qcs9100-gpucc";
 			reg = <0x0 0x03d90000 0x0 0xa000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
@@ -2839,7 +2839,7 @@  gpucc: clock-controller@3d90000 {
 		};
 
 		adreno_smmu: iommu@3da0000 {
-			compatible = "qcom,sa8775p-smmu-500", "qcom,adreno-smmu",
+			compatible = "qcom,qcs9100-smmu-500", "qcom,adreno-smmu",
 				     "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x0 0x03da0000 0x0 0x20000>;
 			#iommu-cells = <2>;
@@ -2875,7 +2875,7 @@  adreno_smmu: iommu@3da0000 {
 		};
 
 		serdes0: phy@8901000 {
-			compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+			compatible = "qcom,qcs9100-dwmac-sgmii-phy";
 			reg = <0x0 0x08901000 0x0 0xe10>;
 			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
 			clock-names = "sgmi_ref";
@@ -2884,7 +2884,7 @@  serdes0: phy@8901000 {
 		};
 
 		serdes1: phy@8902000 {
-			compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+			compatible = "qcom,qcs9100-dwmac-sgmii-phy";
 			reg = <0x0 0x08902000 0x0 0xe10>;
 			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
 			clock-names = "sgmi_ref";
@@ -2893,7 +2893,7 @@  serdes1: phy@8902000 {
 		};
 
 		llcc: system-cache-controller@9200000 {
-			compatible = "qcom,sa8775p-llcc";
+			compatible = "qcom,qcs9100-llcc";
 			reg = <0x0 0x09200000 0x0 0x80000>,
 			      <0x0 0x09300000 0x0 0x80000>,
 			      <0x0 0x09400000 0x0 0x80000>,
@@ -2912,7 +2912,7 @@  llcc: system-cache-controller@9200000 {
 		};
 
 		pdc: interrupt-controller@b220000 {
-			compatible = "qcom,sa8775p-pdc", "qcom,pdc";
+			compatible = "qcom,qcs9100-pdc", "qcom,pdc";
 			reg = <0x0 0x0b220000 0x0 0x30000>,
 			      <0x0 0x17c000f0 0x0 0x64>;
 			qcom,pdc-ranges = <0 480 40>,
@@ -2959,7 +2959,7 @@  pdc: interrupt-controller@b220000 {
 		};
 
 		tsens2: thermal-sensor@c251000 {
-			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			compatible = "qcom,qcs9100-tsens", "qcom,tsens-v2";
 			reg = <0x0 0x0c251000 0x0 0x1ff>,
 			      <0x0 0x0c224000 0x0 0x8>;
 			interrupts = <GIC_SPI 572 IRQ_TYPE_LEVEL_HIGH>,
@@ -2970,7 +2970,7 @@  tsens2: thermal-sensor@c251000 {
 		};
 
 		tsens3: thermal-sensor@c252000 {
-			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			compatible = "qcom,qcs9100-tsens", "qcom,tsens-v2";
 			reg = <0x0 0x0c252000 0x0 0x1ff>,
 			      <0x0 0x0c225000 0x0 0x8>;
 			interrupts = <GIC_SPI 573 IRQ_TYPE_LEVEL_HIGH>,
@@ -2981,7 +2981,7 @@  tsens3: thermal-sensor@c252000 {
 		};
 
 		tsens0: thermal-sensor@c263000 {
-			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			compatible = "qcom,qcs9100-tsens", "qcom,tsens-v2";
 			reg = <0x0 0x0c263000 0x0 0x1ff>,
 			      <0x0 0x0c222000 0x0 0x8>;
 			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
@@ -2992,7 +2992,7 @@  tsens0: thermal-sensor@c263000 {
 		};
 
 		tsens1: thermal-sensor@c265000 {
-			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			compatible = "qcom,qcs9100-tsens", "qcom,tsens-v2";
 			reg = <0x0 0x0c265000 0x0 0x1ff>,
 			      <0x0 0x0c223000 0x0 0x8>;
 			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
@@ -3003,7 +3003,7 @@  tsens1: thermal-sensor@c265000 {
 		};
 
 		aoss_qmp: power-management@c300000 {
-			compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp";
+			compatible = "qcom,qcs9100-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x400>;
 			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
 					       IPCC_MPROC_SIGNAL_GLINK_QMP
@@ -3040,7 +3040,7 @@  spmi_bus: spmi@c440000 {
 		};
 
 		tlmm: pinctrl@f000000 {
-			compatible = "qcom,sa8775p-tlmm";
+			compatible = "qcom,qcs9100-tlmm";
 			reg = <0x0 0x0f000000 0x0 0x1000000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -3052,7 +3052,7 @@  tlmm: pinctrl@f000000 {
 		};
 
 		sram: sram@146d8000 {
-			compatible = "qcom,sa8775p-imem", "syscon", "simple-mfd";
+			compatible = "qcom,qcs9100-imem", "syscon", "simple-mfd";
 			reg = <0x0 0x146d8000 0x0 0x1000>;
 			ranges = <0x0 0x0 0x146d8000 0x1000>;
 
@@ -3066,7 +3066,7 @@  pil-reloc@94c {
 		};
 
