[v5,4/5] PCI: Allow Ryzen XHCI controllers into D3cold and drop delays

Commit Message

Mario Limonciello Aug. 23, 2024, 3:40 p.m. UTC

From: Mario Limonciello <[e-mail]>

As the PCI core now has a delay after D3cold exit, the Ryzen XHCI
controllers that were quirked to not use D3cold and to add a delay
on D3hot no longer need these quirks.

Drop both the PCI and XHCI sets of quirks.

Signed-off-by: Mario Limonciello <[e-mail]>
---
 drivers/pci/quirks.c        | 17 -----------------
 drivers/usb/host/xhci-pci.c | 11 -----------
 2 files changed, 28 deletions(-)

Patch

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index a2ce4e08edf5a..3480a0445ff50 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2059,23 +2059,6 @@  DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
 			      PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8,
 			      quirk_nvidia_hda_pm);
 
-/*
- * Ryzen5/7 XHCI controllers fail upon resume from runtime suspend or s2idle.
- * https://bugzilla.kernel.org/show_bug.cgi?id=205587
- *
- * The kernel attempts to transition these devices to D3cold, but that seems
- * to be ineffective on the platforms in question; the PCI device appears to
- * remain on in D3hot state. The D3hot-to-D0 transition then requires an
- * extended delay in order to succeed.
- */
-static void quirk_ryzen_xhci_d3hot(struct pci_dev *dev)
-{
-	quirk_d3hot_delay(dev, 20);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e0, quirk_ryzen_xhci_d3hot);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e1, quirk_ryzen_xhci_d3hot);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x1639, quirk_ryzen_xhci_d3hot);
-
 #ifdef CONFIG_X86_IO_APIC
 static int dmi_disable_ioapicreroute(const struct dmi_system_id *d)
 {
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index dc1e345ab67ea..d726810a04838 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -316,10 +316,6 @@  static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1)))
 		xhci->quirks |= XHCI_U2_DISABLE_WAKE;
 
-	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
-		pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI)
-		xhci->quirks |= XHCI_BROKEN_D3COLD_S2I;
-
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
 		xhci->quirks |= XHCI_LPM_SUPPORT;
 		xhci->quirks |= XHCI_INTEL_HOST;
@@ -752,13 +748,6 @@  static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
 		pci_d3cold_disable(pdev);
 
-#ifdef CONFIG_SUSPEND
-	/* d3cold is broken, but only when s2idle is used */
-	if (pm_suspend_target_state == PM_SUSPEND_TO_IDLE &&
-	    xhci->quirks & (XHCI_BROKEN_D3COLD_S2I))
-		pci_d3cold_disable(pdev);
-#endif
-
 	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
 		xhci_pme_quirk(hcd);