| Message ID | 20240927072557.74194-1-michael@allwinnertech.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [1/2] usb: dwc3: core: add Gen2 polarity detection support | expand |
On Fri, Sep 27, 2024 at 03:25:56PM +0800, Michael Wu wrote: > According to the DWC31 Enhanced SuperSpeed USB3.1 Controller Programming > Guide, for Gen2 polarity detection, link uses data block (0011b) sync > header for SYNC OS instead of control block (1100b). > > Added 'snps,inv-sync-hdr-quirk' a DT property to set this bit 30 of > LLUCTL if the third-party PHY doesn't correct the sync header of the > SYNC OS in the case of inverse polarity. > > Signed-off-by: Michael Wu <michael@allwinnertech.com> > --- > drivers/usb/dwc3/core.c | 24 ++++++++++++++++-------- > drivers/usb/dwc3/core.h | 6 ++++++ > 2 files changed, 22 insertions(+), 8 deletions(-) > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index 734de2a8bd212..72fddfcbdd0c3 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -1434,15 +1434,20 @@ static int dwc3_core_init(struct dwc3 *dwc) > > dwc3_config_threshold(dwc); > > - /* > - * Modify this for all supported Super Speed ports when > - * multiport support is added. > - */ > - if (hw_mode != DWC3_GHWPARAMS0_MODE_GADGET && > - (DWC3_IP_IS(DWC31)) && > - dwc->maximum_speed == USB_SPEED_SUPER) { > + if (DWC3_IP_IS(DWC31)) { > reg = dwc3_readl(dwc->regs, DWC3_LLUCTL); > - reg |= DWC3_LLUCTL_FORCE_GEN1; > + > + /* > + * Modify this for all supported Super Speed ports when > + * multiport support is added. > + */ > + if (hw_mode != DWC3_GHWPARAMS0_MODE_GADGET && > + dwc->maximum_speed == USB_SPEED_SUPER) > + reg |= DWC3_LLUCTL_FORCE_GEN1; > + > + if (dwc->inv_sync_hdr_quirk) > + reg |= DWC3_LLUCTL_INV_SYNC_HDR; > + > dwc3_writel(dwc->regs, DWC3_LLUCTL, reg); > } > > @@ -1774,6 +1779,9 @@ static void dwc3_get_properties(struct dwc3 *dwc) > dwc->dis_split_quirk = device_property_read_bool(dev, > "snps,dis-split-quirk"); > > + dwc->inv_sync_hdr_quirk = device_property_read_bool(dev, > + "snps,inv-sync-hdr-quirk"); Bindings are *always* before their users. Best regards, Krzysztof
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 734de2a8bd212..72fddfcbdd0c3 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1434,15 +1434,20 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_config_threshold(dwc); - /* - * Modify this for all supported Super Speed ports when - * multiport support is added. - */ - if (hw_mode != DWC3_GHWPARAMS0_MODE_GADGET && - (DWC3_IP_IS(DWC31)) && - dwc->maximum_speed == USB_SPEED_SUPER) { + if (DWC3_IP_IS(DWC31)) { reg = dwc3_readl(dwc->regs, DWC3_LLUCTL); - reg |= DWC3_LLUCTL_FORCE_GEN1; + + /* + * Modify this for all supported Super Speed ports when + * multiport support is added. + */ + if (hw_mode != DWC3_GHWPARAMS0_MODE_GADGET && + dwc->maximum_speed == USB_SPEED_SUPER) + reg |= DWC3_LLUCTL_FORCE_GEN1; + + if (dwc->inv_sync_hdr_quirk) + reg |= DWC3_LLUCTL_INV_SYNC_HDR; + dwc3_writel(dwc->regs, DWC3_LLUCTL, reg); } @@ -1774,6 +1779,9 @@ static void dwc3_get_properties(struct dwc3 *dwc) dwc->dis_split_quirk = device_property_read_bool(dev, "snps,dis-split-quirk"); + dwc->inv_sync_hdr_quirk = device_property_read_bool(dev, + "snps,inv-sync-hdr-quirk"); + dwc->lpm_nyet_threshold = lpm_nyet_threshold; dwc->tx_de_emphasis = tx_de_emphasis; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 1e561fd8b86e2..5e5971e50bc09 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -673,6 +673,9 @@ /* Force Gen1 speed on Gen2 link */ #define DWC3_LLUCTL_FORCE_GEN1 BIT(10) +/* Link uses data block sync header for Gen2 polarity detection */ +#define DWC3_LLUCTL_INV_SYNC_HDR BIT(30) + /* Structures */ struct dwc3_trb; @@ -1146,6 +1149,8 @@ struct dwc3_scratchpad_array { * 3 - Reserved * @dis_metastability_quirk: set to disable metastability quirk. * @dis_split_quirk: set to disable split boundary. + * @inv_sync_hdr_quirk: set if the third-party PHY does not correct the sync + * header of the SYNC OS in case of inverse polarity. * @sys_wakeup: set if the device may do system wakeup. * @wakeup_configured: set if the device is configured for remote wakeup. * @suspended: set to track suspend event due to U3/L2. @@ -1376,6 +1381,7 @@ struct dwc3 { unsigned dis_metastability_quirk:1; unsigned dis_split_quirk:1; + unsigned inv_sync_hdr_quirk:1; unsigned async_callbacks:1; unsigned sys_wakeup:1; unsigned wakeup_configured:1;
According to the DWC31 Enhanced SuperSpeed USB3.1 Controller Programming Guide, for Gen2 polarity detection, link uses data block (0011b) sync header for SYNC OS instead of control block (1100b). Added 'snps,inv-sync-hdr-quirk' a DT property to set this bit 30 of LLUCTL if the third-party PHY doesn't correct the sync header of the SYNC OS in the case of inverse polarity. Signed-off-by: Michael Wu <michael@allwinnertech.com> --- drivers/usb/dwc3/core.c | 24 ++++++++++++++++-------- drivers/usb/dwc3/core.h | 6 ++++++ 2 files changed, 22 insertions(+), 8 deletions(-)