From patchwork Fri Nov 1 16:29:41 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Abel Vesa X-Patchwork-Id: 13859583 Received: from mail-wm1-f53.google.com (mail-wm1-f53.google.com [209.85.128.53]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 06F371CB330 for ; Fri, 1 Nov 2024 16:30:06 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.53 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730478611; cv=none; b=mKjrlLF0yRu41J3ude1HrK2bt9naao9Dg91+KNIbB735LHsF9sduGSJ0bN72KUogGn/J8I9sYcneoyn7ft2Ggw4/jl543AFoLNVWsDDhPTj1aEBwyCHwohGyowmU74y5QVUq3v4nE6+6Nux31bhXz6JOySmmiPE6jWZrtWoKcdQ= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730478611; c=relaxed/simple; bh=fvqRWCnhqTWRYR0qCfEtiUKEvFK2Xv3m1iHGeOgjG6I=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=i1OjupJw5f/2/eTSQPAAFv0lVNE3AcgGHjbxzIdSOOlBrxQrnX/LKNnDvYrohViFD5Y0j7iQSi+qxXUXAoRWVYCOWpcqqcoSly+BF8gH8Q3c/oktWQ0d96dE0oqG+ZJN55/6FRueMsZaro/iK07UIkewiBW9MvnisaDl8NVPZls= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org; spf=pass smtp.mailfrom=linaro.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b=D1FpjEci; arc=none smtp.client-ip=209.85.128.53 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linaro.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="D1FpjEci" Received: by mail-wm1-f53.google.com with SMTP id 5b1f17b1804b1-431688d5127so16870565e9.0 for ; Fri, 01 Nov 2024 09:30:06 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1730478605; x=1731083405; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=PpSG0KbFWIwPxeEfiKRS/i3AtHJBvLnd/ul+P4U8Wnw=; b=D1FpjEciuNWqia7RGt/em9jXL+EY6ChjXKN1fWvHQxrvI64p7MacN54TQQ6bgF0e2E 4OaKnOapCGFRcSlURZA3APXLSPsAr/1rDodibmZ7dmjCYBS49+nTnoQjNSLTombw16L9 cWF7pXp84LWxq+j0LfWLAZnrgXete103sTNfmJ6yHvIr5xrLV0oyYfSfgb7oxL+GZE3G cI+duCGg5u1BDgZArgUpH6ZmQRvyUatDKdbeOF7pRLURudOUkzqWJsa4bl8hsP8Jua0E ClgYTwFhZT1mVbZ8Nx1vtwwO/dNSvgt+faqWEWjzu4UiLNvVvyhCIwwnsw7nqyz1eg53 vnBQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1730478605; x=1731083405; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=PpSG0KbFWIwPxeEfiKRS/i3AtHJBvLnd/ul+P4U8Wnw=; b=oacpy33lYgx//bkgdEsOXrz8zi5dH0dvsZV2UmML5DJ1D2wQZdp9c0kiF2etoh6CnP 6IFFksUsm0yehE9wYPdziEZAvSU8VdaJq6N/RJ68IP61cpCUHAxncIU5OJqWx29nRF2b BfTI/xPU4dnMrYlhWxP31PTJAcKD2A/ayInYLbwnM0YqbdNMKRRddsFIckM5CDdCWoG2 qywrS8kReCVj2uhgPj4XUZIOXUCit4Qmex2mp3GrvJaRrsbP25A4a7YvIoNqV6xUi/G9 oH40gPNoK2vD+NCWyhuid6ZMAZ4JCMl+Dvt3xdIlygHBtMb6YBT5ucP0xHRjd1oxf9Se WCGg== X-Forwarded-Encrypted: i=1; AJvYcCW5/sDkIC9Xz0VmfB+L5GFxGy87vRGvGYk7wMKM/V1sbL/b4jO4LP8ZDhNybWhHDrlj0+YM8cjNsGU=@vger.kernel.org X-Gm-Message-State: AOJu0Yzq99Hzlg3AAuEKir24ftgA+UV5ErKgNmbwm5gxNgnJC8xsyCKm l36mEdfzT/Nj5egnqFdpietGlYgg3eyNiqd2oJBZj2npaxbvxg3wsDFLb8Oz9to= X-Google-Smtp-Source: AGHT+IGcK10nlslb6n1eh9n6HETGgFQjuP75q0+mHaMB3bYJX82tRBsdIRBW+ZykoBpZfn3pIJbtPg== X-Received: by 2002:a05:600c:4eca:b0:431:5c1c:71b6 with SMTP id 5b1f17b1804b1-4319acad842mr255121995e9.17.1730478605386; Fri, 01 Nov 2024 09:30:05 -0700 (PDT) Received: from [127.0.1.1] ([82.76.168.176]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-4327d69845csm66697555e9.47.2024.11.01.09.30.03 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 01 Nov 2024 09:30:04 -0700 (PDT) From: Abel Vesa Date: Fri, 01 Nov 2024 18:29:41 +0200 Subject: [PATCH v4 3/4] arm64: dts: qcom: x1e80100-crd: Describe the Parade PS8830 retimers Precedence: bulk X-Mailing-List: linux-usb@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20241101-x1e80100-ps8830-v4-3-f0f7518b263e@linaro.org> References: <20241101-x1e80100-ps8830-v4-0-f0f7518b263e@linaro.org> In-Reply-To: <20241101-x1e80100-ps8830-v4-0-f0f7518b263e@linaro.org> To: Heikki Krogerus , Greg Kroah-Hartman , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, Bjorn Andersson , Konrad Dybcio , Rajendra Nayak , Sibi Sankar , Johan Hovold , Dmitry Baryshkov , Trilok Soni , linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, Abel Vesa X-Mailer: b4 0.15-dev-dedf8 X-Developer-Signature: v=1; a=openpgp-sha256; l=11877; i=abel.vesa@linaro.org; h=from:subject:message-id; bh=fvqRWCnhqTWRYR0qCfEtiUKEvFK2Xv3m1iHGeOgjG6I=; b=owEBbQKS/ZANAwAKARtfRMkAlRVWAcsmYgBnJQICLY8TkS70HaIhxlBKYI3Ka1QS7pFaal6tS NnEdLiB9MGJAjMEAAEKAB0WIQRO8+4RTnqPKsqn0bgbX0TJAJUVVgUCZyUCAgAKCRAbX0TJAJUV VuXEEAC3wB4jrc5s0uITI41hfZXZv+1KxdlMYsZ5U3HHZpIvQ+Gvy51avgPEEsN1Pc/WOYSN1aU iLeYGjfqcRPGeLRXD2XaTRJLeNZzoq5ebnHkpEiKLAX3SX2VcX+/G2p1T9DyzkrHic8sXzomNDX gaUYvjxR/a5PigBsvrJ7mtrsz4cM1dZJdIg0rHXcqbDUayQBEVfwELq9Z8YiSTFlWWejJw1r5B6 OoOkLmOGwLD9v7XxrPhS2ApApfyy+0c/DH4Ug1EImptddtateEDSkPx6pEiuKbX1GOc/y2meLq9 VH3N7Seg6rVBMw96xPRkjoqs/rzhZWMNJ5+mmSTXIgyHA+u19Y9i33BPk63wr82w6JAq5/4XSAF aWbHFNtYORBOdExSCGrHUJoYZTmHLo5NC1aRunytnhHKw1cHJZo8XS9tWfWiBwqFYR6FTdXawR9 OFcIdPpY0IbGVcMMzn9SnbFlEZT18UJbVQkK1QJhs2bpURW0Sc8MCqBM08r1oDu2rjdFNbZts/s JWMhmUYgZBFT4h+OO0FV4mlTRXnR+wVGFhYtKQ1arn0iDOUSA9lCFlFArOVHgsIKG2ndOg0fNS9 ph1iXqfTjI1dDy4/kpDv2tn2jFnmVngmS1fFX+L6YRQC0QfZ2nxOtAycusda1ME8YMR35AEKMWH 0GUAsqC+1yLuA1A== X-Developer-Key: i=abel.vesa@linaro.org; a=openpgp; fpr=6AFF162D57F4223A8770EF5AF7BF214136F41FAE The X Elite CRD board comes with 3 Parade PS8830 retimers, one for each Type-C port. These handle the orientation and altmode switching and are controlled over I2C. In the connection chain, they sit between the USB/DisplayPort combo PHY and the Type-C connector. Describe the retimers and all gpio controlled voltage regulators used by each retimer. Also, modify the pmic glink graph to include the retimers in between the SuperSpeed/Sideband in endpoints and the QMP PHY out endpoints. Signed-off-by: Abel Vesa --- arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 439 +++++++++++++++++++++++++++++- 1 file changed, 433 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index 279697f2c72890a6d379aa0c153171960e44bd63..6e1b9e1d227ce0a3607af708e2438be33424eec5 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -99,7 +99,15 @@ port@1 { reg = <1>; pmic_glink_ss0_ss_in: endpoint { - remote-endpoint = <&usb_1_ss0_qmpphy_out>; + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; }; }; }; @@ -128,7 +136,15 @@ port@1 { reg = <1>; pmic_glink_ss1_ss_in: endpoint { - remote-endpoint = <&usb_1_ss1_qmpphy_out>; + remote-endpoint = <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss1_con_sbu_out>; }; }; }; @@ -157,7 +173,15 @@ port@1 { reg = <1>; pmic_glink_ss2_ss_in: endpoint { - remote-endpoint = <&usb_1_ss2_qmpphy_out>; + remote-endpoint = <&retimer_ss2_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss2_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss2_con_sbu_out>; }; }; }; @@ -293,6 +317,150 @@ vreg_nvme: regulator-nvme { regulator-boot-on; }; + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr2_1p15: regulator-rtmr2-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR2_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb2_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr2_1p8: regulator-rtmr2-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR2_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb2_pwr_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr2_3p3: regulator-rtmr2-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR2_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb2_pwr_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; @@ -711,6 +879,178 @@ keyboard@3a { }; }; +&i2c1 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK5>; + + vdd-supply = <&vreg_rtmr2_1p15>; + vdd33-supply = <&vreg_rtmr2_3p3>; + vdd33-cap-supply = <&vreg_rtmr2_3p3>; + vddar-supply = <&vreg_rtmr2_1p15>; + vddat-supply = <&vreg_rtmr2_1p15>; + vddio-supply = <&vreg_rtmr2_1p8>; + + reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr2_default>; + pinctrl-names = "default"; + + orientation-switch; + retimer-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss2_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss2_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss2_ss_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss2_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss2_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK3>; + + vdd-supply = <&vreg_rtmr0_1p15>; + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + vddio-supply = <&vreg_rtmr0_1p8>; + + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr0_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c7 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + + vdd-supply = <&vreg_rtmr1_1p15>; + vdd33-supply = <&vreg_rtmr1_3p3>; + vdd33-cap-supply = <&vreg_rtmr1_3p3>; + vddar-supply = <&vreg_rtmr1_1p15>; + vddat-supply = <&vreg_rtmr1_1p15>; + vddio-supply = <&vreg_rtmr1_1p8>; + + reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr1_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; + }; + }; + + }; + }; +}; + &i2c8 { clock-frequency = <400000>; @@ -856,6 +1196,28 @@ &pcie6a_phy { status = "okay"; }; +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins = "gpio10"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; + + usb0_3p3_reg_en: usb0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; +}; + +&pm8550ve_9_gpios { + usb0_1p8_reg_en: usb0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; +}; + &pmc8380_3_gpios { edp_bl_en: edp-bl-en-state { pins = "gpio4"; @@ -866,6 +1228,15 @@ edp_bl_en: edp-bl-en-state { }; }; +&pmc8380_5_gpios { + usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + }; +}; + &qupv3_0 { status = "okay"; }; @@ -1095,6 +1466,62 @@ wake-n-pins { }; }; + usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state { + pins = "gpio188"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state { + pins = "gpio186"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_default: rtmr1-reset-n-active-state { + pins = "gpio176"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state { + pins = "gpio189"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state { + pins = "gpio126"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state { + pins = "gpio187"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr2_default: rtmr2-reset-n-active-state { + pins = "gpio185"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + tpad_default: tpad-default-state { pins = "gpio3"; function = "gpio"; @@ -1162,7 +1589,7 @@ &usb_1_ss0_dwc3_hs { }; &usb_1_ss0_qmpphy_out { - remote-endpoint = <&pmic_glink_ss0_ss_in>; + remote-endpoint = <&retimer_ss0_ss_in>; }; &usb_1_ss1_hsphy { @@ -1190,7 +1617,7 @@ &usb_1_ss1_dwc3_hs { }; &usb_1_ss1_qmpphy_out { - remote-endpoint = <&pmic_glink_ss1_ss_in>; + remote-endpoint = <&retimer_ss1_ss_in>; }; &usb_1_ss2_hsphy { @@ -1218,5 +1645,5 @@ &usb_1_ss2_dwc3_hs { }; &usb_1_ss2_qmpphy_out { - remote-endpoint = <&pmic_glink_ss2_ss_in>; + remote-endpoint = <&retimer_ss2_ss_in>; };