 		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			compatible = "qcom,qcs9100-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x0 0x15000000 0x0 0x100000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <2>;
@@ -3204,7 +3204,7 @@  apps_smmu: iommu@15000000 {
 		};
 
 		pcie_smmu: iommu@15200000 {
-			compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			compatible = "qcom,qcs9100-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x0 0x15200000 0x0 0x80000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <2>;
@@ -3289,7 +3289,7 @@  intc: interrupt-controller@17a00000 {
 		};
 
 		watchdog@17c10000 {
-			compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt";
+			compatible = "qcom,apss-wdt-qcs9100", "qcom,kpss-wdt";
 			reg = <0x0 0x17c10000 0x0 0x1000>;
 			clocks = <&sleep_clk>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
@@ -3375,14 +3375,14 @@  apps_bcm_voter: bcm-voter {
 			};
 
 			rpmhcc: clock-controller {
-				compatible = "qcom,sa8775p-rpmh-clk";
+				compatible = "qcom,qcs9100-rpmh-clk";
 				#clock-cells = <1>;
 				clock-names = "xo";
 				clocks = <&xo_board_clk>;
 			};
 
 			rpmhpd: power-controller {
-				compatible = "qcom,sa8775p-rpmhpd";
+				compatible = "qcom,qcs9100-rpmhpd";
 				#power-domain-cells = <1>;
 				operating-points-v2 = <&rpmhpd_opp_table>;
 
@@ -3433,7 +3433,7 @@  rpmhpd_opp_turbo_l1: opp-9 {
 		};
 
 		cpufreq_hw: cpufreq@18591000 {
-			compatible = "qcom,sa8775p-cpufreq-epss",
+			compatible = "qcom,qcs9100-cpufreq-epss",
 				     "qcom,cpufreq-epss";
 			reg = <0x0 0x18591000 0x0 0x1000>,
 			      <0x0 0x18593000 0x0 0x1000>;
@@ -3446,7 +3446,7 @@  cpufreq_hw: cpufreq@18591000 {
 		};
 
 		ethernet1: ethernet@23000000 {
-			compatible = "qcom,sa8775p-ethqos";
+			compatible = "qcom,qcs9100-ethqos";
 			reg = <0x0 0x23000000 0x0 0x10000>,
 			      <0x0 0x23016000 0x0 0x100>;
 			reg-names = "stmmaceth", "rgmii";
@@ -3481,7 +3481,7 @@  ethernet1: ethernet@23000000 {
 		};
 
 		ethernet0: ethernet@23040000 {
-			compatible = "qcom,sa8775p-ethqos";
+			compatible = "qcom,qcs9100-ethqos";
 			reg = <0x0 0x23040000 0x0 0x10000>,
 			      <0x0 0x23056000 0x0 0x100>;
 			reg-names = "stmmaceth", "rgmii";
@@ -4495,7 +4495,7 @@  arch_timer: timer {
 	};
 
 	pcie0: pcie@1c00000 {
-		compatible = "qcom,pcie-sa8775p";
+		compatible = "qcom,pcie-qcs9100";
 		reg = <0x0 0x01c00000 0x0 0x3000>,
 		      <0x0 0x40000000 0x0 0xf20>,
 		      <0x0 0x40000f20 0x0 0xa8>,
@@ -4576,7 +4576,7 @@  pcie@0 {
 	};
 
 	pcie0_ep: pcie-ep@1c00000 {
-		compatible = "qcom,sa8775p-pcie-ep";
+		compatible = "qcom,qcs9100-pcie-ep";
 		reg = <0x0 0x01c00000 0x0 0x3000>,
 		      <0x0 0x40000000 0x0 0xf20>,
 		      <0x0 0x40000f20 0x0 0xa8>,
@@ -4623,7 +4623,7 @@  pcie0_ep: pcie-ep@1c00000 {
 	};
 
 	pcie0_phy: phy@1c04000 {
-		compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy";
+		compatible = "qcom,qcs9100-qmp-gen4x2-pcie-phy";
 		reg = <0x0 0x1c04000 0x0 0x2000>;
 
 		clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
@@ -4652,7 +4652,7 @@  pcie0_phy: phy@1c04000 {
 	};
 
 	pcie1: pcie@1c10000 {
-		compatible = "qcom,pcie-sa8775p";
+		compatible = "qcom,pcie-qcs9100";
 		reg = <0x0 0x01c10000 0x0 0x3000>,
 		      <0x0 0x60000000 0x0 0xf20>,
 		      <0x0 0x60000f20 0x0 0xa8>,
@@ -4733,7 +4733,7 @@  pcie@0 {
 	};
 
 	pcie1_ep: pcie-ep@1c10000 {
-		compatible = "qcom,sa8775p-pcie-ep";
+		compatible = "qcom,qcs9100-pcie-ep";
 		reg = <0x0 0x01c10000 0x0 0x3000>,
 		      <0x0 0x60000000 0x0 0xf20>,
 		      <0x0 0x60000f20 0x0 0xa8>,
@@ -4780,7 +4780,7 @@  pcie1_ep: pcie-ep@1c10000 {
 	};
 
 	pcie1_phy: phy@1c14000 {
-		compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy";
+		compatible = "qcom,qcs9100-qmp-gen4x4-pcie-phy";
 		reg = <0x0 0x1c14000 0x0 0x4000>;
 
 		clocks = <&gcc GCC_PCIE_1_AUX_CLK>,