diff mbox series

[v2] usbip: Add USB_SPEED_SUPER_PLUS as valid arg

Message ID 20240715131131.3876380-1-ukaszb@chromium.org (mailing list archive)
State Accepted
Commit bb548c1654db4a6f1a42657ed9068237e0c044b5
Headers show
Series [v2] usbip: Add USB_SPEED_SUPER_PLUS as valid arg | expand

Commit Message

Łukasz Bartosik July 15, 2024, 1:11 p.m. UTC
Add USB_SPEED_SUPER_PLUS as valid argument to allow
to attach USB SuperSpeed+ devices. Update speed of
virtual HC to SuperSpeed+ as well.

Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
---
Changes v2->v1:
- Updated virtual HC speed to SS+,
- Updated commit message.
---
 drivers/usb/usbip/vhci_hcd.c   | 36 +++++++++++++++++-----------------
 drivers/usb/usbip/vhci_sysfs.c |  3 ++-
 2 files changed, 20 insertions(+), 19 deletions(-)

Comments

Shuah Khan July 17, 2024, 9:27 p.m. UTC | #1
On 7/15/24 07:11, Łukasz Bartosik wrote:
> Add USB_SPEED_SUPER_PLUS as valid argument to allow
> to attach USB SuperSpeed+ devices. Update speed of
> virtual HC to SuperSpeed+ as well.
> 
> Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
> ---
> Changes v2->v1:
> - Updated virtual HC speed to SS+,
> - Updated commit message.
> ---

Thank you.

Acked-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah
diff mbox series

Patch

diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 82650c11e451..fff27c529513 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -372,7 +372,7 @@  static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		}
 		switch (wValue) {
 		case USB_PORT_FEAT_SUSPEND:
-			if (hcd->speed == HCD_USB3) {
+			if (hcd->speed >= HCD_USB3) {
 				pr_err(" ClearPortFeature: USB_PORT_FEAT_SUSPEND req not "
 				       "supported for USB 3.0 roothub\n");
 				goto error;
@@ -388,7 +388,7 @@  static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		case USB_PORT_FEAT_POWER:
 			usbip_dbg_vhci_rh(
 				" ClearPortFeature: USB_PORT_FEAT_POWER\n");
-			if (hcd->speed == HCD_USB3)
+			if (hcd->speed >= HCD_USB3)
 				vhci_hcd->port_status[rhport] &= ~USB_SS_PORT_STAT_POWER;
 			else
 				vhci_hcd->port_status[rhport] &= ~USB_PORT_STAT_POWER;
@@ -404,19 +404,19 @@  static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		break;
 	case GetHubDescriptor:
 		usbip_dbg_vhci_rh(" GetHubDescriptor\n");
-		if (hcd->speed == HCD_USB3 &&
+		if (hcd->speed >= HCD_USB3 &&
 				(wLength < USB_DT_SS_HUB_SIZE ||
 				 wValue != (USB_DT_SS_HUB << 8))) {
 			pr_err("Wrong hub descriptor type for USB 3.0 roothub.\n");
 			goto error;
 		}
-		if (hcd->speed == HCD_USB3)
+		if (hcd->speed >= HCD_USB3)
 			ss_hub_descriptor((struct usb_hub_descriptor *) buf);
 		else
 			hub_descriptor((struct usb_hub_descriptor *) buf);
 		break;
 	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
-		if (hcd->speed != HCD_USB3)
+		if (hcd->speed < HCD_USB3)
 			goto error;
 
