diff mbox series

USB: serial: Change usb_debug to not echo by default

Message ID 20240715104456.1814444-1-marmarek@invisiblethingslab.com (mailing list archive)
State New
Headers show
Series USB: serial: Change usb_debug to not echo by default | expand

Commit Message

Marek Marczykowski-Górecki July 15, 2024, 10:44 a.m. UTC
This driver is intended as a "client" end of the console connection.
When connected to a host it's supposed to receive debug logs, and
possibly allow to interact with whatever debug console is available
there. Feeding messages back, depending on a configuration may cause log
messages be executed as shell commands (which can be really bad if one
is unlucky, imagine a log message like "prevented running `rm -rf
/home`"). In case of Xen, it exposes sysrq-like debug interface, and
feeding it its own logs will pretty quickly hit 'R' for "instant
reboot".

Contrary to a classic serial console, the USB one cannot be configured
ahead of time, as the device shows up only when target OS is up. And at
the time device is opened to execute relevant ioctl, it's already too
late, especially when logs start flowing shortly after device is
initialized.
Avoid the issue by changing default to no echo for this type of devices.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
---
 drivers/usb/serial/usb_debug.c | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Johan Hovold July 31, 2024, 1:21 p.m. UTC | #1
On Mon, Jul 15, 2024 at 12:44:53PM +0200, Marek Marczykowski-Górecki wrote:
> This driver is intended as a "client" end of the console connection.
> When connected to a host it's supposed to receive debug logs, and
> possibly allow to interact with whatever debug console is available
> there. Feeding messages back, depending on a configuration may cause log
> messages be executed as shell commands (which can be really bad if one
> is unlucky, imagine a log message like "prevented running `rm -rf
> /home`").

This should not be an issue as canonical input is also enabled by
default (and as long as no one outputs random commands like that on a
single line).

> In case of Xen, it exposes sysrq-like debug interface, and
> feeding it its own logs will pretty quickly hit 'R' for "instant
> reboot".

But this sounds annoying enough.

> Contrary to a classic serial console, the USB one cannot be configured
> ahead of time, as the device shows up only when target OS is up. And at
> the time device is opened to execute relevant ioctl, it's already too
> late, especially when logs start flowing shortly after device is
> initialized.
> Avoid the issue by changing default to no echo for this type of devices.
> 
> Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
> ---
>  drivers/usb/serial/usb_debug.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
> index 6934970f180d..91150c050637 100644
> --- a/drivers/usb/serial/usb_debug.c
> +++ b/drivers/usb/serial/usb_debug.c
> @@ -76,6 +76,11 @@ static void usb_debug_process_read_urb(struct urb *urb)
>  	usb_serial_generic_process_read_urb(urb);
>  }
>  
> +static void usb_debug_init_termios(struct tty_struct *tty)
> +{
> +	tty->termios.c_lflag &= ~ECHO;

I disabled echoing of newlines here as well when applying. Thanks.

Johan
diff mbox series

Patch

diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 6934970f180d..91150c050637 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -76,6 +76,11 @@  static void usb_debug_process_read_urb(struct urb *urb)
 	usb_serial_generic_process_read_urb(urb);
 }
 
+static void usb_debug_init_termios(struct tty_struct *tty)
+{
+	tty->termios.c_lflag &= ~ECHO;
+}
+
 static struct usb_serial_driver debug_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -86,6 +91,7 @@  static struct usb_serial_driver debug_device = {
 	.bulk_out_size =	USB_DEBUG_MAX_PACKET_SIZE,
 	.break_ctl =		usb_debug_break_ctl,
 	.process_read_urb =	usb_debug_process_read_urb,
+	.init_termios =		usb_debug_init_termios,
 };
 
 static struct usb_serial_driver dbc_device = {
@@ -97,6 +103,7 @@  static struct usb_serial_driver dbc_device = {
 	.num_ports =		1,
 	.break_ctl =		usb_debug_break_ctl,
 	.process_read_urb =	usb_debug_process_read_urb,
+	.init_termios =		usb_debug_init_termios,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {