diff mbox series

[v1] usb: dwc3: Correct some typos in comments

Message ID 20240929075856.11516-1-shenlichuan@vivo.com (mailing list archive)
State Superseded
Headers show
Series [v1] usb: dwc3: Correct some typos in comments | expand

Commit Message

Shen Lichuan Sept. 29, 2024, 7:58 a.m. UTC
Fixed some confusing typos that were currently identified with codespell,
the details are as follows:

-in the code comments:
drivers/usb/dwc3/core.c:1406: feild ==> field
drivers/usb/dwc3/core.h:84: boundries ==> boundaries
drivers/usb/dwc3/ep0.c:148: issueing ==> issuing
drivers/usb/dwc3/host.c:38: temperary ==> temporary

Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
---
 drivers/usb/dwc3/core.c | 2 +-
 drivers/usb/dwc3/core.h | 2 +-
 drivers/usb/dwc3/ep0.c  | 2 +-
 drivers/usb/dwc3/host.c | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

Comments

Sergey Shtylyov Sept. 29, 2024, 9:40 a.m. UTC | #1
On 9/29/24 10:58, Shen Lichuan wrote:

> Fixed some confusing typos that were currently identified with codespell,
> the details are as follows:
> 
> -in the code comments:
> drivers/usb/dwc3/core.c:1406: feild ==> field
> drivers/usb/dwc3/core.h:84: boundries ==> boundaries
> drivers/usb/dwc3/ep0.c:148: issueing ==> issuing
> drivers/usb/dwc3/host.c:38: temperary ==> temporary
> 
> Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
[...]

> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
> index e0533cee6870..60f7a55e1ea3 100644
> --- a/drivers/usb/dwc3/host.c
> +++ b/drivers/usb/dwc3/host.c
> @@ -35,7 +35,7 @@ static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc)
>  	u32 reg;
>  	int i;
>  
> -	/* xhci regs is not mapped yet, do it temperary here */
> +	/* xhci regs is not mapped yet, do it temporary here */

   s/is/are/. And maybe "temporarily"? :-)

>  	if (dwc->xhci_resources[0].start) {
>  		xhci_regs = ioremap(dwc->xhci_resources[0].start, DWC3_XHCI_REGS_END);
>  		if (!xhci_regs) {

MBR, Sergey
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9eb085f359ce..3612a57f7877 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1403,7 +1403,7 @@  static int dwc3_core_init(struct dwc3 *dwc)
 
 	/*
 	 * When configured in HOST mode, after issuing U3/L2 exit controller
-	 * fails to send proper CRC checksum in CRC5 feild. Because of this
+	 * fails to send proper CRC checksum in CRC5 field. Because of this
 	 * behaviour Transaction Error is generated, resulting in reset and
 	 * re-enumeration of usb device attached. All the termsel, xcvrsel,
 	 * opmode becomes 0 during end of resume. Enabling bit 10 of GUCTL1
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index c71240e8f7c7..2cb88e08e746 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -81,7 +81,7 @@ 
 #define DWC3_GSNPSREV_MASK	0xffff
 #define DWC3_GSNPS_ID(p)	(((p) & DWC3_GSNPSID_MASK) >> 16)
 
-/* DWC3 registers memory space boundries */
+/* DWC3 registers memory space boundaries */
 #define DWC3_XHCI_REGS_START		0x0
 #define DWC3_XHCI_REGS_END		0x7fff
 #define DWC3_GLOBALS_REGS_START		0xc100
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index c9533a99e47c..f3d97ad5156e 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -145,7 +145,7 @@  static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
 	 * Unfortunately we have uncovered a limitation wrt the Data Phase.
 	 *
 	 * Section 9.4 says we can wait for the XferNotReady(DATA) event to
-	 * come before issueing Start Transfer command, but if we do, we will
+	 * come before issuing Start Transfer command, but if we do, we will
 	 * miss situations where the host starts another SETUP phase instead of
 	 * the DATA phase.  Such cases happen at least on TD.7.6 of the Link
 	 * Layer Compliance Suite.
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index e0533cee6870..60f7a55e1ea3 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -35,7 +35,7 @@  static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc)
 	u32 reg;
 	int i;
 
-	/* xhci regs is not mapped yet, do it temperary here */
+	/* xhci regs is not mapped yet, do it temporary here */
 	if (dwc->xhci_resources[0].start) {
 		xhci_regs = ioremap(dwc->xhci_resources[0].start, DWC3_XHCI_REGS_END);
 		if (!xhci_regs) {