 		if ((wValue >> 8) != USB_DT_BOS)
@@ -503,7 +503,7 @@  static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		case USB_PORT_FEAT_LINK_STATE:
 			usbip_dbg_vhci_rh(
 				" SetPortFeature: USB_PORT_FEAT_LINK_STATE\n");
-			if (hcd->speed != HCD_USB3) {
+			if (hcd->speed < HCD_USB3) {
 				pr_err("USB_PORT_FEAT_LINK_STATE req not "
 				       "supported for USB 2.0 roothub\n");
 				goto error;
@@ -521,7 +521,7 @@  static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			usbip_dbg_vhci_rh(
 				" SetPortFeature: USB_PORT_FEAT_U2_TIMEOUT\n");
 			/* TODO: add suspend/resume support! */
-			if (hcd->speed != HCD_USB3) {
+			if (hcd->speed < HCD_USB3) {
 				pr_err("USB_PORT_FEAT_U1/2_TIMEOUT req not "
 				       "supported for USB 2.0 roothub\n");
 				goto error;
@@ -531,7 +531,7 @@  static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			usbip_dbg_vhci_rh(
 				" SetPortFeature: USB_PORT_FEAT_SUSPEND\n");
 			/* Applicable only for USB2.0 hub */
-			if (hcd->speed == HCD_USB3) {
+			if (hcd->speed >= HCD_USB3) {
 				pr_err("USB_PORT_FEAT_SUSPEND req not "
 				       "supported for USB 3.0 roothub\n");
 				goto error;
@@ -551,7 +551,7 @@  static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				pr_err("invalid port number %d\n", wIndex);
 				goto error;
 			}
-			if (hcd->speed == HCD_USB3)
+			if (hcd->speed >= HCD_USB3)
 				vhci_hcd->port_status[rhport] |= USB_SS_PORT_STAT_POWER;
 			else
 				vhci_hcd->port_status[rhport] |= USB_PORT_STAT_POWER;
@@ -564,7 +564,7 @@  static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				goto error;
 			}
 			/* Applicable only for USB3.0 hub */
-			if (hcd->speed != HCD_USB3) {
+			if (hcd->speed < HCD_USB3) {
 				pr_err("USB_PORT_FEAT_BH_PORT_RESET req not "
 				       "supported for USB 2.0 roothub\n");
 				goto error;
@@ -578,7 +578,7 @@  static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				goto error;
 			}
 			/* if it's already enabled, disable */
-			if (hcd->speed == HCD_USB3) {
+			if (hcd->speed >= HCD_USB3) {
 				vhci_hcd->port_status[rhport] = 0;
 				vhci_hcd->port_status[rhport] =
 					(USB_SS_PORT_STAT_POWER |
@@ -602,7 +602,7 @@  static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			}
 			if (wValue >= 32)
 				goto error;
-			if (hcd->speed == HCD_USB3) {
+			if (hcd->speed >= HCD_USB3) {
 				if ((vhci_hcd->port_status[rhport] &
 				     USB_SS_PORT_STAT_POWER) != 0) {
 					vhci_hcd->port_status[rhport] |= (1 << wValue);
@@ -616,7 +616,7 @@  static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		break;
 	case GetPortErrorCount:
 		usbip_dbg_vhci_rh(" GetPortErrorCount\n");
-		if (hcd->speed != HCD_USB3) {
+		if (hcd->speed < HCD_USB3) {
 			pr_err("GetPortErrorCount req not "
 			       "supported for USB 2.0 roothub\n");
 			goto error;
@@ -626,7 +626,7 @@  static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		break;
 	case SetHubDepth:
 		usbip_dbg_vhci_rh(" SetHubDepth\n");
-		if (hcd->speed != HCD_USB3) {
+		if (hcd->speed < HCD_USB3) {
 			pr_err("SetHubDepth req not supported for "
 			       "USB 2.0 roothub\n");
 			goto error;
@@ -646,7 +646,7 @@  static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		if (!invalid_rhport) {
 			dump_port_status_diff(prev_port_status[rhport],
 					      vhci_hcd->port_status[rhport],
-					      hcd->speed == HCD_USB3);
+					      hcd->speed >= HCD_USB3);
 		}
 	}
 	usbip_dbg_vhci_rh(" bye\n");
@@ -1154,8 +1154,8 @@  static int vhci_setup(struct usb_hcd *hcd)
 	} else {
 		vhci->vhci_hcd_ss = hcd_to_vhci_hcd(hcd);
 		vhci->vhci_hcd_ss->vhci = vhci;
-		hcd->speed = HCD_USB3;
-		hcd->self.root_hub->speed = USB_SPEED_SUPER;
+		hcd->speed = HCD_USB31;
+		hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
 	}
 
 	/*
@@ -1316,7 +1316,7 @@  static const struct hc_driver vhci_hc_driver = {
 	.product_desc	= driver_desc,
 	.hcd_priv_size	= sizeof(struct vhci_hcd),
 
-	.flags		= HCD_USB3 | HCD_SHARED,
+	.flags		= HCD_USB31 | HCD_SHARED,
 
 	.reset		= vhci_setup,
 	.start		= vhci_start,
diff --git a/drivers/usb/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c
index e2847cd3e6e3..d5865460e82d 100644
--- a/drivers/usb/usbip/vhci_sysfs.c
+++ b/drivers/usb/usbip/vhci_sysfs.c
@@ -283,6 +283,7 @@  static int valid_args(__u32 *pdev_nr, __u32 *rhport,
 	case USB_SPEED_HIGH:
 	case USB_SPEED_WIRELESS:
 	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
 		break;
 	default:
 		pr_err("Failed attach request for unsupported USB speed: %s\n",
@@ -349,7 +350,7 @@  static ssize_t attach_store(struct device *dev, struct device_attribute *attr,
 	vhci_hcd = hcd_to_vhci_hcd(hcd);
 	vhci = vhci_hcd->vhci;
 
-	if (speed == USB_SPEED_SUPER)
+	if (speed >= USB_SPEED_SUPER)
 		vdev = &vhci->vhci_hcd_ss->vdev[rhport];
 	else
 		vdev = &vhci->vhci_hcd_hs->vdev[rhport];